Winnebago Minnie Winny 427P (2004), Minnie Winny 430V (2004), Minnie Winny 431C (2004) Owner's Manual
TO THE OWNER
Congratulations! We welcome you to the exciting world of motor home travel and camping. You will
find it convenient and enjoyable to have all the comforts of home and still enjoy the great outdoors wherever you choose to go.
Your motor home has been carefully designed, engineered and manufactured to provide dependability
as well as safety. Before sliding into the driver’s seat, take a few minutes to become familiar with operations and features. This manual was prepared to aid you in the proper care and operation of the vehicle and
equipment. We urge you to read it completely. In addition, spend some time with the dealer when you take
delivery, you will want to learn all you can about your new motor home.
Your new motor home is covered by a factory warranty against defects in material and workmanship.
This warranty should be validated at once and returned to the factory by your dealer.
About Safety Messages Used in This Manual
Throughout this manual, certain items are labeled Note, Caution, Warning or Danger. These terms alert
you to precautions that may involved damage to your vehicle or a risk to your personal safety. Read and
follow them carefully.
This SAFETY ALERT SYMBOL is used to draw your attention to issues which could involved
potential personal injury. This symbol is used throughout this manual and/or on labels affixed
on or near various equipment in this motor home.
DANGER
DANGER indicates a directly hazardous situation which, if not avoided,
will result in death or serious personal
injury.
.
WARNING
WARNING indicates a potentially
hazardous situation which, if not
avoided, could result in death or serious personal injury.
132000-04-004November 2003
CAUTION
CAUTION indicates a potentially
hazardous situation which, if not
avoided, could result in damage
mainly to equipment or property, but
in some cases may also result in
minor or moderate personal injury.
NOTE: A ‘Note’ is not necessarily safety related
but indicates a recommendation or special point
of information that could assist in understanding
the use or care of a feature item.
OWNER’S NAME
STREET ADDRESS
CITY AND STATE (OR PROVINCE IN CANADA)
MOTOR HOME SERIAL NUMBER
VEHICLE CHASSIS IDENTIFICATION NO. (VIN)
DATE OF DELIVERY TO FIRST RETAIL PURCHASER
VEHICLE MILEAGE AT TIME OF DELIVERY
SELLING DEALER NAME AND ADDRESS
TANK CAPACITIES
Chassis Fuel Tank
Ford Chassis w/6.8L EFI Gas Engine ................................................................................55 gal.
LP Gas Tank
All Models................................................................................................14.4 gal.* (18 gal. w.c.)
Fresh Water Tank
Model 427P ........................................................................................................................30 gal.
Models 430V & 431C .........................................................................................................35 gal.
Water Heater - All Models..................................................................................................6 gal.
HT1 - Black Water Holding Tank
Model 427P (Toilet) ...........................................................................................................42 gal.
Model 430V (Toilet & Lavatory) ........................................................................................35 gal.
Model 431C (Toilet & Lavatory) ........................................................................................35 gal.
HT2 - Gray Water Holding Tank
Model 427P (Shower, Lavatory & Galley) ........................................................................35 gal.
Model 430V (Galley & Shower).........................................................................................38 gal.
Model 431C (Galley & Shower) .........................................................................................38 gal.
*LP Gas tank capacity shown is the usable “full” LP gas capacity, which is 80% of the tank manufacturer’s listed water capacity (w.c. shown in parenthesis). An LP tank must have at least 20% of tank
volume free to allow for expansion and proper vaporization of the liquid fuel. The tank is also equipped
with mandatory safety shut-off equipment that prevents filling above this level.
2004 NEW VEHICLE LIMITED WARRANTY
WINNEBAGO INDUSTRIES, INC.
WARRANTY COVERAGE TO OWNER
Winnebago Industries, Inc. of Forest City, Iowa warrants each new
Winnebago Industries motor home to the owner for use in the U.S.A.
and Canada as follows:
WARRANTY PERIOD
The Warranty Period for all coverages begins on the date the vehicle
is delivered to the first retail purchaser or first placed in service as a
demonstrator or company vehicle.
BASIC COVERAGE
The basic Warranty Period is 12 months or 15,000 miles (24,135
kilometers), on the odometer, whichever occurs first. Winnebago
Industries does not authorize any person to create for it any other
obligations or liability in connection with this vehicle. ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE APPLICABLE TO THIS VEHICLE IS
LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN
WARRANTY AS HEREINBEFORE OR HEREINAFTER
PROVIDED. THE PERFORMANCE OF REPAIRS IS THE
EXCLUSIVE REMEDY UNDER THIS WRITTEN WARRANTY OR
ANY IMPLIED WARRANTY. WINNEBAGO INDUSTRIES SHALL
NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR LOSS OF TIME, INCONVENIENCE, OR OTHER
CONSEQUENTIAL DAMAGE INCLUDING EXPENSE FOR
GASOLINE, TELEPHONE, TRAVEL, LODGING, LOSS OR
DAMAGE TO PERSONAL PROPERTY, OR LOSS OF REVENUE
RESULTING FROM BREACH OF THIS WRITTEN WARRANTY OR
ANY IMPLIED WARRANTY. Some states do not allow limitations on
how long an implied warranty will last or the exclusion or limitation of
incidental or consequential damages, so the above limitations or
exclusions may not apply to you.
ITEMS NOT SUBJECT TO WARRANTY COVERAGE.
Chassis, Drivetrain and related components*
Wheels*
Tires*
Service Items, such as Windshield Wiper Blades, Lubricants, Fluids
& Filters
Adjustments
*These items are covered under the manufacturer’s individual
warranty.
This warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
Also, this warranty shall not apply to failures, damage or
malfunctions resulting from normal wear, misuse, abuse,
negligence, alteration, accident, fire, improper repair of the vehicle or
failure to follow recommended maintenance requirements.
36 MONTHS/36,000 MILE STRUCTURAL WARRANTY
At the expiration of the Basic Coverage and for the remainder of the
period of 36 months or 36,000 miles (57,924 kilometers), on the
odometer, whichever occurs first, Winnebago Industries warrants the
following:
1. Body Thermo-Panel
against delamination. Body Thermo-Panel
bonding of the exterior skin and the interior paneling to an
insulating core material. Delamination (separation of layers)
caused by other factors such as physical damage or failure to
properly maintain sealants is not covered by this warranty.
2. The slide-out room assembly for defects in material or
workmanship.
3. Structural defects of the subfloor and floor. Floor lamination
failure and lamination failure of the subfloor panels and risers
are covered by the structural warranty.
Lamination of the sidewalls and backwall
Lamination is the
______________
______________
______________
Winnebago Industries, Inc.
P.O. Box 152
Forest City, Iowa 50436
ATTENTION: WARRANTY DEPT.
PLACE
STAMP
HERE
WINNEBAGO INDUSTRIES’ RESPONSIBILITY
Any part of the vehicle subject to warranty which is found to be
defective in material or workmanship, will be repaired or replaced at
Winnebago Industries’ option upon notice of the defect without
charge to the customer for parts or labor. While any Winnebago
Industries motor home dealer can perform warranty service, we
recommend you return to the dealership that sold you your vehicle. If
you are touring or have moved, contact any Winnebago Industries
motor home dealer in the United States or Canada for warranty
service.
CUSTOMER RESPONSIBILITY WHEN REPAIRS ARE NEEDED
If a part of the system covered by this warranty fails to function or
requires service during the warranty period:
1. Promptly take the vehicle to the selling dealer for repair or
inspection.
2. Written notice of defects must be given to the selling dealer or
manufacturer no later than 10 days after the expiration of the
warranty.
3. If the dealer is incapable of making the repairs, request that he
contact Winnebago Industries, Inc.
4. If, after the above steps are completed and the repair is not
made, the customer should contact Winnebago Industries, Inc.,
P.O. Box 152, Forest City, Iowa 50436, Attention: Owner
Relations Department (800-537-1885) and furnish the following
information:
− The complete serial number of the vehicle
− Date of retail purchase
− Selling dealer’s name
− Nature of the service problem, and a brief explanation of
the steps or service the dealer has performed, and the
results obtained. The customer may be directed to another
dealer or service center for repairs to be completed, if such
a dealer or service center is better able to complete the
repair.
