Winspeed A66 User Manual

Wireless Keyboard
Item No.: SL-640304-BK-XX，("XX" could be letter "A~Z", what stand for keyboard layout; or "XX" could be
"V1~V10", what stand for keyboard version)
FCC ID: 2AEDNA66

1. Overview

Note:

Low battery LED: It’s low battery when the LED is flashing during using, it’s reminding user to change new battery.

2. Features:

1) Operating system: Windows 98/2000/ XP/Vista/7/8

2) Hardware: 1 available USB port

3. Package Contents

1) Keyboard

2) Mouse

3) Mini Receiver

4) User manual
Note: 1xAA battery for mouse
1xAA battery for keyboard

4. Connect

Step 1. Installing the batteries:

 Press and lift the battery cover
 Insert 1xAA batteries into keyboard and mouse
 Close the battery cover

Note: Please insert the battery with the correct polarity.

Step 2. Remove the mini receiver from the keyboard and insert to the USB port

Step 3. Switch on keyboard by setting the on/off switch to ON to activate the connection.

5. Cleaning

* Shut the computer down.
* With a soft cloth to remove any dirt.

6. FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the e quipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.