Winston Porter THRE6630 Installation & Assembly

1 of 5

Congratulations! You have purchased a stylish piece of us.
We strive to provide fine furniture products, built with quality materials and hand

finished details. Please carefully follow the assembly instructions to ensure your
furniture is assembled correctly to provide long lasting enjoyment.

Should you experience any missing or damaged parts, do not return to the store.

Care: Use a soft clean cloth that will not scratch the surface when dusting. Use of
furniture polish is not necessary. Should you choose to use polishes, test in an
inconspicuous area first. Use of solvents of any kind may damage your furniture’s
finish. To clean, simply use a soft clean cloth moistened with lukewarm water, then
buff with a dry soft clean c

loth.

2 of 5

Framed Mirror

Support Plate

Adjustable shelf

1

Knob Ø29*27mm

A

Long Screw Ø4*57mm

D

1pc

1pc

4pcs

2

Round Head Bolt

Ø5/32"*19mm

B

Wall Anchor Ø8*38mm

E

1pc 3pcs

1pc

4pcs

3

Shelf Support Ø6.5mm

C

12pcs

EXTRA HARDWARE LIST

ADDITIONAL TOOLS ( Not Provided)

Note: It is not recommended to use power tools during assembly. You may use power
tools to assist in mounting the safety strap kit to the wall.

Phillips Head Screw Driver

Hold the Support Plate (2) in the desired location of the wall unit. This plate will be about 2-1/2”

3 of 5

lower than the top of the wall unit. Making sure the Support Plate (2) is level, use a pencil to
mark the anchor locations using the Support Plate (2) screw holes as a guide. We recommend
using a leveler to make sure the Support Plate (2) is oriented correctly.

-Drill two 11/32” holes in these marked spots and tap the Wall Anchors (E) into the drilled holes.

Secure the Support Plate (2) to the Wall Anchors (E) with Screws (D). See Image.

-Mount the completed unit onto the Support Plate (2). The back of the unit has a recessed
area that will hook on to the Support Plate (2). Use a pencil to mark the 2nd set of anchor
locations using the holes in the wall unit as a guide. See Image.

-Remove the wall unit and drill two 11/32” holes at the pencil marks, and tap the Wall Anchors
(E)into the holes.

-Remount the wall unit and secure it to the Wall Anchors (E) with Screws (D). See image.

if the door is loosened

Insert Shelf Supports (C) into predrilled holes at desired shelf heights. Insert Adjustable

4 of 5

Shelves (3) into Shelf Supports (C) .

Attach Knob (A) to cabinet door using Round Head Bolt (B) .

Adjust the hinge

or tight .

5 of 5

Our Products are warranted against defects in material and workmanship for a

period of 90 days beginning from the date of sale. Should any parts be missing or
defective, we will replace or repair the parts for a period of 90 days from the date of
purchase.

Should you experience any missing or damaged parts, do not return to the store. Please

contact us.

This warranty gives the purchaser specified legal rights in addition to any rights
which may vary from state to state.
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed
a "limited warranty" which in no way compromises our high standards of Quality and
Workmanship.