Battery Care ...................................................................................................................................... 6-7
Circuit Breakers and Fuses – House 12-Volt DC ............................................................................. 6-8
7 – PLUMBING
Fresh Water System .......................................................................................................................... 7-1
Water Pump ...................................................................................................................................... 7-2
Disinfecting Your Fresh Water System ............................................................................................ 7-3
Windows ......................................................................................................................................... 12-8
Power Roof Ventilator .................................................................................................................... 12-9
Effects of Prolonged Occupancy .................................................................................................... 12-9
1-5
SECTION 1 – INTRODUCTION
Congratulations! We welcome you to the
exciting world of motor home travel and
camping. You will find it convenient and
enjoyable to have all the comforts of home and
still enjoy the great outdoors wherever you
choose to go. Your motor home has been
carefully designed, engineered, and
manufactured to provide years of enjoyment.
Before sliding into the driver’s seat, please
become familiar with operations and features. In
addition, spend some time with the dealer when
you take delivery to learn all you can about your
new motor home.
ABOUT THIS MANUAL
This operator’s manual was prepared to aid
you in the proper care and operation of the
vehicle and equipment.
Please read this manual completely to
understand how everything in your coach works
before taking it on its “maiden voyage”.
NOTE: This manual describes many features of
your motor home and includes
instructions for its safe use.
This manual, including photographs and
illustrations, is of a general nature only.
Some equipment and features described
or shown in this manual may be
optional or unavailable on your model.
Because of Winnebago Industries
continuous program of product
improvement, it is possible that recent
product changes and information may
not be included.
The instructions included in this manual
are intended as a guide, and in no way
extend the responsibilities of Winnebago
Industries beyond the standard written
warranty as presented in this manual.
The descriptions, illustrations, and
specifications in this manual were
correct at the time of printing. We reserve
the right to change specifications or
®
’
design without notice, and without
incurring obligation to install the same
on products previously manufactured.
The materials in your InfoCase contain
warranty information and operating and
maintenance instructions for the various
appliances and components in your motor home.
NOTE: Many of the instruction sheets and
manuals for the various appliances and
components have been incorporated into
the Operator’s Manual Supplement for
your convenience.
Please read the FAQ in Section 1 of the
Operator’s Manual Supplement for more
details.
Throughout this manual, frequent reference is
made to the vehicle chassis manual that is
provided by the manufacturer of the chassis on
which this motor home is built.
Consult the chassis manual for operating,
safety, and maintenance instructions pertaining
to the chassis section of the motor home.
SAFETY MESSAGES USED IN
THIS MANUAL
Throughout this manual, certain items are
labeled Danger, Warning, Caution, or Note.
These terms alert you to precautions that may
involve damage to your vehicle or a risk to your
personal safety. Read and follow them carefully.
DANGER
DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious personal injury.
5 - DASH / AUTO
1-1
SECTION 1 –
INTRODUCTION
WARNING
WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious personal injury.
CAUTION
CAUTION indicates a hazardous
situation which, if not avoided, could
result in minor or moderate personal
injury.
NOTICE
NOTICE is used to address practices not
related to personal injury.
according to your needs. Thereafter, have
alignment inspected periodically to maintain
vehicle steering performance and prevent uneven
tire wear.
SERVICE AND ASSISTANCE
Your dealer will be glad to provide any
additional information you need, as well as
answer any questions you might have about
operating the equipment in your coach. When it
comes to service, remember that your dealer
knows your vehicle best and is interested in your
satisfaction. Your dealer will provide quality
maintenance and any other assistance that you
may require during your ownership of this
vehicle.
If you need warranty repairs while traveling,
you may take your vehicle to any authorized
Winnebago Industries® dealership and request
their assistance.
See the Service Dealer Directory in your
InfoCase.
NOTE: A “Note” is not necessarily safety-
related, but indicates a recommendation
or special point of information that could
assist in understanding the use or care of
a feature item.
PRE-DELIVERY INSPECTION
This motor home has been thoroughly
inspected before shipment. Your dealer is
responsible for performing a complete predelivery inspection of the chassis and all motor
home components.
As a part of the pre-delivery inspection
procedure, the dealer is responsible for road
testing the motor home, noting, and correcting
any problems before delivery.
