Page 1
Bar Stool
IMPORTANT NOTE
.
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
Part List
A.
Seat
1 pc.
E.
Side Stretcher
1 pc.
F.
Side Stretcher
1 pc.
Hardware List
Hex Wrench
1 pc.
Small Wrench
1 pc.
M3.5x40
Wood Screw
6 pcs. (+1 extra)
M6x40
Head Cap Bolt (short)
3 pcs. (+1 extra)
B.
Leg
1 pc.
G.
Front Stretcher
1 pc.
M6x50
Head Cap Bolt
4 pcs. (+1 extra)
M6x70
Head Cap Bolt (long)
4 pcs. (+1 extra)
C.
Leg
1 pc.
D.
Back Frame
1 pc.
Flat Washer
11 pcs. (+1 extra)
Spring Washer
11 pcs. (+1 extra)
Tools required for assembly : Phillips screwdriver
Page 2
Assembly Instructions 2/2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
Wood Screw
STEP 1
Attach Legs (B) and (C) to Seat (A) with
Flat Washers, Spring Washers and
Head Cap Bolts. (See Figure 1)
Tighten olts only half way.all Head Cap B
Attach Front Stretcher (G) to unit with
Wood Screws. (See Figure 2)
Attach Side Stretcher (E) to Leg (B) and
Side Stretcher (F) to Leg (C) with Wood Screws.
(See Figure 2)
Figure 1
Figure 2
Head Cap Bolt
Spring Washer
Flat Washer
G
F
C
E
B
A
Wood Screw
Head Cap Bolt (short)
Spring Washer
Flat Washer
D
STEP 2
Attach Back Frame (D) to unit with Flat Washers,
Spring Washers, Head Cap Bolts (short),
Head Cap Bolts (long) and Wood Screws.
(See Figure 3 and Figure 4)
Tighten all Head Cap Bolts.
Head Cap Bolt (long)
Spring Washer
Flat Washer
Head Cap Bolt (short)
Spring Washer
Flat Washer
Figure 3
Figure 4
Loading...