Winning Home WH100029, WH100030, WH100031 Datasheet
DISTRIBUTED AUDIO SERIES 2
IC62 IN-CEILING 6" OPEN BACK SPEAKER
COMPONENTS
3
/4" (19 mm)
Triad’s IC62 speaker oers homeowners the refined,
musical quality of Triad speakers for their whole home.
This speaker is built around a reinforced poly-mica
woofer for superior bass and an aimable Tetoron-dome
tweeter for a full, natural sound.
Pivoting tweeter
With up to 10 degrees of movement, the pivoting
tweeter delivers high-quality audio to the listener’s
position and oers flexible installation options.
Poly-mica woofer
Mica-infused polypropylene oers a strengthened cone
material with increased rigidity and a high stinessto-weight ratio—while still maintaining the dampening
properties of a traditional polypropylene woofer.
Voice matched
All Distributed Audio Series 2 speakers are voice
matched—allowing homeowners to mix and match
speakers within the series to meet the needs of
each room, while providing identical tonal qualities
throughout the home.
Magnetic mounting
Low-profile frameless grills attach to the speaker with
hidden neodymium magnets for fast installation and a
snug fit. Custom paint-matching is available.
Easy install
Using a tried-and-tested traditional Triad mounting
system with reinforced threaded brass inserts,
Distributed Audio Series speakers install in seconds and
will stay snug to the mounting surface for the life of the
system.
Tweeter size
Tweeter type Tetoron® dome
Woofer size 6 1/2" (165 mm)
Woofer type Poly-mica
PERFORMANCE
Maximum power 125W
Recommended amp power 5 - 125W
Maximum SPL 110 dB
Impedance (nominal) 8 ohm
Impedance (minimum) 5 ohm
Sensitivity (dB @ 2.83V, 1 m) 89 dB
Frequency response (+/-3 dB) 51 Hz - 22 kHz
Dispersion (8K/-6dB) 105°
DIMENSIONS
Hole cutout diameter 7 7/8" (20 cm)
Speaker diameter 9 1/16" (23 cm)
Grill diameter 9 3/16" (23.3 cm)
Mounting depth 4" (10.1 cm)
Product weight 4.05 lb (1.84 kg)
Grill material Metal Perf-Frameless
New construction bracket size NCBIC6
PRODUCT NUMBERS
Speaker TS-IC62
New construction bracket TS-NCBIC6
Round replacement grill TS-GRLIC6R
Square grill TS-GRLIC6S
High-quality spring clamps make connecting speaker
wires simple and quick, while the magnetic frameless
grill fits flush to the mounting surface with ease.
Additionally, the tweeter bridge doubles as a durable
handle, making it easier to hold during installation.
Copyright ©2019, Control4 Corporation. All rights reserved. Control4, Triad, and the Triad logo are registered trademarks
or trademarks of Control4 Corporation or its subsidiaries in the United States and/or other countries. All other names and
brands may be claimed as the property of their respective owners. All specifications subject to change without notice.
201-05262-A
2019-04-30 LW
TRIADAUDIO.COM | PORTLAND, OR
Loading...