Winners Sun Plastic and Electronic WS 19004 1 User Manual
One Axis Gimbal
Federal Communication Commission (FCC) Radiation
Exposure Statement
The device has been evaluated to meet general RF exposure
requirement, The device can be used in portable exposure
condition without restriction Federal Communication
Commission (FCC) Radiation Exposure Statement Power
is so low that no RF exposure calculation is needed.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2)this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio
or TV interference caused by unauthorized modifications
or changes to this equipment. Such modifications or
changes could void the user’s authority to operate the equipment.
Product description
Bluetooth connection
If you use an Android phone, before taking photos,ensure
1
that the volume button of your phone is set to the shutter
button in camera settings.
Open Bluetooth of mobile phone to enter search state and
2
click “Dispho” in equipment searched; after connection is
1
2
3 4
nished,Blue light long on。
3
Usage mode of pan-tilt holder
After clamping the mobile phone
and keeping the phone in natural
balance, then long press the power
button for 3 seconds to turn on the
mobile phone.
Quick Star t Gui de
4
Non- pan-tilt mode
When the pan-tilt is shut down or out of power, the rotation will
screw tight to the locking direction, the rotation function of the
pan-tilt disappears, and it will become an ordinary tripod sele
stick. (When the rotation is reset to the holder end, the pan-tilt
mode will be restored.)
5
6
7
1
8
9
Pan-tilt switch key
2
Balcony indicator
3
Rotate locking knob
4
Micro USB Charging interface
Rotary lock
5
6
Aluminum pull rod
7
Remote Controller Indicator
8
Photo key
9
Tripod
Charging
1
Holder charging mode
Connect the Micro USB interface of the pan-tilt holder for charging,
and the red light will be on for a long time during
charging；the redlamp will be off automatically
nished。
Micro USB interface
the process of
after charging is
Indicator lamp
Photograph key
Dispho
Usage method
1
Mount your phone onto
the sele stick
Silicon rubber case for avoiding empty keys
When using the the mobile phone in horizontal screen status, please
use this accessory when the product cannot work normally due to
touching the keys of the mobile phone.
2
Extend the monopod
After starting up, it will enter the
stable mode, move the holder,
and the mobile phone will always
maintain a constant direction.
Clicking the power button of the
pan-tilt holder, and it will rotate
90 degrees counterclockwise.
90°
Yuntai Rotary Locking button
5
Press the ll light button (optional)
Open the bottom tripod, uplift the pull rod and put tripod on
horizontal plane.
2
Charging Mode of Remote Controller
Connect the Micro USB interface charging,
be on for a long time during the process of charging；the redlamp
will be off automatically
after charging is nished。
and the red light will
Micro USB interface
Powering off
Remote controller: Long press photograph key for 3 s,blue lamp will
icker for 3 times and then be off, which means machine is shut down.
Pan-tilt holder: Long press the "on" button for 3 seconds, and the
green light will be off, indicating it is power off.
Tips
1.When the equipment clamps the platform bracket, try to keep the
equipment in the center, if not in the center, it is recommended to use
the vertical scr
2.Sele stick will enter sleep mode automatically if it is idled for 10
min after Bluetooth connection; pr
connection.
3.When using the Remote contr
Remote control will have a ashing red light for reminder. Charge the
sele stick pr
4.If the battery is running low, the indicator on the sele stick will
ash r
5. For any imbalance of the Product after startup due to sharp
change of temperatur
T
it on desktop horizontally as shown in diagram of and
turn it on;
the holder
beep sound;then it will tur
by now, the tripod head is recovered to normal status.
een mode.
ess photograph key to recover
ol , when the battery is low, the
omptly.
ed. Charge the sele stick promptly.
urn off the tripod head holder and dismantle it, and then place
e or humidity, please handle it as follows:
after this, keep pressing the power key for 5 times, and
will give out 3 short beep sounds followed by 1 long
n off automatically and then start again;
Winners' Sun Plastic & Electronics (Shenzhen)Co., Ltd.
Building E, Yingtai Industrial Zone, Longhua New District,
Shenzhen,China
Loading...