Winplus Australasia HE161313M, HE161313C Users manual

User Guide

.

Manual

del usuario

VIDEO BABY MONITOR

MONITOR DE VIDEO
PARA BEBÉ

English.....Page 3

En español...Página 16

Contents

Safety 4

Technical Specications 6
Features 6
Parts List 6
Product Overview 7
Installation 9
Operation 10
Questions & Answers 12
Maintenance & Disposal 13
Warranty Terms 14
Warranty Card 16

Video Baby Monitor

.

Safety

FCC Information
FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This manual contains important information about this product’s
operation. If you are installing this product for others, leave this manual
or a copy with the end user.

When using your equipment, always follow basic safety precautions to reduce
the risk of re, electric shock and injury to persons, including the following:

Battery Warning:
Only use the original rechargeable battery provided

• Do not short-circuit supply terminals

• Remove the battery when product is stored for long periods of time

• Only use the provided power adaptor to charge the battery

• Keep battery away from children

• Keep battery in a cool dry place

AFTER SALES SUPPORT

USA

4

800-372-5715

[e-mail]

Video Baby Monitor

.

• Strangulation Hazard: Children have been STRANGLED with cords. Keep all cords out

of reach of children (more than 3 feet (0.9m) and away from the child’s bed). Never use
extension cords with power adaptors. Only use the power adaptors provided

• This equipment is NOT waterproof. DO NOT expose it to rain or moisture.

• DO NOT immerse any part of the product in water. Do not use this product near water,

e.g., near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.

• To avoid any risk of electric shock from lightning, avoid handling any electronic devices

(except battery powered ones) during an electrical storm.

• Never dispose of any batteries in a re: they may explode. Check with local codes for

possible special disposal instructions.

• Never tug or pull on any power cord: be sure to leave some slack in the cord when placing

your equipment, and always use the plug to unplug the cord from the wall outlet.

• Never leave power cords where they can become crushed, cut, or frayed; when running

power cords, avoid letting them rub against any sharp edges or lie across any high trac

areas where people might trip over them.

• Do not use the device if the adaptor cords or plugs have been damaged, the unit has been

exposed to liquids, or the unit has been dropped or is damaged.

• Do not drop, puncture or disassemble any part of the equipment. There are no user-

serviceable parts inside.

• Do not expose the equipment to high temperatures, and avoid leaving the equipment in

direct sunlight for more than a few minutes. Heat can damage the case or electrical parts.

• Do not place heavy items on top of the equipment or expose the equipment to heavy

pressure.

• Remove the power adaptor during long periods between usages.

• Rechargeable battery is only to be charged under adult supervision.

• The supply terminals are not to be short circuited.

• Do not leave monitor or battery near a heat source such as re, heater or in direct sunlight.

• When a power adaptor is plugged into an electrical outlet, do not touch the exposed end.

• Test monitor before rst use, periodically, and when changing location of the camera.

• Do not use monitor near water (such as bathtub, sink, etc).

• Make sure there is proper ventilation around all monitor components. Do not place on

sofas, cushions, beds, etc. where ventilation may be blocked.

• Do not immerse monitor or battery in water.

• Keep battery in a cool dry place.

• Only use the provided power adaptor to recharge the battery.

• This product is not a toy. Do not allow children to play with it.

Safety

WARNING: This product cannot replace responsible adult supervision.

WARNING: Failure to follow the instructions in this operating manual will void the warranty.

Balco Lifestyle assumes no liability for damages to property or injury to persons caused by improper
handling or failure to comply with these safety instructions.

AFTER SALES SUPPORT

USA

800-372-5715

[e-mail]

5

Video Baby Monitor

.

• 1x Little Journey PTZ (Pan Tilt and Zoom) Camera

• 1x Little Journey 5” LCD Monitor

• 2 x Power Adaptors

Technical Specications

Camera

• Camera Angle: Lens viewing angle 55 degrees

- Vertical rotation: 70 degrees

- Horizontal rotation: 270 degrees

• CMOS Sensors: 640 x 480 with Auto White Balance

• LEDs: 8 x 940nm IR LEDs

• Frequency Range: 2400MHz - 2483.5MHz RF

Monitor

• Battery: 1440mAh rechargeable lithium-ion battery

- VOX (Voice Operated Mode) on: Monitor Screen is OFF - Battery

would last approximately 10 hours

- VOX (Voice Operated Mode) off: Monitor Screen is ON - Battery

would last approximately 6 hours

• Monitor size: 5” Colour LCD Flat Screen

Parts List

Power Supply

6

• Model: ZD5C050100USW

• Input:100-240V~50/60Hz 0.2A Output:5V 1000mA

Features

• 100% digital technology for privacy and security

• Close-up views on monitor with a range up to 850-feet (283 yards)

• 5 Inch Color LCD Flat Screen video with automatic black and white

night vision

• PTZ Camera: Pan Tilt and Zoom features for optimal positioning for

monitoring baby and surrounding.

