Winning Home WH100044 Specifications Sheet

product specifications

HomeWorks QS Processor

The QS processor provides control and

communication to HomeWorks system
components.

The Ethernet links allow communication to the

HomeWorksQS software, integration with third
party systems and communication between multiple
processors. HomeWorksQS processors may be
connected using either standard networking or
using ad-hoc networking. All processors on a
project must be connected to a single network.
The HomeWorksQS software and all integration
equipment must be connected to the same network
as the processors.

The processor is powered from the QSPS-DH-1-75

or QSPS-DH-1-60 power supply. Refer to the
HomeWorksQS software to determine link power
requirements.

The QS processor can be installed in a HQ-LV21,

L-LV21, L-LV14, or PNL-8 enclosure.

369376e

08.05.19

Processor Capabilities

Each QS processor has 2 links that can be

individually configured as one of four types:

• HomeWorks Power Panels
16 interfaces / 256 zones

• HomeWorksQS Wired Device Link
99 devices / 512 zones

• HomeWorks Clear Connect
99 devices / 100 zones

• HomeWorks Wired Dimmers
4 interfaces / 192 zones

Model Number

HQP6-2 HomeWorksQS Processor

Customer Assistance:

1www.lutron.com/support

1.844.LUTRON1 (U.S.A. / Canada)
+44.(0)20.7680.4481 (Europe)

product specifications

369376e

08.05.19

HomeWorks QS Processor

Specifications

Model Number HQP6-2

Power Processor (P): 24–36 V- 250 mA

Links (L1 / L2): 24–36 V- 2 A per link

Typical Power
Consumption

Regulatory Approvals UL, cUL, CE, NOM

Environment Indoor use only. 32°F to 104°F (0°C to 40°C), 0%to90%humidity,

Heat Generated 17 BTU/hr — typical

Cooling Method Passive Cooling

Power Failure Memory System data stored in non-volatile memory. Timeclock retention for 10years

Internal Timeclock ±1 minute per year

Miswire Protection All terminal block inputs are over-voltage and miswire protected against wire

Low-Voltage Link
Wire Type

Low-Voltage Power
Wire Type

Communications Ethernet, RS485 (QS, RF, Power Panel)

Link Capacities HomeWorks Power Panels 16 interfaces/256 zones

ESD Protection Meets or exceeds the IEC 61000-4-2 standard

Surge Protection Meets or exceeds ANSI/IEEE C62.41 standard

Mounting Mounts in HQ-LV21, L-LV14, L-LV21, or PNL-8 enclosure

Dimensions With terminal blocks (as shown): 4.27 in (108 mm) x 6.0 in (152 mm)

Connections Two 5-pin removable terminal blocks* for Links 1 and 2.

Warranty www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf

5 W; 8 Power Draw Units (PDUs)
Test conditions: Two Ethernet links connected, both device links in use

non-condensing

(24 BTU/hr with 2 links at 2 A each output)

reversals and shorts.

Two pair — one pair 18 AWG (0.75mm2), one pair 18 to 22 AWG
(0.34 to 0.75mm2) twisted shielded — IEC PELV / NEC® Class 2 cable

18 AWG (0.75mm2)

HomeWorksQS Wired Device Link 99 devices/512 zones
HomeWorksRF Link 99 devices/100 zones
HomeWorks Wired Dimmers 4 interfaces/192 zones

Without terminal blocks: 4.27 in (108 mm) x 5.26 in (134 mm)

One 5-pin removable terminal block* for Power Input.
Two RJ45 standard Ethernet connections.
*Each terminal will accept up to two 18 AWG (0.75mm2) wires.

www.lutron.com/TechnicalDocumentLibrary/Intl_Warranty.pdf

Customer Assistance:

2www.lutron.com/support

1.844.LUTRON1 (U.S.A. / Canada)
+44.(0)20.7680.4481 (Europe)

product specifications

369376e

HomeWorks QS Processor

Dimensions

Dimensions shown as: in (mm)

Front View Side View

4.27 (108)

5.26 (134)

08.05.19

6.0 (152)

1.06

(26.9)

Customer Assistance:

3www.lutron.com/support

1.844.LUTRON1 (U.S.A. / Canada)
+44.(0)20.7680.4481 (Europe)