Winnebago Industries may, at its option, request the vehicle be
returned to Forest City, Iowa for repair. If the customer refuses to
allow repairs to be performed at the Forest City, Iowa facility, the
warranty on that repair will be voided.
5. If after the above steps are completed and the repairs are not
satisfactory, the customer may contact the Service
Administration Manager of W innebago Industries, and request
a customer relations board meeting to resolve the problem.
This action, however, is not mandatory.
6. Certain components are covered beyond the 12 months/15,000
miles basic warranty coverage by the individual manufacturer’s
warranty. Please refer to the component’s information supplied
in the owner’s information InfoCase for any additional warranty
coverage after the basic warranty has expired.
DEALER’S REPRESENTATIONS EXCLUDED
Winnebago Industries, Inc. does not undertake the responsibility to
any purchaser of its products for any undertaking, representation, or
warranty made by dealers selling its product beyond those herein
expressed.
INSTALLATION NOT COVERED
Winnebago Industries, Inc. cannot , however, and does not accept
any responsibility in connection with any of its motor homes for
additional equipment or accessories installed at any dealership or
other place of business, or by any other party other than Winnebago
Industries, Inc. Such installation of equipment or accessories by any
other party will not be covered by the terms of this warranty.
CARE AND MAINTENANCE
It is the owner’s responsibility to perform the care, maintenance and
proper load distribution described in the owner’s manual which
accompanies your motor home. Any damage which results to your
vehicle as a result of your failure to perform such duties, is not
covered.
Damage to appearance items such as fiberglass, metal, paint,
fabrics and trim, may occur during manufacturing or transporting.
Normally, any factory defect or damage is corrected at the factory. In
addition, dealers are obligated to inspect each vehicle upon delivery
to them and prior to delivery to you. You should also immediately
inspect appearance items and advise your selling dealer of any
discrepancies. Damage and normal deterioration due to use and
exposure is not covered by this warranty.
CHANGES IN DESIGN
Winnebago Industries, Inc. reserves the right to make changes in
design and changes or improvements upon its products without
imposing any obligation upon itself to install the same upon its
products theretofore manufactured.
NEW YORK:
If your motor home has been repaired three or more times for the
same nonconformity, defect, or condition, or if your motor home has
been out of service by reason of repair for twenty-one days, Section
198-a of the General Business Law of the State of New York
requires you to provide written notice by certified mail, return receipt
requested, to Winnebago Industries or its authorized dealer before
making any claim under that section of the law. If you do have
problems with your motor home, you should provide written notice to
Winnebago Industries at the following address:
Winnebago Industries, Inc.
P.O. Box 152
Forest City, Iowa 50436
Atten: Owner Relations
PART NO. 701677-K2-004 5-03
----------------------------------------------CUT HERE---------------------------------------------
NOTICE OF SECOND OWNER
ORIGINAL
OWNER
ADDRESS
NEW
OWNER
ADDRESS ZIP CODE
WINNEBAGO INDUSTRIES
IDENTIFICATION NUMBER
CHASSIS IDENTIFICATION NEW OW NER SIGNATURE
IMPORTAN T: THIS NOTICE IS TO BE USED ONLY FOR RECORD KEEPING BY W INNEBAGO INDUSTRIES
The completed form does not constitute an actual change of ownership
NAME
NAME
VEHICLE MILEAGE DATE
.
TABLE OF CONTENTS
INTRODUCTION
About This Manual ....................................... 0- 1
Chassis Operating Guide .............................. 0- 1
Owner’s InfoCase ......................................... 0- 1
Options and Equipment ................................ 0- 2
Before Driving .............................................. 0- 2
Service and Assistance.................................. 0- 2
Warranty ....................................................... 0- 2
Drinking and Driving.................................... 0- 2
Reporting Safety Defects .............................. 0- 2
Vehicle Certification Label........................... 0- 4
Exterior Feature Identification...................... 0- 5
SECTION 1: SAFETY PRECAUTIONS
General Warnings ........................................ 1- 1
Driving ......................................................... 1- 2
Fuel & LP Gas .............................................. 1- 2
LP Gas Leaks ............................................... 1- 3
LP Gas Alarm .............................................. 1- 3
Electrical ...................................................... 1- 4
Loading ........................................................ 1- 5
Maintenance ................................................. 1- 5
Formaldehyde Information .......................... 1- 5
Carbon Monoxide Warning ......................... 1- 5
Carbon Monoxide Alarm ............................. 1- 6
Emergency Exits .......................................... 1- 7
Using Slider Windows as Emergency Exits 1- 7
Fire Extinguisher .......................................... 1- 8
Smoke Alarm ................................................ 1- 8
SECTION 2: DRIVING YOUR MOTOR
HOME
Before Entering Your Vehicle ................... 2-1 1
Before Driving Your Vehicle ....................... 2- 1
Keys .............................................................. 2- 2
Fuel Selection ............................................... 2- 2
Gasoline Fuel Fill.......................................... 2- 2
Fuel Tank Capacity....................................... 2- 2
Starting and Stopping Engine ....................... 2- 3
Fuel Pump Shut-Off Switch.......................... 2- 3
Parking Brake ............................................... 2- 3
Hazard Warning Lights................................. 2- 3
Entrance Door Lock and Handle................... 2- 3
Electric Entrance Step................................... 2- 4
Seats .............................................................. 2- 5
Seat Belts ...................................................... 2- 7
Child Restraints............................................. 2- 8
Mirrors .......................................................... 2- 9
Instrument Panel ........................................... 2- 9
Comfort Controls ........................................ 2- 11
RV Radio .................................................... 2- 11
Auxiliary Battery Switch ............................ 2- 12
Slideout Room ............................................ 2- 13
SECTION 3: IN CASE OF DRIVING
EMERGENCY
Hazard Warning Flasher ............................... 3- 1
Spare Tire Storage ........................................ 3- 1
Motor Home Jacking and Tire Changing
Procedure .................................................. 3- 1
Wheel Nuts ................................................... 3- 2
Recover Towing............................................ 3- 2
Jump Starting ................................................ 3- 3
Connecting Jumper Cables ........................... 3- 3
Connecting A Battery Charger ..................... 3- 4
Engine Overheat ........................................... 3- 4
SECTION 4: TRAVELING WITH YOUR
MOTOR HOME
Loading the Vehicle...................................... 4- 1
Front Axle Tire Alignment ........................... 4- 1
Weighing Your Loaded Vehicle ................... 4- 1
Maximum Occupancy................................... 4- 3
Roof Loading ................................................ 4- 3
Car or Trailer Towing ................................... 4- 3
Pre-Travel Check List................................... 4- 4
Travel Tips.................................................... 4- 5
Severe Weather Information......................... 4- 6
Nighttime Driving......................................... 4- 7
Mountain Driving ......................................... 4- 7
Campsite Set-Up ........................................... 4- 7
Blocking........................................................ 4- 7
Effects of Prolonged Occupancy .................. 4- 8
Humidity and Condensation ......................... 4- 8
SECTION 5: LP GAS SYSTEM
LP Gas Supply .............................................. 5- 1
Safe use of the LP Gas System ..................... 5- 1
How LP Gas Works ...................................... 5- 1
Selecting LP Fuel Types ............................... 5- 2
LP Tank System............................................ 5- 2
Refilling LP Tank ......................................... 5- 3
Air in the LP Gas Tank ................................. 5- 3
Travel with LP Gas ....................................... 5- 3
Regulator....................................................... 5- 3
TABLE OF CONTENTS
LP Gas Leaks ................................................ 5- 4
Winter Use of LP Gas................................... 5- 5
SECTION 6: ELECTRICAL SYSTEMS
110-Volt AC System..................................... 6- 1
External Power Cord..................................... 6- 1
Power Center................................................. 6- 2
Converter ...................................................... 6- 3
Thermal Breaker ........................................... 6- 3
110-Volt Circuit Breakers............................. 6- 3
Ground Fault Circuit Interrupter................... 6- 4