FRONT AXLE TIRE
ALIGNMENT
We recommend that you have the front
suspension and steering alignment checked and
adjusted after you have fully loaded the vehicle
REPORTING SAFETY DEFECTS
If you believe that your vehicle has a defect
which could cause a crash or could cause injury
or death, you should immediately inform the
National Highway Traffic Safety Administration
(NHTSA) in addition to notifying Winnebago
Industries, Inc.
If NHTSA receives similar complaints, it may
open an investigation, and if it finds that a safety
defect exists in a group of vehicles, it may order
a recall and remedy campaign. However,
NHTSA cannot become involved in individual
problems between you, your dealer, or
Winnebago Industries
To contact NHTSA, you may either call the
Vehicle Safety Hotline toll-free at:
1-888-327-4236; (TTY: 1-800-424-9153)
or go to their website at http://www.safercar.gov
or write to:
Administrator, NHTSA
1200 New Jersey Avenue S.E.
Washington, D.C. 20590
®
.
1-2
You can also obtain other information about
motor vehicle safety from the NHTSA website
at http://www.safercar.gov
OCCUPANT AND CARGO
CARRYING CAPACITY LABEL
This label is affixed in the driver’s area next to
or near the Vehicle Certification Label. It
contains vehicle occupant and cargo carrying
capacity along with the number of seat belt
positions in the vehicle. The label also provides
the weight of a full load of water and advises that
this weight, along with the tongue weight counts
as cargo.
SECTION 1 –
INTRODUCTION
If any weight exceeding 45.4 kg (100 lbs.) is
added to your coach between final vehicle
certification and first retail sale, the occupant and
cargo carrying capacity must be corrected and a
label similar to the one shown below will be
affixed inside your coach.
1-3
SECTION 1 –
INTRODUCTION
VEHICLE CERTIFICATION LABEL
This label is affixed to the lower driver side armrest panel, driver door, or the driver side door jamb,
depending on model. It contains vehicle identification numbers and other important reference information.
EXPLANATION OF DATA
1. Chassis manufacturer.
2. Chassis manufacture date.
3. Month and year of manufacture at Winnebago
Industries®.
4. Gross Vehicle Weight Rating: Total
permissible weight of the vehicle, including
driver, passengers, total cargo carried
(including all liquids), and equipped with all
options.
5. Gross Axle W eight Rating: Total permissible
weight allowed for the front and rear axles
(listed in pounds and kilograms).
6. Suitable Tire Choice: Tires recommended to
meet handling and safety requirements. When
replacing any of the tires on your vehicle,
always replace with a tire that meets these
specifications.
7. Suitable Rim Choice: Wheel rims
recommended to meet handling and safety
requirements. When replacing any of the rims
on your vehicle, always replace with a rim that
meets these specifications.
8. Cold Inflation Pressure: Inflation pressures at
Gross Axle Weight Ratings recommended
(while cold) for the tires originally equipped
on your vehicle. These pressure levels must be
maintained to assure proper handling, safety,
and fuel economy.
9. Rear Axle Wheel Configuration: Single or
Dual as it relates to the inflation.
10. Serial Number: This is the serial number
assigned to the completed vehicle by
Winnebago Industries.
11. Vehicle Identification Number (VIN): This
number identifies the chassis on which the
motor home is built. The 10th digit of the VIN
designates the chassis model year. (7=2007,
8=2008, etc.). This information is useful when
ordering chassis repair parts.
12. Type: States the NHTSA designated usage
classification for your motor home. MPV
signifies a Multi-purpose Passenger Vehicle.
13. Color: Signifies the color code number of the
decor used throughout the vehicle. This
number is necessary for ordering replacement
cushions, curtains, carpet, etc.
®
14. Winnebago
name.
15. Model: Lists the Winnebago product model
number of your vehicle.
All measurements are based upon the most recent data available. See your dealer for specifications.
1
The height of each model is measured to the top of the tallest standard feature and is based on the curb weight of a typically
equipped unit. The actual height of your vehicle may vary by several inches depending on chassis or equipment variations.
Contact your dealer for further information.
2
Floorplans feature a wide-body design - over 96". You should be aware that some states restrict access on some or all state
roads to 96" in body width. You should confirm the road usage laws in the states of interest to you.
