Page 1
STEP 1
Attach mirror support (C) to the mirror back (A), then tighten with
screw (1). Make sure the marking line on mirror support is at the same level
as the bottom of mirror.
STEP 1
STEP 2
Place the mirror with support on the top of dresser (B). Then align center as
shown and tighten with PHCB screw (1).
ASSEMBLY INSTRUCTIONS
Component List
A 1Mirror
Hardware List
No QtyDescriptions
1
BCDresser
Mirror Support
1
2
No QtyDescriptions
10PHCB Screw M4 x 32mm
Center mark
A
C
1
C
C
1
ASSEMBLY COMPLETED
ASSEMBLY TIPS :
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast
and easy assembly.
B
REVISION : B
Loading...