Auxiliary 110-Volt Generator....................... 6- 4
Starting and Stopping the Generator............. 6- 5
Generator Hourmeter .................................... 6- 6
12-Volt DC System....................................... 6- 6
12 Volt Fuses and Circuit Breakers .............. 6- 7
Battery Information....................................... 6- 7
Battery Storage and Maintenance ................. 6- 8
Trailer Wiring Connector.............................. 6- 9
SECTION 7: PLUMBING SYSTEMS
Fresh Water System ...................................... 7- 1
Water Pump .................................................. 7- 1
External Water Supply.................................. 7- 2
Exterior Shower/Wash Station...................... 7- 3
Waste Water System..................................... 7- 3
Dumping Holding Tanks .............................. 7- 4
Holding Tank Level Indicators ..................... 7- 5
Water Drain Valves....................................... 7- 5
Water System Winterization Valve .............. 7- 5
SECTION 8: APPLIANCES AND
INTERIOR FEATURES
Refrigerator................................................... 8- 1
Range and Oven............................................ 8- 4
Monitor Panel ............................................... 8- 6
Direct ignition Gas Water Heater ................. 8- 7
Gas/Electric Water Heater ............................ 8- 8
Motor Aid ................................................... 8- 10
Water Heater By-Pass Valve ...................... 8- 10
LP Gas Furnace........................................... 8- 11
Heat Pump................................................... 8- 11
Ducted Roof Air Conditioning System....... 8- 12
TV Antenna................................................. 8- 13
TV Signal Amplifier ................................... 8- 14
Phone and Cable TV-Hook-Up .................. 8- 15
Video Selector System................................ 8- 15
Satellite Television System......................... 8- 15
DC-AC Electrical Voltage Inverter ............ 8- 16
Exterior Entertainment Center .................... 8- 16
Swivel Glider Lounge Chair ....................... 8- 17
Sleeping Facilities....................................... 8- 17
Dinette/Bed Conversion.............................. 8- 18
Couch Bed Conversion ............................... 8- 19
Fresh Water Toilet ...................................... 8- 22
Power Roof Vent ........................................ 8- 23
Slider Windows........................................... 8- 23
Day/Nighter Pleated Window Shades......... 8- 23
Window Roll-Up Shade Adjustment .......... 8- 23
Quartz Wall Clock ...................................... 8- 23
SECTION 9: CARE AND MAINTENANCE
Sealants ......................................................... 9- 1
Roof .............................................................. 9- 1
Underbody .................................................... 9- 1
Exterior ......................................................... 9- 1
Care of Stripes and Decals............................ 9- 2
Upholstery, Carpeting and Draperies............ 9- 2
Water Stains.................................................. 9- 4
Ultraleather Upholstery................................. 9- 5
Cabinetry....................................................... 9- 5
Vinyl Wallboard ........................................... 9- 5
Tables and Countertops ................................ 9- 5
Galley Sink .................................................. 9- 6
Galley Sink ................................................... 9- 6
Range and Refrigerator................................. 9- 6
Bathroom ...................................................... 9- 7
Doors and Windows...................................... 9- 7
Vehicle Maintenance .................................... 9- 7
Tires .............................................................. 9- 7
Suspension Alignment and Tire Balance...... 9- 8
Windshield Washers and Wipers.................. 9- 8
Lights ............................................................ 9- 8
Awning Installation....................................... 9- 9
SECTION 10: STORING YOUR MOTOR
HOME
Preparing Vehicle for Storage..................... 10- 1
Cold Weather Storage Procedure................ 10- 1
Removal from Storage ................................ 10- 3
INTRODUCTION
Congratulations on the purchase of your new
Minnie Winnie motor home, which has been
carefully designed, engineered and quality built
by Winnebago Industries, Inc.
ABOUT THIS MANUAL
Please read this operator’s manual completely to understand how everything in your coach
works before taking it on its “maiden voyage.”
This manual is a guide to safe operation of the
features, equipment and controls in this coach.
Some equipment, such as the vehicle chassis and
certain electronic systems or appliances, have
their own comprehensive, manufacturer supplied
manuals or information sheets which describe
operation of these products in great detail. This
manual will refer you to the manufacturer’s information included in your Owner I
whenever necessary.
SUBJECT ICONS - To make it easier for you
to find information you’re looking for, we have
placed convenient, pictorial symbols called
“icons” beside many of the subject headings in
this manual. The icons correspond to the subject
matter of the section. These icons were designed
similar to the familiar international symbols
which identify public facilities such as restrooms
and handicap access. There are several examples
of icons on this page.
PAGE ICONS - The icons at the upper corners of each page correspond to the primary content of each main section of the manual, such as
LP Gas, Electrical, Plumbing, etc. This means
you can flip through the manual either forward or
backward and know exactly which main section
you are looking for just by watching the icons at
the top of the page. This means less paging back
and forth.
We also urge you to read the complete
Chassis Operating Guide provided by the
chassis maker and all other operating information provided by our equipment suppliers
and manufacturers. This is contained in your
TM
Owner INFOCASE
.
NFOCASE
This manual should be kept in the vehicle at
all times for personal reference. The operator’s
manual, I
are to be considered permanent components of
this vehicle. They should remain in the vehicle
when sold to provide the next owner with important safety, operating and maintenance information.
NOTE: The descriptions, illustrations, and spec-
NFOCASE and chassis operating guide
ifications in this manual were correct at
the time of printing. We reserve the right
to change specifications or design without notice, and without incurring obligation to install the same on products
previously manufactured.
CHASSIS OPERATING
GUIDE
Throughout this manual, frequent reference
is made to the vehicle chassis operating guide.
The chassis guide is the operator’s manual provided by the manufacturer of the chassis on
which this motor home is built (i.e., or Ford).
Consult the chassis guide for operating safety and
maintenance instructions pertaining to the chassis section of the motor home.
OWNER’S INFOCASE
Your Owner’s InfoCase contains information
supplied by manufacturers of individual appliances and equipment installed in your motor
home.
Consult this information regarding the operation and care of appliances, accessories and
special equipment.
0-1
INTRODUCTION
OPTIONS AND EQUIPMENT
This model is available in several sizes and
floorplans, so accessories and components may
differ slightly between models. Some equipment
described in this manual may not apply to your
coach.
BEFORE DRIVING
Before sitting in the driver’s seat, always
check around your vehicle to be sure you have
proper clearance for maneuvering. If necessary,
have a passenger help guide you out of a difficult
parking space.
Although your coach features automotive
conveniences like power steering and power
brakes, driving a motor home is different from
driving a car. A motor home is larger and heavier
than an automobile, so it requires more stopping
and passing distance, and more parking and maneuvering space than does a car.
Always be aware of the size of your motor
home. The added height of roof air conditioners,
TV antennas or luggage boxes may cause clearance problems around some tunnels, canopies
and hanging signs. Know the height of your unit
so you can observe posted clearance limits. Also,
remember that some bridges, old ones in particular, may not support the weight of your motor
home. Know the weight of your unit and observe
any posted weight limits.
Remember: Always use your seat belt and be
sure your passengers do so as well. We also advise making frequent rest stops while traveling to
relieve stress on yourself, your passengers and
your vehicle.
Your dealer will provide quality maintenance
and any other assistance that you may require
during your ownership of this vehicle.
If you need warranty repairs while traveling,
you may take your motor home to any Winnebago or Itasca dealership and they will assist you.
WARRANTY
Your new vehicle is covered by a factory
warranty against defects in material and workmanship. This warranty should be validated immediately and returned to the factory by your
dealer. For additional information, see your
“New Vehicle Limited Warranty” included with
this vehicle.
DRINKING AND DRIVING
Winnebago Industries supports the recommendations of the Presidential Commission on
Drunk Driving.
