Winning Home WH100035 Installation Guide
OnWall Speaker
- Product Info & Warranty - Page 1
Unpacking / Contents
Speaker
(Model Varies)
Template
Grill
Specifications
Applicable Models
OnWall MiniSat 3.0
OnWall Mini LCR 3.0
OnWall Mini LCR 3.SE
OnWall Mini LCR 1.0
OnWall Mini LCR 1.0SE
OnWall Mini LCR 2.0
OnWall Mini LCR 2.0SE
OnWall Bronze LCR
** 2 pi Frequency Response specifications are measured with wall or other boundary reinforcement nearby. If soundbar is mounted more than 3 inches from a wall or other surface, increase
subcrossover frequency 10 Hz.
Additional Info
Triad's EasyMount wall bracket, included with each speaker, is quick & easy to install, adds no depth, and allows up to .5 inch (12.7mm) horizontal and vertical adjustments for
leveling or aligning.
Dimensions
Inches / cm
44x6x2.8 / 111.8x15.2x7.3
54x6x4; 137.2x15.2x10.2
54x6x4; 137.2x15.2x10.2
21-1/2x6x4; 54.6x15.2x10.2
21-1/2x6x4; 54.6x15.2x10.2
50x6x4; 127.0x15.2x10.2
50x6x4; 127.0x15.2x10.2
10x28x4; 25.4x71.2x10.2
Frequency Response
+/-3dB, 2pi**
90 Hz - 20 kHz
90 Hz - 20 kHz
90 Hz - 20 kHz
90 Hz - 20 kHz
90 Hz - 20 kHz
90 Hz - 20 kHz
90 Hz - 20 kHz
80 Hz - 20 kHz
Sensitivity
2.83v, 1m
86 dB
87.5 dB
87.5 dB
87.5 dB
87.5 dB
87.5 dB
87.5 dB
89 dB
Rec Amp Pwr
Per Channel
75 - 125 Watts
25 - 150 Watts
25 - 150 Watts
25 - 150 Watts
25 - 150 Watts
25 - 150 Watts
25 - 150 Watts
50 - 200 Watts
Rec Sub Xover /
> 3” from wall**
100 / 110 Hz**
100 / 110 Hz**
100 / 110 Hz**
100 / 110 Hz**
100 / 110 Hz**
100 / 110 Hz**
100 / 110 Hz**
90 / 100 Hz**
Nom
inal
Impedance
8 ohms
4 ohms
4 ohms
4 ohms
4 ohms
4 ohms
4 ohms
4 ohms
EZ Bracket
Post length
2 inch
3 inch
3 inch
3 inch
3 inch
3 inch
3 inch
3 inch
Weight lbs/kg
15.2 / 6.9
20.0 / 9.0
22.0 / 9.9
9.0 / 4.1
9.9 / 4.4
14.5 / 6.6
15.8 / 7.2
16.5 / 7.5
Anchor
Key
* For safety, superstretched models longer than 66 inches
(1676.4mm) include 4 sets of EasyMount Brackets &
Hardware. If your speaker includes 4 sets, use them
all as per instructions on page 2.
x1
EasyMount Bracket and Hardware
(8 anchors & 1 key, 8 screws,
2 mounting posts, and 2 knobs & 2 washers).
x2* x2*
North American Limited Warranty
Triad speakers are warranted to be free from defects in manufacturing and workmanship (10) years when operated under normal conditions. Should any such defects occur within
the warranty period call Triad Service at 1-877-264-6315 for an RA (Return Authorization) number. Return the product in intact factory packaging with RA number clearly visible on
outside of box and proof & date of purchase inside to:
Triad Speakers Inc., 15835 NE Cameron Blvd., Portland, Oregon 97230 USA
Triad is not responsible for any shipping damage coming in to Triad. If you do not have intact factory packaging, contact your dealer or Triad Service for purchase. At our discretion
we will repair or replace the product and return it free of charge. International customers should contact their dealer for service. This limited warranty is extended only to Triad
products and is expressly in lieu of all other warranties expressed or implied.
For Mounting with other manufacturers' brackets (e.g. Chief) that use 1/4-20 inserts:
OnWall MiniSat 3.0 has two 1/4-20 inserts on its back for use with other manufacturers' speaker brackets.
OnWall Bronze LCR, OnWall Mini LCR 1.0. 2.0, 3.0 & OnWall Mini LCR 1.0. 2.0, 3.0SE do not have 1/4-20 inserts on their backs. Instead the backs of the EZ Mount Posts are
tapped for 1/4-20 bolts. Simply attach the EZ Brackets to the enclosure as shown in Drawings D on Page 2, but do not attach them to the wall. Screw the 1-4-20 bolts into the backs
of the posts.
TriadSpeakers.com • Sales: 1800-666-6316
Triad OnWall Products w/ EasyMount Bracket - Quick Start Guide
2014.7.23
OnWall Speaker - Installation Instructions - Page 2
OnWall speakers
stretched larger
than 66” require
4 EZ Mounts
Horizontal Installation
A
Level & pin template to wall. Outline
wire hole and screw holes for 2 mounting
posts - or 4 with streched sound-bars longer
than 66"/1676.4 mm. Always orient posts
vertically.
Off Stud
On Stud
5/16"; 8mm
B
Cut wire hole. Install anchors if there are no
studs; once anchors are in the drywall, pop them
open with the included key. Then screw mounting
posts to wall using 4 anchors & screws per post.
Mounting posts should always be mounted
vertically (portrait) for strength.
C
Pull speaker wires through wire hole;
attach to binding posts or push connectors.
Be sure to preserve correct polarity
(red to red) with amp and to avoid stray
strands shorting between binding posts.
D
Mount speaker on posts; loosely
tighten knobs. Level or align +/- 1/4”
(6.35mm), then tighten.
E
Attach grill at one end; seat
edges along both sides; attach
other end. Snug all around.
Vertical Installation
Off Stud
On Stud
5/16"; 8mm
Triad OnWall Products w/ EasyMount Bracket - Quick Start Guide
2014.7.23
Loading...