Winning Home WH100044 Specifications Sheet
Wireless Remote and Mounting Accessories
1
Pico 4-Button Wireless Remote
The Pico wireless remote is a flexible and easy to use
device that allows the user to control Lutron wireless
load-control devices from anywhere in the space.
This battery-operated control requires no external
power or communication wiring.
Features
• Provides control for the following:
– Energi Savr Node systems programmed with
handheld App, through the use of a QS sensor
module (QSM)
– Vive systems, including:
· Maestro Wireless controls
· PowPak relay module, CCO module,
and 0–10 V(EcoSystem module not available)
– GRAFIK Eye QS wireless systems
– HomeWorks QS wireless systems
– RadioRA 2 systems
– RA2 Select systems
– Serena RF remote control shades
– Sivoia QS wireless systems
– Caséta Wireless controls
– Quantum systems, through the use of a QS
sensor module (QSM)
– myRoom prime and plus systems
• Custom engraving options.
• Control available in a variety of button marking
options.
• Control available in Gloss and Satin Colors finishes.
• Easy reconfiguration for use as:
– Handheld remote
– Wall-mount control (with or without faceplate;
faceplate adapter kit sold separately)
– Car visor control (car visor clip sold separately)
– Table-top control (table-top pedestal sold
separately)
Control SpecificationPico
369847j 1 09.19.2018
Pico 4-Button Wireless Remote
1
• Utilizes Lutron reliable Clear Connect RFtechnology.
• Battery-powered. Requires no wiring.
2
• 10 year battery life
(one CR2032 battery included).
• Can provide control of shades, drapes, or lighting
devices within a range of 30 ft (9 m) through walls
and 60 ft (18m) line-of-sight.
1
Lights zone control printing shown.
2
Based on a 1 year shelf life, an average of 10 button presses per day, and an ambient temperature of 86 °F (30 °C). Actual life may vary based on usage and environmental
conditions.
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Wireless Remote and Mounting Accessories
2
Specifications
Regulatory Approvals
• Lutron Quality Systems registered toISO9001.
• FCC Certified (U.S.A.)
• IC Certified (Canada)
• COFETEL Certified (Mexico)
• SUTEL Certified (Costa Rica)
• Anatel Certified (Brazil)
Power
• Operating Voltage 3 V-
• (1) CR2032 battery (included)
System Communication and Capacity
• Communicates using Radio Frequency (RF) at
431MHz to 437MHz.
• Thousands of system addresses prevent interference
between systems.
• Can be assigned to control shades, drapes, or
lighting devices within a range of 30ft (9m) through
walls and 60ft (18m) line-of-sight.
Control SpecificationPico
369847j 2 09.19.2018
Environment
• Ambient operating temperature:
32°F to 140°F (0°C to 60°C)
• Maximum 90% non-condensing relative humidity
• Indoor use only
Warranty
• 1 Year Limited Warranty. For additional Warranty
information, please visit
www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
Mounting Considerations
• All RF devices should be mounted on nonmetallic
surfaces to ensure proper performance.
• If you wish to mount your Pico wireless remote to a
metallic surface, the PICO-MOUNT-1-XX-CPN6774
will be required in order to maintain proper RF
performance. For availability, please contact your
local Lutron sales office.
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Dimensions
3
Measurements shown as: in (mm)
Front view
2.6 (66)
Wireless Remote and Mounting Accessories
Side view
Control SpecificationPico
369847j 3 09.19.2018
1.2 8 (3 3 )
0.34 (9)
SPECIFICATION SUBMITTAL Page
Job Name:
Model Numbers:
Job Number:
Operation
4
Indicator LED
Flashes to indicate a
button press or when unit
is in programming mode.
Lights Models: L01, EL1
Wireless Remote and Mounting Accessories
Zone Controls
Shades Models: S01, ES1
Control SpecificationPico
369847j 4 09.19.2018
ON Button
Lights brighten to full intensity.
Raise Button
Lights increase in intensity.
Lower Button
Lights decrease in intensity.
OFF Button
Lights dim to off.
OPEN Button
Shades open fully.
Raise Button
Shades open gradually.
Lower Button
Shades close gradually.
CLOSE Button
Shades close fully.
Zone Controls (-S01, -ES1) Shade Functionality
System Type Serena Wireless Triathlon Wireless Sivoia QS Wireless Sivoia QS Wired
Standalon e Pic o Yes Yes Yes Yes
Caséta Smart Bridge Yes — — —
Caséta Smart Bridge Pro Yes Yes Yes —
RadioRA 2 — Yes Yes —
RA2 Select — Yes Yes —
HomeWorks QS — Yes
1
Quantum systems — — — Yes
myRoom prime Yes Yes Yes Yes
myRoom plus — Yes
1
Either a QS sensor module or a hybrid repeater is required.
2
QS sensor module required.
1
Yes
Yes
1
1
Yes
Yes
1
1
2
2
1
(continued on next page…)
SPECIFICATION SUBMITTAL Page
Job Name:
Model Numbers:
Job Number:
Loading...