• Exercise your good judgment and encourage
others to do the same.
• Know the legal limits and do not exceed
them.
• Also know your personal limits, which may
be lower than the legal limits.
• Should you ever exceed your limits, find al-
ternative transportation; call a cab, ask a
friend to drive you home or call a family
member to come and get you.
SERVICE AND
ASSISTANCE
Your dealer will be glad to provide any additional information you need, as well as answer
any questions you might have about operating the
equipment in your motor home. When it comes to
service, remember that your dealer knows your
vehicle best and is interested in your satisfaction.
0-2
The presence of alcohol in significant levels
in the blood increases the probability that the
driver will be involved in an accident.
REPORTING SAFETY DEFECTS
If you believe that your vehicle has a defect
which could cause a crash or could cause injury
or death, you should immediately inform the
National Highway Traffic Safety Administration
(NHTSA) in addition to notifying Winnebago
Industries, Inc.
If NHTSA receives similar complaints, it
may open an investigation, and if it finds that a
safety defect exists in a group of vehicles, it may
order a recall and remedy campaign. However,
NHTSA cannot become involved in individual
problems between you, your dealer, or Winnebago Industries.
To contact NHTSA, you may either call the
Auto Safety Hotline toll-free at 1-800-424-9393
(or 366-0123 in Washington, D.C. area) or write
to: NHTSA, U.S. Department of Transportation,
Washington, D.C. 20590. You can also obtain
other information about motor vehicle safety
from the Hotline.
INTRODUCTION
0-3
INTRODUCTION
VEHICLE CERTIFICATION LABEL
This label contains vehicle identification and other important reference information. The vehicle certification label is located on the sidewall to the left of the steering wheel, or on the driver’s door. Never
remove or destroy this label.
MANUFACTURED BY
3
GAWR:
FRT______ LB______ KG________________ ________________ ______ PSI______ KPA SINGLE
RR. _______ LB______ KG________________ ________________ ______ PSI______ KPA______
THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL MOTOR VEHICLE SAFETY
STANDARDS IN EFFECT ON THE DATE OF MANUFACTURE SHOWN ABOVE.
SERIAL NO. _________________________ VIN______________________________
TYPE ____________________ MODEL ____________________ COLOR__________
5
10
12
SUITABLE TIRE AND RIM CHOICE COLD INFLATION
EXPLANATION OF DATA
1. Chassis manufacturer.
2. Chassis manufacture date.
3. Month and year of manufacture at Win-
nebago Industries.
4. Gross Vehicle Weight Rating: Total permis-
sible weight of the vehicle, including driver,
passengers, total cargo carried (including all
liquids) and equipped with all options.
5. Gross Axle Weight Rating: Total permissi-
ble weight allowed for the front and rear
axles (listed in pounds and kilograms).
6. Suitable Tire Choice: Tires recommended to
meet handling and safety requirements.
When replacing any of the tires on your
vehicle, always replace with a tire that meets
these specifications.
7. Suitable Rim Choice: Wheel rims recom-
mended to meet handling and safety require-
INCOMPLETE VEHICLE MANUFACTURED
BY MOTOR CORP.
MONTH AND YEAR OF MANUFACTURE:________
GVWR_______LB _________KG
TIRE RIM PRESSURE
6
1
4
7
11
13
8
14
10. Serial Number: This is the serial number
assigned to the completed vehicle by Winnebago Industries.
11. Vehicle Identification Number (VIN): This
number identifies the chassis on which the
motor home is built. The 10th digit of the
VIN designtes the chassis model year.
(2=2002, 3=2003, 4=2004, ). This information is useful when ordering chassis repair
parts.
12. Type: States the NHTSA designated usage
classification for your motor home. MPV
signifies a Multi-purpose Passenger Vehicle.
13. Model: Lists the Winnebago product model
number of your vehicle.
14. Color: Signifies the color code number of the
decor used throughout the vehicle. This
number is necessary for ordering replacement cushions, curtains, carpet, etc.
2
ments. When replacing any of the rims on
your vehicle, always replace with a rim that
meets these specifications.
8. Cold Inflation Pressure: Inflation pressures
recommended (while Cold) for the tires originally equipped on your vehicle. These pressure levels must be maintained to assure
proper handling, safety and fuel economy.
9. Rear Axle Wheel Configuration: Single or
Dual.
9
0-4
INTRODUCTION
EXTERIOR FEATURE IDENTIFICATION - Class C Motor Homes
Typical model shown for illustration purposes only.
Actual locations of features may vary depending on your model and option combinations
1. Roof Access Ladder
2. Assist Handle
3. TV Antenna
4. Refrigerator Vent
5. Roof Air Conditioner
6. Porch Light
13. Water Heater Access*
14. Range Hood Vent
15. Refrigerator Service Access
16. Auxiliary Generator Compartment
17. Water Tank Fill
18. Utility Systems Compartment
7. LP Gas Tank Access
8. Storage Compartment
9. 110-Volt Outlet
10. Ext. Entertainment Center
11. Storage Compartment
12 .Storage Compartment
19. Fuel Tank Fill
20. Storage Compartment
21. Furnace Intake Exhaust
22. Storage Compartment
23. Storage Compartment
NOTE: Some equipment shown may be optional.
*CAUTION: Be careful. These features may become HOT while water heater or furnace are in use
0-5
SECTION 1
SAFETY PRECAUTIONS
Read and understand all instructions and precautions in this manual before operating your
new motor home.
About Safety Messages Used in This Manual
Throughout this manual, certain items are labeled Note, Caution, Warning or Danger. These
terms alert you to precautions that may involved
damage to your vehicle or a risk to your personal
safety. Read and follow them carefully.
This SAFETY ALERT SYMBOL is
used to draw your attention to issues
which could involved potential personal
injury. This symbol is used throughout
this manual and/or on labels affixed on
or near various equipment in this motor
home.
DANGER
DANGER indicates a directly hazardous situation which, if not avoided,
will result in death or serious personal
injury.
NOTE: A ‘Note’ is not necessarily safety related
but indicates a recommendation or special point
of information that could assist in understanding
the use or care of a feature item.
The following pages provide safety precautions that must be adhered to. These precautions
as well as others that involve possible injury or
damage to equipment are also displayed in the
appropriate areas in this manual.
GENERAL WARNINGS
• Only seats equipped with seat belts are to be
occupied while the vehicle is moving.
• Make sure all passengers have seat belts fas-
tened in a low and snug position so the force
exerted by the belt in a collision will be
spread across the strong hip area. Pregnant
women should wear a lap-shoulder belt
whenever possible, with the lap belt portion
worn low and snug throughout the pregnancy.
WARNING
WARNING indicates a potentially
hazardous situation which, if not
avoided, could result in death or serious personal injury.
CAUTION
CAUTION indicates a potentially
hazardous situation which, if not
avoided, could result in damage
mainly to equipment or property, but
in some cases may also result in
minor or moderate personal injury.
• All seats which can be positioned, such as
swiveling, sliding, reclining, or footrest out,
must be placed in a fully upright and swivellocked position with footrests retracted while
the vehicle is moving. Some swivel lounge
chairs are designed to lock in a forward
facing position, while others lock in an aisle
facing position. Be certain these seats are
secure from swiveling before traveling.
.
• Never let passengers stand or kneel on seats
while the vehicle is moving.
• Sleeping facilities are not to be utilized while
vehicle is moving.
• Examine the escape window and be familiar
with its operation, but do not use except in an
emergency.
1-1
SECTION 1
SAFETY PRECAUTIONS
• Ιnspect the fire extinguisher monthly for
proper charge and operating condition. This
should also be done before beginning a vacation or any extended trip.
DRIVING
• Do not attempt to adjust the driver’s seat
while the vehicle is moving.
• Do not adjust tilt steering in a moving vehicle.
• Do not operate the cruise control on icy or extremely wet roads, winding roads, in heavy
traffic, or in any other traffic situation where
a constant speed cannot be maintained.
