BENCH
CAUTION: You must read this before you proceed.
CAUTION : This Bench is NOT a TOY. Keep your child / children at bay
in the process of assembly.
For turning the Bench and to prevent damage to the Bench, 02 persons
may be needed to execute this action.
1 of 7
Before Beginning Assembly:
No. Picture Description Qty
A Backrest Panel 1
B1 Right Arm with Leg 1
B2 Left Arm with Leg 1
C Seat Panel 1
2 of 7
No. Picture Description Qty
①
②
③
④
Screw (M7*70mm) 5
Screw (M7*60mm) 6
Bolt (M6*70mm) 3
Allen Key 2
OVER VIEW
Backrest Panel (A)
Right Arm Panel(B1)
Left Arm
Panel(B2)
Seat Panel (C)
FRONT VIEW
This Bench has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the Bench, the above picture is to help you
put the various parts into perspective. Please read through the instructions here
below to familiarise the parts and steps before assembly.
3 of 7
Step 1
B1
B2
The best place to assemble this arm Bench is on a flat surface, eg., floor.
Position Parts Backrest (A) and Seat Panel (C) as shown in picture above.
Affix 1st Right Arm Panel (B1) ( facing skywards ), as shown above.
Attach Arm Panel(B1) and Backrest Panel(A) by using 1 Screw(②)+Allen
Key(④)
Attach Arm Panel(B1) and Seat Panel(C) by using 2 Screws(①)+Allen Key(④)
Then, flip chair to rest on 1st Arm(B1) so that 2nd Arm (B2) is now facing
skywards.
Repeat the same process by affixing Screws to designated points.
CAUTION: DO NOT TIGHTEN SCREWS
4 of 7
Step 2
A
BACK VIEW OF BENCH.
A
Use Bolt (③) with Allen Key (④) to affix the top of the Backrest (A) to the
Armrests on both sides as shown.
DO NOT TIGHTEN BOLTS
Step 3
C
Use Screw (②) and Allen Key (④) to attach Backrest Panel (A) and Seat Panel
(C).
DO NOT TIGHTEN SCREWS
5 of 7
Step 4
Turn the Bench right side up.
Inspect it and make sure all parts are adequately connected.
Ensure all bolts and screws are fully locked into position and secured.
The Bench is ready to be used.
This Bench can only be used on a flat, level surface.
6 of 7
7 of 7
Loading...