Page 1
product specifications
®
Lutron Connect Bridge
The Lutron Connect Bridge creates a link between a
RadioRA 2 or HomeWorks QS system and the Lutron
cloud, enabling remote access to your system.
Features
• Works with the Lutron Connect app
(Android® and iOS®)
• Provides remote access for control and monitoring of
system via Lutron Connect app
• Timeclock syncing to always ensure accurate system
time
• Compatible with Apple HomeKit technology for up to
99 zones
2
– Uses Siri voice control to adjust lights and shades
• Sonos® endorsed integration
• Integrates with Amazon® Alexa®-enabled devices
• Supports geofencing from the Lutron Connect App
1,2
3
4
05.31.19369975e
Lutron Connect Bridge
Models Available
• CONNECT-BDG2-1: 5 V- 300 mA
(North America with Power Supply T-5DC-USB-WH)
• CONNECT-BDG2-2: 5 V- 300 mA
(Without Power Supply)
• CONNECT-BDG2-3: 5 V- 300 mA
(With Power Supply Kit T-5V-PS-KIT-BL - includes
4 plug adapters for United Kingdom, Europe, Australia,
and China)
1
The Lutron Connect Bridge is required when using the Lutron Connect app.
The Lutron Connect App is compatible with iOS devices version 9.0 or later
and Android devices 4.1 (Jellybean) or later.
2
To control this HomeKit-enabled accessory, iOS 9.0 or later is
recommended. Communication between iPhone, iPad, or iP o d To u c h and
HomeKit-enabled Connect Bridge is secured by HomeKit technology.
Controlling this HomeKit-enabled accessory automatically and away from
home requires an Apple TV with tvOS 10.0 or later or an iPad with iOS 10.0
or later set up as a home hub.
3
A working internet connection, Lutron Connect Bridge, Lutron Connect App
2.0 or newer and Sonos app are required.
4
A working internet connection, Lutron Connect Bridge, and Lutron Connect
App 3.0 or newer are required.
Customer Assistance:
1.844.LUTRON1 (U.S.A./Canada)
1
+44.(0)20.7680.4481 (Europe)www.lutron.com/support
Page 2
product specifications
®
Lutron Connect Bridge
Specifications
Model Numbers CONNECT-BDG2-1, CONNECT-BDG2-2, CONNECT-BDG2-3
Power 5 V- 300 mA
Power Supply (CONNECT-BDG2-1): 5 V- 550 mA; cable length 6 ft (1.83m)
Power Supply Kit (CONNECT-BDG2-3): 5 V- 1000 mA; cable length 6 ft (1.83m)
Typical Power
Consumption
1.3 W
Test conditions: LED on, Ethernet cable plugged in, powered by the 5 V- power supply
05.31.19369975e
Regulatory
Approvals
Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C),
Communications Internet connection is required for initial setup, to maintain system date / time, for remote
Protection Tested to withstand electrostatic discharge without damage or memory loss in accordance
Power Failure Power failure memory: should power be interrupted, the Lutron Connect Bridge will return
Connections Ethernet: 3 ft (0.92 m) cable included for internet and Lutron Connect Bridge connection
Warranty www.lutron.com/TechnicalDocumentLibrary/warranty.pdf
cULus® listed; certified for IEC / EN compliance; CE marked; FCC / Industry Canada Compliant.
CONNECT-BDG2-1 Power Supply (T-5DC-USB-WH): cULus® listed; NOM certified.
CONNECT-BDG2-3 Power Supply Kit (T-5V-PS-KIT-BL): cULus® listed; CE marked;
CCC certified.
0% to 90% non-condensing humidity. Indoor use only.
access from the Lutron Connect app, and to receive periodic firmware updates. Network
connection to RadioRA 2 main repeater or HomeWorks QS processor is required.
Not a wireless device.
with IEC 61000-4-2. Tested to withstand surge voltages without damage or loss of
operation in accordance with IEEE C62.41-1991.
to its previous state and reconnect to the Lutron system and cloud services when power is
restored.
via RadioRA 2 main repeater or HomeWorks QS processor. Micro USB cable (power only).
www.lutron.com/TechnicalDocumentLibrary/Intl_warranty.pdf
Customer Assistance:
1.844.LUTRON1 (U.S.A./Canada)
2
+44.(0)20.7680.4481 (Europe)www.lutron.com/support
Page 3
Lutron Connect Bridge
®
Dimensions
Measurements shown as: in (mm)
Top View
product specifications
05.31.19369975e
2.75
(69.9)
2.75
(69.9)
Front View
Status LED Bar
1.19
(30.2)
2.75
(69.9)
Customer Assistance:
1.844.LUTRON1 (U.S.A./Canada)
3
+44.(0)20.7680.4481 (Europe)www.lutron.com/support
Page 4
Lutron Connect Bridge
®
Setup
Wired
RF
Communication
Repeater Status
1
3
4
2
M
Power
Repeater Link
COM
9 V
1
N / C
MUX
MUX
234
AddTest
USB
Integrate
Program / Integrate
RS232
Ethernet
Main Repeater
product specifications
05.31.19369975e
Connections
RadioRA 2 Main Repeater
Power
Supply**
RadioRA 2 Main Repeater
USB
Main Repeater
Repeater Status
1
M
Communication
RF
Setup
Power
Repeater Link
N / C
MUX
MUX
COM
9 V
234
HomeWorks® QS Processor
1
Lutron Connect Bridge*
2
4
3
Wired
AddTest
Integrate
Program / Integrate
Ethernet
RS232
Ethernet
Connection
Lutron Connect Bridge*
Lutron
Connect
app
Ethernet
Connection
Wireless Router
(not sold by Lutron)
Lutron
Connect
app
Power
Supply**
24VInput
HomeWorks
QS Processor
Ethernet
Ethernet
Connection
Connection
Wireless Router
(not sold by Lutron)
* The Lutron Connect Bridge must be on the same subnet as the RadioRA 2 Main Repeater or the HomeWorks QS Processor.
** Power supply included with CONNECT-BDG2-1 and CONNECT-BDG2-3.
)Lutron, Lutron, HomeWorks, RadioRA , Lutron Connect, and RadioRA 2 are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or
other countries.
Apple, Apple T V, iPad, iPod touch, iPhone, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries.
HomeKit and tvOS are trade marks of Apple Inc.
iOS is a registered tr Lutron Connect Bridge SPEC (369975) ademark of Cisco in the U.S. and other countrie s and is used under license.
Android is a trademark of Google Inc.
Sonos is a registered trademark of Sonos, Inc.
Amazon and Alexa are registered trademarks of Amazon.com
Customer Assistance:
1.844.LUTRON1 (U.S.A./Canada)
4
+44.(0)20.7680.4481 (Europe)www.lutron.com/support
Loading...