• Use care when accelerating or decelerating
on a slippery surface. Abrupt speed changes
can cause skidding and loss of control.
• Driving through water deep enough to wet
the brakes may affect stopping distance or
cause the vehicle to pull to one side. Check
brake operation in a safe area to be sure they
have not been affected. Never operate any
vehicle if a difference in braking efficiency is
noticeable.
• Adverse weather conditions and extremes in
terrain may affect handling and/or performance of your vehicle. Refer to your chassis
manual for related information.
FUEL & LP GAS
• All pilot lights must be extinguished and appliances turned off while refilling the fuel
tank or LP tank.
• Never smoke while refilling vehicle fuel tank
or LP gas tank.
• Avoid inhaling exhaust gases produced by
burned gasoline, diesel fuel or LP gas in
items such as the range, chassis engine, generator engine, refrigerator, furnace and water
heater. They contain carbon monoxide,
which is an odorless, colorless and poisonous
gas.
• Do not bring or store LP gas containers, gasoline or other flammable liquids inside the
vehicle because a fire or explosion may result. LP gas containers are equipped with
safety valves which relieve excessive pressure by discharging gas to the atmosphere.
• Do not fill LP gas container(s) above 80 percent of capacity. Overfilling the LP gas container can result in uncontrolled gas flow
which can cause fire or explosion. A properly
filled container will contain approximately
80 percent of its volume as liquid LP gas.
• Never use an open flame to test for LP gas
leaks. Replace all protective covers and caps
on LP system after filling. Make sure valve is
closed and door latched securely.
• Never connect natural gas to the LP gas system.
• When lighting range burners do not turn
burner controls to “On” and allow gas to escape before lighting match.
• Portable fuel-burning equipment, including
wood and charcoal grills and stoves, shall not
be used inside the recreational vehicle. The
use of this equipment inside the recreational
vehicle may cause fires or asphyxiation.
• LP gas regulators must always be installed
with the diaphragm vent facing downward.
Regulators are equipped with a protective
cover. Make sure that the regulator vent faces
downward and that the cover is kept in place
to minimize vent blockage which could result
in excessive gas pressure causing fire or explosion.
1-2
• The following warning label is located in the
cooking area to remind you to provide an adequate supply of fresh air for combustion.
WARNING
IT IS NOT SAFE TO USE
COOKING APPLIANCES
FOR COMFORT HEATING
Cooking appliances need fresh air for safe
operation. Before operation
1. Open overhead vent or turn on exhaust fan.
2. Open window
FAILURE TO COMPLY COULD RESULT IN
DEATH OR SERIOUS INJURY.
Unlike large homes, the oxygen supply inside
a recreational vehicle is limited due to its
size. To avoid danger of axphyxiation, provide proper ventilation when using the gas
rangetop or gas oven. It is especially important that the gas oven and range top not be
used for comfort heating. Danger of asphyxiation is greater when these appliances are
used for long periods of time.
LP GAS LEAKS
The following label is located in the vehicle
near the range area. If you smell gas within the
vehicle, quickly and carefully perform the procedures listed.
SECTION 1
SAFETY PRECAUTIONS
LP GAS ALARM
Your coach is equipped with an LP gas detector which sounds an alarm if an unsafe amount of
LP gas is present inside the coach. Because LP
gas is heavier than air, the detector is located on
a cabinet face near the floor of the coach.
A green light on the face of the alarm shows
when the unit is active. If the detector senses LP
gas, the alarm will make a loud, pulsating sound
and the red light will come on. Pressing the
“MUTE” button will stop the alarm for 60 seconds. If there is no more detectable LP gas, the
alarm will stay off. If the detector still senses LP
gas by the end of the 60 second mute mode, the
alarm will sound again
Press to stop alarm
DANGER
IF YOU SMELL GAS
1. EXTINGUISH ANY OPEN FLAME, PILOT LIGHTS AND
ALL SMOKING MATERIALS.
2. DO NOT TOUCH ELECTRICAL SWITCHES.
3. SHUT OFF THE GAS SUPPLY AT THE TANK VALVE(S)
OR GAS SUPPLY CONNECTIONS.
4. OPEN DOORS AND OTHER VENTILATING OPENINGS.
5. LEAVE THE AREA UNTIL ODOR CLEARS.
6. HAVE THE GAS SYSTEM CHECKED AND LEAKAGE
SOURCE CORRECTED BEFORE USING AGAIN.
FAILURE TO COMPLY COULD RESULT IN
EXPLOSION RESULTING IN DEATH OR
SERIOUS INJURY.
Green
(Active)
Red
(Alarm)
Amber
(Low Batt.)
If The Alarm Sounds
If the alarm sounds, do not touch any electrical
switches. Immediately turn off the main LP tank
valve and all LP appliances, open all windows
1-3
SECTION 1
SAFETY PRECAUTIONS
and roof vents, and leave the coach until the
alarm stops sounding.
If the alarm keeps sounding at regular intervals, a leak may be present. Contact your dealer
or an LP gas service center to have the problem
corrected before using the LP system again.
If the coach batteries become extremely
drained (8.5 volts or less), the amber Low Voltage/FAULT light on the face of the alarm will
come on, and in some rare cases the LP alarm
may begin to sound on its own. If this happens,
connect the shoreline to 110-volt supply to recharge the house batteries.
Other Combustible Fumes or Vapors
This alarm is designed to detect the presence
of LP gas, however there are other combustible
fumes or vapors which may be detected by the
sensor. These include: alcohol, liquor, deodorants, colognes, perfumes, wine, adhesives, lacquer, kerosene, gasoline, glues, most all cleaning
agents and the propellants of aerosol cans. Most
are lighter than air in their vapor state and will
only be detected when the area is closed up.
Glues and adhesives may exhaust hydrocarbon
vapors for months after they are applied. They
are easily activated by high temperatures. If you
close up an RV coach on a hot day, the chemicals
used in its construction may be detected for
months after the coach was manufactured.
Further Information
See the manufacturer’s information supplied
in your Owner InfoCase for further descriptions
and directions including monthly testing and
troubleshooting.
WARNING
Never use an open flame to test for
gas leaks. When testing for gas line
leaks with a soapy water solution, DO
NOT use a detergent containing
ammonia or chlorine. These substances may generate a chemical
reaction causing corrosion to gas
lines, resulting in dangerous leak conditions.
Power Connection
The gas alarm is powered by the coach batteries. If the battery cable is disconnected from the
batteries, auxiliary battery switch is shut off, or
the circuit breaker is tripped, the alarm will not
work. The LP gas alarm breaker is located on the
power converter breaker panel. See Section 6 Electrical Systems.
Because the LP gas alarm is connected directly to the auxiliary battery, it is always drawing a
small amount of current. Even though this current
draw is slight, it could drain the coach battery
during storage periods when the house battery
will not be charged regularly by the engine or
shoreline. To avoid battery discharge we recommend turning the Aux Batt switch off during storage periods and after periodic or weekend usage.
Further Information
See the manufacturer’s information entitled
“Your LP Gas Detector” in the Owner InfoCase
for further instructions on nuisance alarms and
care and testing of the LP gas detector.
ELECTRICAL
• Careless handling of electrical components
can be fatal. Never touch or use electrical
components or appliances while feet are bare,
while hands are wet, or while standing in
water or on wet ground.
• Improper grounding of the vehicle can cause
personal injury. Do not plug the utility power
cord into an outlet which is not grounded and
do not adapt the plug to connect to a receptacle for which it is not designed.
• Do not attach an extension cord to the utility
power cord.
• Be sure that all electrical appliances to be
used contain 3-prong plugs for proper
grounding.
• Avoid overloading electrical circuits. Re-
place fuses or circuit breakers with those of
the same size and amperage rating only. Never use a higher rated fuse or breaker.
1-4
SECTION 1
SAFETY PRECAUTIONS
• Use caution when handling or working near
electrical storage batteries. Always remove
jewelry and wear protective clothing and eye
covering. Avoid creating sparks.
