COFFEE TABLE
CAUTION: You must read this before you proceed.
CAUTION : This Table is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Table and to prevent damage to the Table, 02 persons may be needed to
execute this action.
1 of 6
No. Picture Description Qty
①
②
A Table Top 1
B1 Right Side Panel 1
B2 Left Side Panel 1
C Support Bar 1
No. Picture Description Qty
Before Beginning Assembly:
Screw (M7*70mm) 7
Allen Key(4*98mm) 2
2 of 6
OVER VIEW
Table Top (A)
Right Side
Panel(B1)
Support Bar(C)
Left Side
Panel(B2)
FRONT VIEW
This Table has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the Table, the above picture is to help
you put the various parts into perspective. Please read through the
instructions here below to familiarise the parts and steps before assembly.
Step 1
Left Side
Put the Right side Panel(B1) &Left Side Panel(B2) on the table for easiest assembling
position.
Right Side
Panel (B1)
3 of 6
Step 2
Left Side
Panel(B2)
Right Side
Panel(B1)
(C)
2
1
1
Using Screws (①) to connect the two Side Panel (B1&B2) with Support Bar(C) as
shown.
Do not tighten completely.
Step 3
Table Top(A)
Right Side
Panel(B1)
1
2
2
Table Top(A)
1
2
Left Side
Using Screw (①) to connect Right Side Panels (B1) to Table Top (A).
Fix the Right Side Panel B1 by using Screw (①) with Allen Key (②).
Repeat the same process for the Left side Panel (B2)
Do not tighten completely.
4 of 6
Step 4
Inspect it and make sure all parts are adequately connected.
In a sequential manner, ensure all screws are fully locked into position and secured.
The Coffee Table is ready to be used.
CAUTION : When tightening these screws, tighten sequentially.
DO NOT tighten any screw fully and then towards the next one.
This would cause the frame to warp.
If there is still wobbles, loosen the screws and execute this same drop tests.
IF TABLE IS NOT STABLE , IT COULD LEAD TO DAMAGING THE PRODUCT.
5 of 6
6 of 6
Loading...