Winston Porter W000238005 Assembly Instructions

Label Picture Description QTY

A Table Top 1

B Leg 4

Caution: You must read this before you proceed

Table

1 OF 5

Label Picture Description QTY

①

Bolt Cover 9

②

Bolt M6*20mm 9

③

Washer 9

④

Allen Key

1

Overview

This Table has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Table parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to familiarise yourself with the parts
and steps before assembly.

Before Beginning Assembly:

FRONT FACING

Table Top

Leg (B)

2 OF 5

Repeat Step 1 with the remaining three Legs(B).

Only loosely tighten Bolts.

Step 1

Open the carton and place all the parts onto a clean, non-marring surface.
Attach Leg(B) onto the Table Top(A) using Bolt(②) and Washer(③) with Allen Key(④).

Only loosely tighten Bolts.

Step 2

3 OF 5

Your Table is ready for use.
This Table can only be used on a flat, level surface.

Step 3

Stand the Table right way up. Place the Table on a LEVEL SURFACE to check for wobbles.
If it wobbles, lift the table some 20cm to 30cm high from the ground.
Keep your feet and toes well away from the drop zone.
Drop the table freely and vertically with all four legs, hitting the ground, at the same time.
This Drop Test will help to ensure that all Bolts and gaps reach full alignment status.
Test again for evenness on a LEVEL SURFACE.
If no wobbles are found, slowly and carefully, turn the Table facedown.
Then, proceed to tighten all Bolts in a sequential manner.

When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then towards the next one.
This could cause the frame to warp. If there are still wobbles, loosen the Bolts and
execute the same drop test.
If the Table is not stable, it could lead to damage to the product.

Put the Bolt Covers(①) over all of the Bolts(②).

Step 4

4 OF 5

Questions & Answers about Proposition 65

• What is Proposition 65?

Proposition 65 requires businesses to provide warnings to Californians about significant
exposures to chemicals that cause cancer, birth defects or other reproductive harm. These
chemicals can be in the products that Californians purchase, in their homes or workplaces, or
that are released into the environment. By requiring that this information be provided,
Proposition 65 enables Californians to make informed decisions about their exposures to these
chemicals.
Proposition 65 also prohibits California businesses from knowingly discharging significant
amounts of listed chemicals into sources of drinking water.
Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth
defects or other reproductive harm. This list, which must be updated at least once a year, has
grown to include approximately 900 chemicals since it was first published in 1987.

• What types of chemicals are on the Proposition 65 list?

The list contains a wide range of naturally occurring and synthetic chemicals that include
additives or ingredients in pesticides, common household products, food, drugs, dyes, or
solvents. Listed chemicals may also be used in manufacturing and construction, or they may be
byproducts of chemical processes, such as motor vehicle exhaust.

• What does a warning mean?

If a warning is placed on a product label or posted or distributed at a workplace, a business, or
in rental housing, the business issuing the warning is aware or believes that it is exposing
individuals to one or more listed chemicals.
By law, a warning must be given for listed chemicals unless the exposure is low enough to pose
no significant risk of cancer or is significantly below levels observed to cause birth defects or
other reproductive harm.

• Where can I get more information on Proposition 65?

If you have specific questions on the administration or implementation of Proposition 65, you
can contact OEHHA's Proposition 65 program at [e-mail], or by phone at
[phone].

5 OF 5