LOADING
• Store or secure all loose items inside the
motor home before traveling. Possible over
looked items such as canned goods or small
appliances on the countertop, cooking pans
on the range, or free-standing furniture items
can become dangerous projectiles during a
sudden stop or evasive maneuver.
• Be aware of GVWR, GAWR and individual
load limit on each tire or set of duals. (See
“Loading the Vehicle” in Section 4.)
• Never load the motor home in excess of the
gross vehicle weight rating or the gross axle
weight rating for either axle.
• Do not attempt to start the vehicle by hot wiring.
FORMALDEHYDE INFORMATION
WARNING
Some components in this vehicle contain formaldehyde based adhesives
which may release formaldehyde
fumes into the air for an unknown
period of time until total dissipation
occurs. Individuals who are allergic
to formaldehyde gas fumes may
experience irritation to eyes, ears,
nose and throat. Reaction in infants
may be more severe. Although long
range effects are not well understood,
testing to date has not revealed any
serious health effects in humans at the
level of emission from these products.
NOTE: Your motor home’s load capacity is
designated by weight, not by volume, so
you cannot necessarily use all available
space when loading your motor home.
MAINTENANCE
• Do not remove the radiator cap while engine
and radiator are still hot. Always check coolant level visually at the see-through coolant
reservoir.
• Never get beneath a vehicle that is held up by
a jack only.
• Do not mix different construction types of
tires on the vehicle such as radial, bias or belted tires, as vehicle handling may be affected.
Replace tires with exact size, type and load
range.
NOTE: To aid in dissipation, ventilate the vehi-
cle by opening all windows and circulating the air with a fan.
CARBON MONOXIDE
WARNING
WARNING
Avoid inhaling exhaust gases, as they
contain carbon monoxide, which is a
colorless, odorless and poisonous gas.
If you suspect that exhaust fumes are entering
the passenger compartment, have the cause determined and corrected as soon as possible. If you
must drive under these conditions, drive only
with ALL WINDOWS FULLY OPENED.
1-5
SECTION 1
SAFETY PRECAUTIONS
The best protection against carbon monoxide
entry into the vehicle body is a properly maintained engine exhaust and ventilation system. It is
recommended that the exhaust system and body
be inspected by a qualified motor home service
center.
• Each time the vehicle is raised for an oil
change.
• Whenever a change in the sound of the ex-
haust system is noticed.
• Whenever the exhaust system, underbody or
rear of the vehicle is damaged.
To allow proper operation of the vehicle’s
ventilation system, keep front ventilation inlet
grill clear of snow, leaves or other obstructions at
all times. DO NOT OCCUPY A PARKED VEHICLE WITH ENGINE RUNNING FOR AN
EXTENDED PERIOD.
Do not run engine in confined areas, such as a
garage, except to move vehicle in or out of area.
When vehicle is stopped in an UNCONFINED
area with the engine running for any more than a
short period, adjust heating or cooling system to
force outside air into the vehicle as follows:
1. Set fan to medium or high speed and vent
control to air.
2. On vehicles equipped with air conditioning,
set fan to medium or high speed and set control to obtain maximum vent air.
Rear windows should be closed while driving
to avoid drawing dangerous exhaust gases into
the vehicle.
CARBON MONOXIDE
ALARM
Red Light
(Press to Test Alarm)
Yellow Light
(Warning)
The CO alarm is powered by a 9-volt battery
and contains a sensor that is designed to detect
toxic carbon monoxide gas fumes resulting from
incomplete combustion of fuel. It will detect CO
gas from any combustion source such as the furnace, gas range/oven, water heater, refrigerator,
chassis engine, and electric generator engine.
• Patented biomimetic sensor mimics the
human response to Carbon Monoxide.
• Test/Reset alarm circuitry, microprocessor,
battery and horn.
• Red light flashes once every thirty seconds in
normal operation.
• Continuous yellow light with a beep every
three seconds indicates an unhealthy CO
level.
• Continuous red light and pulsating alarm
signal a dangerous CO condition.
• Battery operation provides protection 100%
of the time. Low battery signal alerts consumer of need to replace battery.
• 85 decibel alarm assures waking during
sleeping hours.
Your coach is equipped with a carbon
monoxide (CO) alarm, located on the ceiling in
the bedroom area.
1-6
Monthly Testing
Press the TEST button on the face of the alarm
periodically (at least monthly) to check the function of the alarm and condition of the battery. If
the alarm begins to beep every few seconds, the
battery may be weak and need replacement.
(Press the TEST button to be sure before replacing the battery.) If the alarm sounds, the battery
may still be okay. If the alarm still beeps every
few seconds, check the smoke detector also. The
“low battery” warning beep is similar on many
SECTION 1
RED LOOP
SAFETY PRECAUTIONS
alarm devices, so the origin of this electronic
sound can be deceiving.)
Further Information
Please read the manufacturer’s guide included
in your Owner InfoCase. It includes information
on precautions, operational testing, and battery/
sensor replacement.
EMERGENCY EXITS
Emergency Exit Windows
Your motor home is equipped with one of
these types of emergency exit windows in the
rear of the vehicle that functions as an escape exit
in an emergency situation.
Side Escape Window
The side mounted escape window is secured
by two red safety latches and can be opened by
first releasing these two latches and then pushing
outward on the lower part of the window. Identify which type of emergency exit window is in
your vehicle.
Instructions for removal are also located near
the latches for quick reference and for passengers
who may not be familiar with the exit. Never remove or destroy this label.
Instructions for removal are also located on a
label on the glass for quick reference and for passengers who may not be familiar with the exit. Be
sure this label is never removed or destroyed.
WARNING
Use emergency window for emergency exit only. Do not test for proper
operation.
If the cord is released by accident, but the
glass remains in place, the cord can be replaced
using a blunt instrument, preferably one made of
plastic. We suggest you contact your dealer for
assistance.
Lift Both Handles Up
Push Out on Bottom of Window
Rear Escape Window
To open, pull on the red plastic loop at the bottom of the window until the rubber cord is completely removed. This allows the window to be
pushed out.
WARNING
Use care when exiting emergency
window, as broken glass may be
present in the exit area.
USING SLIDER WINDOWS AS
EMERGENCY EXITS
Most slider windows along the side of the motor home can also be used as emergency exits,
should the need arise. To use the windows as exits, first slide the window open, then slide the
screen open.
1-7
SECTION 1
SAFETY PRECAUTIONS
FIRE EXTINGUISHER
A dry chemical fire extinguisher is located
near the floor by the side entrance door.
We recommend that you become thoroughly
familiar with the operating instructions displayed
on the side of the fire extinguisher or in the information supplied in your Owner InfoCase.
We also recommend that you inspect the fire
extinguisher for proper charge at least once a
month in accordance with National Fire Protection Association (NFPA) recommendations as
stated on the label. If the charge is insufficient,
the fire extinguisher must be replaced.
WARNING
Do not test the fire extinguisher by
discharging it. Partial discharge can
cause leakage of pressure or contents
which would render the unit inoperative when needed. When using the
fire extinguisher, aim the spray at the
base of the fire.
1. The smoke alarm should be tested for correct
operation each time the vehicle is brought
out of storage, before each trip, and at least
once a week during motor home use. To test
the electronics, firmly depress the button. To
test that smoke reaches the sensor, blow
smoke in a careful, fire-safe manner into
your smoke alarm.
Press Button
to Test
2. Your smoke alarm will not work without
power. Never remove the battery to quiet the
alarm. When your smoke alarm “beeps”
about once a minute the battery is weak.
Install a new battery immediately. Be sure to
use only batteries specified in manual or on
unit. Test unit after installing a new battery.
3. Clean and vacuum the openings on your
smoke alarm once a month.
4. Do not open the smoke alarm or try to repair
it. For replacement information see warranty
in Owner’s Manual.
5. Smoke alarms have technical limitations and
may not respond in all situations. FIRE PREVENTION is your best safeguard.
