Page 1
Label Picture Description QTY
A Seat Base 1
B Backrest 1
C Seat Cushion 1
Assembly Instructions
Caution: You must read this before you proceed
Chair
Parts List
Page 1 OF 11
Page 2
D Back Cushion 1
E Left Arm 1
F Right Arm 1
G Front Seat Board 1
H
Wooden Leg with 1
Plastic Gasket
4
Hardwares List
Plastic Gasket 3
Page 2 OF 11
Page 3
Before
Begining
Assembly:
Assembly Preparation
Page 3 OF 11
Page 4
Assembly Steps
This Chair has multiple parts and may require about 30 minutes to assemble. To give you
an overview of the Loveseat parts, the above picture is to help you put the various parts
into perspective. Please read through the instructions below to familiarise yourself with the
parts and steps before assembly.
Wooden Leg with 1 plastic
Gasket(H)
FRONT FACING
Backrest(B)
Seat Cushion(C)
Right Arm (F)
Back Cushion(D)
Wooden Leg with 1
Plastic Gasket(H)
Left Arm (E)
Front Seat Board(G)
Page 4 OF 11
Page 5
Step 1
Step 2
Open the Small Carton to take out the Wooden Leg with 1 Plastic Gasket(H) with 3 Plastic
Gasket(①).
Take the Seat Base(A), Backrest(B), Seat Cushion(C), Back Cushion(D), Left Arm (E),
Right Arm (F), Front Seat Board(G), and Small carton out from the carton and place them
on a clean, non-marring surface.
A
B
C
D
E
F
G
Bubble Pack
H
Small Carton
Caton Package
①
Page 5 OF 11
Page 6
Carefully install the Legs with 1 Plastic Gaskets(①) at the bottom of the Left Arm(E) and
Right Arm(F).
Insert threaded stem into the mounting position at the corner of the Left Arm(E) and Right
Arm(F). Tighten by turning the Legs clockwise.
Take care of the shape of the Legs and ensure they in the correct postions.
Note:The use of Plastic Gasket are OPTIONAL and are especially useful to help alleviate
slight wobbleness. Some Legs may need more than one gasket while some legs may not
need anyny.
Step 3
E
F
H
H
H
H
E
F
Page 6 OF 11
Page 7
With assistance from your adult partner, postion the Left Arm (E) and Right Arm (F) as
picture, hold up the Front Seat Board(G) and stand front the both Arms, assemble the
Front Seat Board(G) by putting the metal hook on the two raised metal support points on
the front side of both arms, do it one by one and make sure into position.
Step 3
E
F
G
G
G
F
E
Page 7 OF 11
Page 8
Step 4
With assistance from your adult partner, postion the Left Arm (E) and Right Arm (F) with
Front Seat Board(G) as picture, hold up the Backrest(B) and stand behind the both Arms,
Align the mounting brackets on both sides of the Backrest(B) with those on the hind of Left
Arm (E) and Right Arm (F).
Then slide Backrest(B) downward to make sure it locks into place as pictured
E
F
B
G
B
E
Page 8 OF 11
Page 9
With assistance from your adult partner,hold up the Seat Base(A) on the top of the
assembled parts,put the front side of Seat Base(A) over on the rail of Front Seat Board(G)
as picture.
Then slide the two downward hooks on each side of the Seat Base(A) into the upward
hooks slot on the Left Arm (E) and Right Arm (F),do it one back one and make sure into
the position.
Step 6
Step 5
upward hook slot
A
E
F
C
A
G
A
E
F
G
B
E
A
Page 9 OF 11
Page 10
Step 6
Put the Seat Cushion(C) on the Seat Base(A) and to the right position.
Place the Back Cushion(D) against Backrest(B) and to the right position.
Make sure all parts are connected and securely locked into position
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
D
B
C
Page 10 OF 11
Page 11
Page 11 OF 11
Loading...