Specification
Niou
LM030008
LED LINKABLE SHOPLIGHT
Specification
File status：
[
] Draft
[√ ] Published
[ ] Pending
File name：
Product specification
Version：
V1.0
Editor：
Finished
date：
Version
Editor
Participator
Valid from
Remark
V1.0
Henry Ho
2019-10-14
Specification
CS-CRD02-XX1
HD021VCR
colasmart
CS3921
-20℃–60
℃
0 Amendment
1 Feature
LM030008
microwave module, which applies
self-R&D microwave chip, can
effectively sense human and entity motion
Light sensor is available when correspondent component
is extra-connected
IR remote is available when correspondent component is
extra-connected ,and microwave motion sensor
distance,hold time,lux threshold etc can be adjusted by
IR remote
Plate-antenna applied for the sake of max long-distance
detection purpose
RGB background mode available
Working temperature be -20 deg C to +70 deg C
HD021VCR
2 Application
Lighting
Security
Smart home
3 Specification
Working voltage
7.5-12VDC
Working current
<30mA
Stand-by power
<0.5W
Working temperature
-20 deg C to +70 deg C
Frequency Range
5753-5853MHz
Microwave power
<0.3W
Detection range
Max.ø14m(ceiling mounted)
Mounting height
Max.4.5m(ceiling mounted)
Sense distance
Very near/Near/Medium/Far
Hold time
OFF/30s/10min/30min
Specification
4 Drawing
IR Receiver
Red : VCC
Black :GND
White :PWM
Mechanical structure(mm)
32.5mm
32.5mm
Specification
Brightness level
Level
1
st
level
2
nd
level
3
th
level
4
th
level
5
th
level
6
th
level
7
th
level
8
th
level
Pwm %
10%
20%
30%
40%
50%
60%
70%
80%
Level
9
th
level
10
th
level
Min
Max
Pwm %
90%
100%
10%
100%
5.6
Hold time
Hold time level
1min
5min
10min
30min
Time to dim to stand-by
brightness from current
brightness(half of current
brightness)
30s 4min
9min
29min
Time to dim to OFF from
stand-by brightness(half
of current brightness)
30s 1min
1min
1min
5.7
Sense distance
Distance
level
Very near
Near
Medium
Far
Distance
range
1 - 2
2 - 3.5
3.5 - 5
5 - 7
6 Remark
Sense range will be different according to different install height and sense angle
Application environment, entity motion velocity etc will effect module sense range ,so above sense range is
only for your reference based on ideal circumstance
Actual lux threshold is related to your light case material, our value is this specification is only for reference
Specification
FCC Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Increase the separation between the equipment and receiver.
-- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product
“Contains Transmitter module FCC ID: WUI-LM030008”
The modular must be installed in the host that assign by
Company name: Winplus Co., Ltd.
Product/PMN: LED Shop Light (Linkable) with Motion Sensor Remote
Model no./HVIN: LM030008-84
if other host types used would need further evaluation and possible C2PC if they are not significantly similar to the
one tested.
IC Information
-English:
1. This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment.
-French:
Leprésent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio
Exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement."
Cet appareil est conforme aux limitesd'exposition de rayonnement RF ISEDC établiespour un environnement non
contrôlé.
Pour satisfaire la ISED extérieur étiquetage, le texte suivant doit être placéàl’extérieur du produit final “Contains
émetteur module IC:7297A-LM030008”.
The modular must be installed in the host that assign by
Le modulaire doit être installé dans l'hôte assigné par
Nom de la compagnie: Winplus Co., Ltd.
Produit/PMN: LED Shop Light (Linkable) with Motion Sensor Remote
Modèle no./HVIN: LM030008-84
if other host types used would need further evaluation and possible C2PC if they are not significantly similar to the
one tested.
si d'autres types d'hôtes utilisés nécessiteraient une évaluation plus poussée et un C2PC possible s'ils ne sont pas
significativement similaires à celui testé
Loading...