SMOKE ALARM
Your motor home is equipped with a smoke
alarm located on the ceiling in the galley area.
This alarm meets U.L. Standard 217 and NFPA
Standard 74 for operation of smoke detection
devices.
1-8
See your Owner InfoCase for further informa-
tion.
SECTION 2
DRIVING YOUR MOTORHOME
(See also Safety Precautions, Section 1 of this
manual.)
NOTE: See your Ford Owner’s Guide for infor-
mation on starting the engine, operating
the transmission, steering column controls descriptions of instrument gauges
and other chassis related information.
Some items described in this section may
be optional or unavailable on your
coach.
BEFORE ENTERING YOUR
VEHICLE
Before entering your vehicle, there are a few
recommended procedures that will aid in your
driving safety and equipment.
1. Be sure that the windows, mirrors and light
lenses are clean and unobstructed.
2. Make sure all exterior lights operate prop-
erly.
3. Check tires for proper cold inflation pres-
sures and inspect for any unusual wear.
4. Check wheel lug nuts for tightness.
5. Look beneath the vehicle for noticeable fluid
leakage.
6. Check fluid levels and fill if necessary. This
includes engine oil, transmission fluid, coolant, brake fluid, power steering fluid and
windshield washer solvent.
WARNING
The transmission must be in P (Park)
and park brake engaged while performing any checks or adjustments.
The engine should be shut off unless
specifically required for a certain procedure.
7. Unhook and store sewer and water supply
hoses.
8. Retract step.
9. Be sure that all of your cargo is secured
before traveling. Be aware of loose items on
tables or countertops, or free-standing furniture items that could become dangerous projectiles during a sudden stop or evasive
maneuver.
10. Check around your vehicle in all directions
to assure that you have proper clearance.
11. Lower TV antenna and/or satellite dish.
12. Disconnect and store shoreline.
WARNING
Before driving your vehicle, be sure
you have read the entire operator’s
manual and that you understand your
vehicle’s equipment completely and
how to use the equipment safely.
BEFORE DRIVING YOUR
VEHICLE
Before preparing to drive your vehicle, here
are a few recommended procedures that will add
to your driving safety and enjoyment.
1. Be sure that you adjust the interior and exte-
rior rear view mirrors to your driving preference.
2. Adjust the driver's seat for proper distance
from foot pedals and steering wheel to allow
for safety and ease in controlling your vehicle.
3. Place front seats in the forward facing posi-
tion.
4. Be sure to fasten all safety belts to fit you
comfortably, but tight enough to obtain the
full safety of the belts.
5. Make sure all doors are completely shut and
locked. When the doors are shut and locked,
2-1
SECTION 2
DRIVING YOUR MOTOR HOME
there is less chance of the doors flying open
in event of an accident. It also prevents unintentional opening of doors and keeps intruders out of your vehicle.
6. Check to see that all gauges are operating
properly.
7. Check the fuel level in the vehicle.
8. Be certain that the fire extinguisher is fully
charged and secure in its mounting bracket.
CAUTION
Be sure hood and all compartment
doors are latched securely before
driving vehicle.
KEYS
Your motor home is supplied with several sets
of keys. In addition to the chassis manufacturer's
ignition key, you receive keys for front doors, entrance door, and exterior compartment doors.
Each set of keys has an identification number,
either a small metal tag or stamped into the key
head. Record these numbers and keep them in a
safe place. In case keys are lost or stolen, your
dealer or a locksmith can provide you with duplicate keys or modify the locks.
NOTE: Keys should always be removed when
leaving the vehicle. Since doors can be
locked without keys, make sure they have
been removed from the ignition before
locking the driver’s compartment.
WARNING
Modern fuel systems may build up
pressure within the tank as the gasoline warms during use or in hot weather.
Under certain conditions, sudden
release of this pressure when removing the gasoline cap can spray gasoline from the fuel fill opening,
causing a possible hazard.
GASOLINE FUEL FILL
REMOVING THE FUEL CAP
When removing the gasoline cap, slowly rotate it only far enough to allow pressure to re-
lease. After any "hissing" sounds stop, continue
removing the cap.
FILLING THE TANK
Do not overfill the fuel tank. Allow gasoline
to pump into the tank until the auto-shutoff valve
in the fuel pump nozzle stops the flow of fuel, indicating a full tank. This provides a pre-determined vapor space at the top of the tank to allow
for expansion of the gasoline.
CAUTION
Continuing to fill above this level
may cause damage to the fuel/evaporative emission system.
FUEL SELECTION
Refer to your chassis operating guide for the
manufacturer's recommendations on proper fuel
selection.
2-2
Chassis Fuel Tank Capacity
Ford Chassis w/6.8L EFI Gas Engine .55 gal.
REPLACEMENT FUEL CAPS
To protect gasoline system from excessive
pressure or vacuum, or from sudden pressure, replace lost caps with caps of the same design
available from your dealer.
SECTION 2
DRIVING YOUR MOTOR HOME
STARTING AND
STOPPING ENGINE
Refer to your chassis operating guide for the
manufacturer's recommendations on starting and
stopping the engine.
Brake-Shift Interlock
Ford chassis are equipped with a brake-shift
interlock safety feature. The shift lever cannot be
moved from the Park position unless the ignition
is ON and the service brake pedal is pressed.
NOTE: On Ford chassis, if the brake light fuse is
blown, the interlock feature will not work
properly and an alternate method must
be used. See your Ford Owners Guide
for detailed instructions on what to do in
this situation.
FUEL PUMP SHUT-OFF SWITCH
Vehicles built on Ford chassis are equipped
with an inertial type switch that shuts off the fuel
pump in the event of collision. This switch must
be manually reset to resume the fuel supply to the
engine.
See your Ford Owners Guide for location and
reset procedures for this switch.
NOTE: It is possible to accidentally trigger the
fuel pump shut-off switch by abruptly
striking an object such as a curb or parking block. If your vehicle exhibits symptoms of running out of fuel immediately
after such an occurrence, the fuel pump
shut-off switch may need to be reset.
Consult your Ford chassis operating
guide for additional information.
PARKING BRAKE
Never drive your vehicle with the parking
brake set. This will reduce parking brake effectiveness and cause excessive wear. Consult your
chassis operating guide in your Owner InfoCase
for operating instructions.
HAZARD WARNING
LIGHTS
See your chassis operating guide for operation
of the hazard flasher switch. See also Section 3
for supporting information.
DOOR LOCKS AND HANDLES
NOTE: Keys should always be removed when
leaving the vehicle. Since doors can be
locked without keys, make sure they have
been removed from the ignition before
locking the driver’s compartment.
The entrance door may be opened from outside the vehicle by pulling the door handle outward. To open the door from inside, pull outward
on the door handle. When the door is locked, neither the inside nor the outside door handle can be
operated.
Power Door Locks
Ford chassis models are equipped with power
door lock switches on the cab doors. The cab
door power lock switches also control the
entrance door power lock. This means that anytime you press the switch to lock the front doors,
you will also lock the side entrance door. Also,
when you unlock either one of the front doors, it
will unlock the side entrance door as well.
ENTRANCE DOOR LOCK
AND HANDLE
The entrance door may be opened from outside the vehicle by pulling the door handle outward. To open the door from inside, pull outward
on the door handle. When the door is locked, neither the inside nor the outside door handle can be
operated. It can be locked and unlocked from the
outside of the vehicle by inserting the key into the
lock and turning.
2-3
SECTION 2
DRIVING YOUR MOTOR HOME
Deadbolt Lock
Door Lock
To lock the door from inside, rotate the lock
levers as indicated. The deadbolt lock is for added security and should be used as a security night
lock.
Deadbolt
Press lever to separate screen door from
main entrance door
Screen Door Latch
Lubricate the locks periodically with graphite
to maintain good working condition.
Door Lock
Entrance Door Handle - Inside
CAUTION
When releasing security night lock,
be sure to retract bolt before opening
door latch to prevent drag on bolt pin.
