Winning Home WH100034, WH100036 Quick Guide

System Remote Control SR-260

User Guide

Use the SR-260 to control devices throughout your Control4 home automation system.

• Navigate system menus and access media on a TV or other display using the on-screen Navigator (home automation menu).

• Navigate system menus and access media using the remote’s List Navigator (text-based home automation menu).

Features

• Two-way communication with your Control4 system.

• Backlit display with a text-based List Navigator.

• 50 buttons total, including quick access buttons, transport control buttons, and a full alphanumeric keypad.

• All buttons are programmable.

• Wakes from sleep mode when picked up or moved (if enabled).

• Ambient light sensor automatically changes the keypad brightness, depending on the light in the room.

• Recharging Station available.

SR-260 buttons

SR-260 SR-260-I

Quick access buttons

Use the remote’s WATCH and LISTEN buttons to quickly select from all playback devices in the room or to select the most recently used device (depending on how the installer conﬁgured your system). These buttons can be conﬁgured by your Control4 Dealer.

See the Control4 System Quick Start Guide to learn how to navigate through the system menu and discover all of the cool features and functions of the Navigators.

Programmable buttons

All buttons on the remote are programmable, but the buttons listed below are the most commonly programmed. If these buttons have been programmed by your installer, note their functions here:

______________________________________________

Control4 button—Displays

Control4 menu on TV (if enabled)

ROOM OFF

Display—Screen that displays List

Navigator

WATC H —Displays video

sources or plays most recently watched source

LISTEN

or plays most recently played source

LIST —Displays the system

menu (List Navigator) on the remote’s display screen

Programmable buttons—Functions

vary (installer programs)

GUIDE —Displays TV listings

▲PAGE —Scrolls pages up PAGE ▼ —Scrolls pages down PREV —Returns to previous

channel or screen

VOL —Controls device volume

SELECT

buttons—Moves through menus

and selects menu items

—Turns room o

—Displays audio sources

and directional

CH+– —Changes TV channels

K L

—Toggles device sound

MUTE

—Shows program

INFO

information MENU —Accesses device features and settings CNCL —Sends “Cancel” or “Exit” command

Playback control buttons

Rewinds or fast forwards

Skips back or forward

Plays the current AV source Starts recording Stops record or playback

Pauses

DVR Controls the DVR Programmable buttons—Functions

vary (installer programs) Alphanumeric buttons—Directly

enters channel numbers or text descriptions

Special characters—Alphanumeric buttons that can also be programmed to work directly with a device

Install and maintain batteries

To install the batteries:

1 Install the four AA alkaline batteries (included) into the

back of the remote according to the diagram in the battery compartment (with the + terminals pointing toward the bottom of the remote).

Important: The use of rechargeable AA batteries is not supported. Using rechargeable AA batteries may result in inaccurate battery gauge readings.

Battery use and care tips

• Keep battery contacts and compartment clean.

• Remove batteries if the remote is not expected to be used for several months.

• Do not mix new and old batteries.

• After removing old batteries, wait 20 seconds before inserting new batteries.

• Extreme temperatures reduce battery performance. Avoid putting the System Remote Control in very warm places.

Battery replacement safety rules

CAUTION! To prevent battery shorting, leakage, or rupture:

• Use typical AA Alkaline batteries only.

• Do not mix battery types.

• Do not attempt to recharge a battery unless the battery is speciﬁcally marked “rechargeable.”

• Never dispose of batteries in a ﬁre.

ATTENTION ! Pour empêcher court-circuiter, fuite ou rupture de batterie :

• Utilisez les accumulateurs alcalins typiques d’AA seulement.

• Ne mélangez pas les types de batterie.

• N’essayez pas de recharger une batterie à moins que la batterie soit spéciﬁquement marqué «rechargeable ».

• Ne vous débarassez jamais des batteries dans un feu.

Using the on-screen Navigator (optional)

To use the on-screen Navigator with the remote (if enabled):

1 Press the red Control4 button. The TV’s Navigator opens.

2 To navigate through the on-screen Navigator menus, press

the directional buttons, and press the SELECT button to make your selection.

Using the remote’s List Navigator

Using WATCH and LISTEN buttons

The WATCH button can be conﬁgured to quickly select the last video source watched or display a list of video sources for the room.

The LISTEN button can be conﬁgured to quickly select the last audio source played or display a list of audio sources for the room.

Changing selected rooms

Depending on the room selected on your remote, the remote’s buttons may behave dierently and the List Navigator may have dierent options. For example, with Living Room selected, the but with Theater selected, may turn them completely o.

To change rooms on the remote:

button may have been programmed to dim the lights,

1 Press List, then select Location > Floor > Room.

Changing preferences

To change the remote’s preferences:

1 Press LIST, then select Settings, then Conﬁg.

• To change the List Navigator’s brightness or the keypad brightness, select Display Brightness or Keypad Brightness, press the arrow buttons to adjust, then press SELECT.

• To change the remote’s sensitivity to motion (to wake it from sleep mode), select Motion Detect, then select the sensitivity level.

• To enable or disable the ambient light sensor, select Light Sensor, then select On or O.

• To change the List Navigator’s text color, select Text Color, press the arrow buttons to pick the color, then press SELECT.

• To check the battery charge, select Battery Level.

• To return the remote’s preferences to factory defaults, select Factory Defaults.

Regulatory and safety information

To review regulatory information for your Control4 products, see

ctrl4.co/reg

Warranty

Limited two-year warranty. To review warranty details for your Control4 products, see

www.control4.com/warranty

To control devices from the remote control:

1 On the remote, press LIST to access the List Navigator.

Lighting, Comfort, Security, and other options appear.

2 To navigate through the List Navigator and the Control4

system, press the arrow buttons to scroll through the menus, then press the SELECT button to make your selection.

More help

For the latest version of this document and to view additional materials, open the URL below or scan the QR code.

LATEST VERSION

ctrl4.co/sr260-ug

Winning Home WH100034, WH100036 Quick Guide

Specifications and Main Features

Frequently Asked Questions

User Manual