• Can be mounted on a tabletop or wall mounted

• PTZ Camera: lens viewing angle of 55 degrees with vertical rotation of

70 degrees and horizontal rotation of 270 degrees

• Add up to 4 cameras (total) to monitor multiple children or rooms, with

video and audio scan between rooms

• Sound activated LED lights

• Power-saving one-touch video

• VOX (Voice Operated Mode) ON/OFF

• Low battery and out of range indicators

AFTER SALES SUPPORT

USA

800-372-5715

[e-mail]

Video Baby Monitor

.

Product Overview

1 2 3

8

7

4

6

5

VOX

1. ON/OFF LED:

- Green LED: Monitor is on

- Orange LED: Monitor is charging

- Red LED Flashes: Low Battery

2. VOX ON/OFF Indicator: Green LED indicates Voice Operated Mode is

activated

3. Sound level indicator: Sound indictor from the camera. The louder the

volume, the more LEDs are lit on the indicator

4. Move Camera/Navigation Buttons

5. VOX Button: Press to turn on/off Voice Operated Mode

- When VOX mode is activated, LCD screen and audio will be

disabled for battery saving mode. LCD Screen will be switch on
when noise exceed volume level set from Menu settings

6. Select Button: Press to select menu options

7. Menu: Press for Menu Popup

8. Zoom Button: Press once to zoom in. Press again to zoom out

9. Volume up/down button

10. ON/OFF Button

11. Micro USB Port

12. Antenna

13. Battery Cover

14. Stand

12

9

10

13

11

14

AFTER SALES SUPPORT

USA

800-372-5715

[e-mail]

7

Video Baby Monitor

.

1

2

1. Antenna

2. Temperature Sensor

Product Overview

AFTER SALES SUPPORT

USA

8

800-372-5715

[e-mail]

Video Baby Monitor

.

Installation

Test Before Installation

Before installing the Baby Monitor in its nal location, check the position and
reception of the camera. First charge the battery for 4-5 hours. Next, one adult
should view the monitor. The other adult should position the camera in the
nursery. Place an object in the crib to simulate the baby’s position. If reception
is not clear, slightly reposition the camera to achieve a clear signal.

Installation

1. Installing the PTZ Camera
a. Connect the Power Adaptor to the DC port at the

back of the camera

b. Connect the other end of the power adaptor to

a main power outlet. The LED on the back of the
temperature sensor will illuminate, indicating camera
is on

NOTE: Ensure the PTZ Camera is placed on a at surface such as a desk or

shelf, out of reach of children

IMPORTANT: Do not place the PTZ Camera or any cords within 3 feet (0.9M)
range of the child’s bed

2. Charging the Monitor
a. Connect the micro USB plug Adaptor to the micro

USB port located on the side of the Baby Monitor

b. Connect the other end of the power adaptor to a

main power outlet. The bars on the battery icon
located on the top right corner of the screen will
increase, indicating your monitor is now charging

c. Once the battery is fully charged, unplug the

charging cable from the monitor and remove the adaptor from the
power outlet

NOTE: It is recommended to charge the Baby Monitor for at least 3 hours prior

to rst use

IMPORTANT: Only charge the Baby Monitor battery when the battery life
indicator is low. Continuously recharging your battery or leaving the power
adaptor plugged into the Baby Monitor, can decrease the life of the monitor
battery

AFTER SALES SUPPORT

USA

800-372-5715

[e-mail]

9

Video Baby Monitor

.

Operation

1. Pairing the Camera to the Monitor
a. Press and hold the power button located on the left side of the monitor

for 3 seconds to turn on the monitor. Your camera will automatically
connect to your monitor as Camera 1 by default.

NOTE: If the camera is not connected to the monitor, press and hold the pairing
button on the base of the camera for 5 seconds to pair

2. Disconnecting the Camera
a. Press and hold the pairing button on

the base of the camera for 5 seconds
to disconnect the device. Camera
disconnected symbol will appear on
your LCD Screen, indicating device is
disconnected.

Menu Settings

NOTE: Your most recent selection is kept in memory and will be highlighted

when navigating the menu in the future

3. Brightness Settings
a. Press and navigate to using buttons
b. Press to adjust to desired LCD Screen brightness
c. Press to select and save settings
d. Press to exit Menu setup

4. Room Temperature Settings

Set your desired MIN and MAX room temperature settings. Alarm will sound
if the temperature exceeds your MAX temperature settings, or is below your
MIN temperature settings

a. Press and navigate to using buttons
b. Press to

HIGH

and press to change to your desired MAX Room

Temperature using the buttons

c. Press to return and repeat the step above and navigate to

LOW

your MIN Room Temperature as well as other temperature settings

°C

- Temperature displayed in Celsius

°F

- Temperature displayed in Fahrenheit

ON

- Activate Room Temperature Alarm

NOTE: When Room temperature is activated, temperature icon and degrees will
display at the top of the LCD Screen

OFF

- Deactivate Room Temperature Alarm

- Room Temperature Calibration: Set your current Room Temperature

AFTER SALES SUPPORT

USA

10

800-372-5715

[e-mail]

to set