Instruct all passengers in operation of
this door catch system as well as
emergency exit window.
DRIVER COMPARTMENT DOOR
LOCK
Consult your chassis operating guide.
ELECTRIC ENTRANCE
STEP
The power switch for the electric entrance step
is located to the left of the main entry door as you
enter the coach.
2-4
Automatic Mode (Operates with Door)
With the Power Switch in the On position the
step is in Automatic Mode. This means it will
extend and retract automatically whenever the
door is opened or closed. This is done by means
of a magnetic door switch attached to the lower
hinged edge of the screen door section of the
entrance doors. The steps will extend when the
screen door is opened, and retract when the
screen door is closed. With the power switch in
the Off position the step can be kept in the extended or retracted position as described below.
SECTION 2
DRIVING YOUR MOTOR HOME
Power Switch is On or Off. This feature is standard and is installed to prevent injury or damage
which may be caused by an extended step when
the vehicle is moving. An associated feature is
the “Last Out Feature”. This feature extends the
step when the screen door is opened after the
ignition switch has been turned to either the On
or Start position.
WARNING
Do not use steps unless it is fully
extended.
Do Not Stand on step when vehicles
ignition switch is turned to either the
“On” or “Start” position. The step
will automatically retract, which may
cause personal injury. Always
remember to retract the step before
moving the vehicle.
For additional information on the step, see the
step manufacturer’s operators manual included in
your Owners InfoCase.
SEATS
Stationary Extended Mode
To keep the step in the extended position:
• turn the Power Switch to On,
• open the screen door to extend the step,
• then turn the Power Switch to Off.
The step will now stay extended whether the
door is opened or closed. This position is normally used when parked at a campsite or whenever
people are going to be entering and exiting the
vehicle frequently.
Automatic Retraction Feature
The coach is equipped with a step retraction
feature that retracts the step automatically when
the Ignition Switch key is turned to either the On
or Start position regardless of whether the Step
The driver and co-pilot seats may be indepen-
dently adjusted to suit individual preference.
To recline the seats: Lift the reclining lever,
lean back to desired incline and release the lever.
To return to the upright position, lift the lever and
lean body forward. Allow the seat to return to the
desired position and release the lever.
2-5
SECTION 2
DRIVING YOUR MOTOR HOME
Seat Recline Lever
If your model has a dinette seat located directly behind the driver or passenger front seat,
the dinette seat back is hinged and can be folded
down to allow full use of the front seat reclining
feature. Simply remove the seat back cushion and
unlatch the bolt latches on both sides of the dinette seat as shown, then fold downard.
Seat Position Adjustment Bar
(Lift to slide foward - back)
To slide seat front-back: Lift the seat adjustment
bar and use body pressure to adjust the forwardrearward position of the driver seat. Release the
bar to lock seat in desired position.
WARNING
Do not adjust driver’s seat while vehicle is in motion.
After adjusting seat, always use body
pressure to make sure slide and
swivel locking mechanism have
engaged.
Dinette Seatback Latch
(Remove cushion and unbolt to fold down
Dinette seat fold down to allow front seat
reclining.
ARM REST ADJUSTMENT
The driver and co-pilot seat armrests may be
adjusted to rest at two different positions as
shown.
Position 1 (Normal) - This is the normal “default” position of the armrest, which is generally
used when the seat is in the upright position. If
the armrest has been lowered to position 2 and
2-6
SECTION 2
DRIVING YOUR MOTOR HOME
you want it in normal position 1, raise the armrest
until it pops outward slightly, then lower into
normal position.
Position 2 (Lowered) - Raise the armrest straight
up, then push the spring-loaded base of the armrest firmly inward against the seat. When you feel
the armrest move inward, lower it into position
while still pushing the base inward against the
seat. This position would generally be used when
the seat is reclined.
1
2
To Slide the seat: Pull up on the slide lever located on the side of the seat. Slide to desired position and release lever.
3
2
1
1. PULL TO TIGHTEN.
2. TONGUE.
3. PUSH TO RELEASE.
Adjustment: To lengthen belt, turn tongue at a
right angle to belt and pull to desired length. To
shorten, pull loose end of belt.
To Fasten: Be sure belt is not twisted. Grasp
each part of the belt assembly and push tongue
into buckle. Adjust to a snug fit by pulling the
loose end away from the tongue.
To Release: Press button in center of buckle and
slide tongue out of buckle.
WARNING
To reduce the risk of an injury in an
accident, position the lap belt tightly
and as low as possible across the pelvic area. Pregnant woman should be
especially certain to wear the lap belt
as low as possible across the pelvic
area so there is no pressure on the
abdomen.
SEAT BELTS
Seats intended for occupancy while the vehicle is in motion are equipped with seat belts for
the protection of the driver and passengers.
Lap Belts
The lap belts must be worn as low as possible
and fit snugly across the hip area. Always sit
erect and well back into the seat. To gain full protection of the safety belt, never let more than one
person use the same safety belt at any one time,
and do not let the safety belts become damaged
by pinching them in the doors or in the seat mechanism. After any serious accident, any seat belts
which were in use at the time should be replaced.
Only seats equipped with seat belts
are to be occupied while vehicle is in
motion.
Lap-Shoulder Belts
Fastening: Hold the belt just behind the
tongue using the hand nearest to the door. Next,
bring the belt across the body and slide the
tongue into the buckle until the latch engages.
Unfastening: Press the release button in the
buckle. Hold onto the tongue when you release it
from the buckle to keep it from retracting too rapidly.
When the lap-shoulder belt is in use, the lap
portion must ride across the strong hip area and
the shoulder portion must ride diagonally over
the shoulder blade toward the buckle.
2-7
SECTION 2
DRIVING YOUR MOTOR HOME
The shoulder belt is designed to lock only during a sudden stop, sudden body movement or a
collision. At all other times it will move freely
with the occupant.
WARNING
Never wear the shoulder belt in any
position other than as stated above.
Failure to do so could increase the
chance or extent of injury in a collision.
NOTE: On some models, the shoulder belt height
can be adjusted to provide the most comfortable position for each individual person’s size. To adjust shoulder belt height,
press the lever down, select the desired
position and release the lever. A ratcheting mechanism will allow the belt to be
pushed upward but not pulled downward.
Seat Belt Care and Cleaning
• Be careful not to damage the belt webbing
and hardware. Take care not to pinch them in
the seat or doors.
• Inspect the belts and hardware periodically.
Check for cuts, frays, and loose parts. Damaged parts should be replaced. Do not remove
or modify the belt system.
• Keep belts clean and dry. If the belts need
cleaning, use only a mild soap and water solution. Do not use hot water. Do not use abrasive cleaners or bleach. These products may
weaken or damage the belts.
• Replace any belt assembly that was used during a severe impact. Replace the complete assembly even if damage is not apparent.
CHILD RESTRAINTS
All 50 of the United States and the District of
Columbia now require the use of the child/infant
restraint systems for children in vehicles.
A properly installed and secured child restraint system can help reduce the chance or severity of personal injury to a child in an accident
or during a sudden maneuver. Children may be
injured in an accident if they are not seated in a
child restraint which is not properly secured.
A child restraint system is designed to be secured in a vehicle seat by a lap belt or the lap belt
portion of a lap-shoulder belt. According to accident statistics, children are also safer when properly restrained in rear seating positions than in
front seating positions.
When purchasing a child restraint system:
1. Look for the label certifying that it meets all
applicable U.S. Federal Motor Vehicle
Safety Standards (FMVSS) or, in Canada,
requirements of the Children's Car Seats and
Harnesses Regulations (CCSHR).
2. Make sure that it will attach to your vehicle
and restrain your child securely and conveniently so that you are able to install it correctly each time it is used.
3. Be certain that it is appropriate for the child's
height, weight and development. The
instructions and/or the regulation label
attached to the restraint typically provides
this information.
4. Review the instructions for installation and
use of the restraint. Be sure that you understand them fully and can install the restraint
properly and safely in your vehicle.
2-8
Loading...