Winstars Technology WS WN523 User Manual

Wireless Extender&Router

WS-WN523

Quick Installation Guide(Q.I.G.)

REV.1.0

Introduction：

Wireless Extender&Router is a combined wired/wireless network

The
connection device designed specifically for small business, office, and
home office networking requirements. It complies with the IEEE 802.11n
(Draft 2.0) standard. It adopts MIMO as well as SST technologies. It also
works well with other 11b/g and 11n protocol wireless products. Create
instant WiFi hotspots at any location where you have Internet connection .

Main Features

z Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards
z Supports Router, Client, Bridge, Repeater, AP mode
z QoS function assures the quality of VoIP and multimedia streaming
z Wireless N speed up to 300Mbps and Backward compatible with

802.11b/g products

z Compact and portable, powerful wireless signal as well
z Travel size design, ideal for home or travel use
z Supports WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions

Package Contents

Before you starting to use this router, please check if there’s anything
missing in the package, and contact your dealer of purchase to claim for
missing items:

• 1 x Wireless N Mini Router

• 1 x Quick Installation Guide

• 1 x RJ-45 Networking Cable

Getting Started

Setting up a Wireless Infrastructure Network

For a typical wireless setup at home (as shown above),
Please do the following:

1. You will need broadband Internet access (a ADSL, Cable Modem line
into your home or office).

2. Consult with your ADSL or Cable Modem provider for proper
installation of the modem.

3. Connect the ADSL or Cable modem to the Wireless N Mini Router.
Plug the power plug of the Router in electrical wall socket.

4. Adding computers to the Wireless N Mini Router.

You can reset your Wireless-N Router to default setting by

press the ‘RESET’ button on the back side of the Router.

You can use this solution if you forget your password.

IMPORTANT NOTE

Adding computers to the Wireless N Mini Router Router

1. Log on to the computer.

2. Open Connect to a Network by right-clicking the network icon ( or

) in the notification area.

3. Choose the wireless network
appears, and then click

Connect

“

Wireless-N

.

”

from the list that

4. Type the network security key or passphrase if you are asked to do
so, and then click OK.

You'll see a confirmation message when you are connected to the
network.

5. To confirm that you added the computer, do the following:
Open Network by clicking the

Control Panel

. In the search box, type

Network and Sharing Center, click

.

devices

button , and then clicking

Start

network

, and then, under

View network computers and

You should see icons for the computer you added and for the other
computers and devices that are part of the network.

Note : If you don't see icons in the Network folder, then network discovery
and file sharing might be turned off.

For more information:

http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-to-a-network
http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network
http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

Configuring via Web Browser

Open web browser and type http://192.168.10.253 in the browser's address
box. This number is the default IP address for this device.

The login screen below will appear. Enter the “User Name” and “Password”
and click “OK” to login.

The default User name is “admin” and the Password is “admin”.

Setup Wizard

After a successfully login, you can click the Quick Setup menu to quickly
configure your Router.

Choose the Operation Mode you need,and then click Next.

AP Mode:

Set the wireless parameter.It's recommended that you rename an SSID,
choose a Security Mode and enter a Key.
Click Save&Reboot to reboot the Router and make the settings take effect.

Router Mode:

Set the wireless parameter.It's recommended that you rename an SSID,
choose a Security Mode and enter a Key.

Choose your WAN Connection Type.
If Dynamic IP is selected, the Router gets the IP address automatically
from the DHCP server or the ISP. No configuration should be set and you
can go on with the wireless configuration.
If PPPoE is selected, please enter the User Name and Password giben
by your ISP,These fields are case-sensitive.

Click Save&Reboot to reboot the Router and make the settings take effect.