3
The load capacity of your motor home is designated by weight, not by volume, so you cannot necessarily use all available space
when loading your motor home.
4
Capacities are based on measurements prior to tank installation. Slight capacity variations can result upon installation.
5
Capacities shown are the tank manufacturer's listed water capacity (W.C.). Actual filled propane capacity is 80% of listing due
to overfilling prevention device on tank.
6
Actual towing capacity is dependent on your particular loading and towing circumstances which includes the GVWR, GAWR,
and GCWR as well as adequate trailer brakes. Refer to the chassis operator's manual of your motor home for further towing
information.
Motor Home Model Number _________________________________________________________
Motor Home Serial Number __________________________________________________________
Chassis Vehicle Identification No. (VIN)________________________________________________
Vehicle Mileage at Delivery __________________________________________________________
Selling Dealer Name________________________________________________________________
Address __________________________________________________________________________
Company_________________________________________________________________________
Policy Number ____________________________________________________________________
Agent______________________________________________Phone ________________________
1-6
2011 NEW VEHICLE LIMITED WARRANTY
WINNEBAGO INDUSTRIES, INC.
SECTION 1 –
INTRODUCTION
WARRANTY COVERAGE TO OWNER
Winnebago Industries, Inc. of Forest City, Iowa, warrants each new
Winnebago and Itasca motor home to the owner for recreational use
in the U.S.A. and Canada as follows:
BASIC LIMITED WARRANTY
WINNEBAGO INDUSTRIES’ RESPONSIBILITY
Any part of the vehicle subject to this warranty that is found to be
defective in material or workmanship under normal use and
maintenance will be repaired or replaced at Winnebago Industries’
option without charge to the customer for parts or labor upon notice
of the defect.
WARRANTY PERIOD
The basic Warranty Period is 12 months or 15,000 miles (24,135
kilometers), on the odometer, whichever occurs first. The Warranty
Period for all coverages begins on the date the vehicle is delivered to
the first retail purchaser or first placed in service as a demonstrator
or company vehicle.
ONLY WARRANTY
This limited warranty is the only warranty made or authorized by
Winnebago Industries. Winnebago Industries makes no other
promises, representations or warranties concerning the vehicle or
other matters set forth herein. Winnebago Industries does not
authorize any person to create for it any other obligations or liability
in connection with this vehicle.
DEALER’S REPRESENTATIONS EXCLUDED
Winnebago Industries shall not be bound by any undertaking,
representation, or warranty made by any dealers selling its product
to any purchaser of its products.
EXCLUSIVE REMEDY
THE PERFORMANCE OF REPAIRS IS THE EXCLUSIVE REMEDY
UNDER THIS LIMITED WARRANTY OR ANY IMPLIED
WARRANTY. ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO
THIS VEHICLE ARISING BY WAY OF STATE LAW IS LIMITED IN
DURATION TO THE DURATION OF THIS WRITTEN WARRANTY
AS HEREINBEFORE OR HEREINAFTER PROVIDED.
LIMITATION ON LIABILITY
WINNEBAGO INDUSTRIES SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING
FROM BREACH OF THIS WRITTEN WARRANTY OR ANY
IMPLIED WARRANTY. SUCH DAMAGES INCLUDE, BUT ARE
NOT LIMITED TO, LOSS OF TIME, INCONVENIENCE, OR OTHER
CONSEQUENTIAL DAMAGE INCLUDING EXPENSE FOR
GASOLINE, TELEPHONE, TRAVEL, LODGING, LOSS OR
DAMAGE TO PERSONAL PROPERTY, OR LOSS OF REVENUE.
Some states do not allow limitations on how long an implied warranty
will last or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to
you.
ITEMS NOT SUBJECT TO WARRANTY COVERAGE
Chassis, drivetrain and related components*
Wheels*
Tires*
Any other part or component covered by a written warranty issued by
its manufacturer*
Service Items, such as Windshield Wiper Blades, Lubricants, Fluids
& Filters
Adjustments
Rust and Corrosion
*These items are covered under the manufacturer’s individual
warranty.
ADDITIONAL EQUIPMENT NOT COVERED
Winnebago Industries cannot and does not accept any responsibility
in connection with any of its motor homes for additional equipment or
accessories installed at any dealership or other place of business, or
by any other party other than Winnebago Industries. Such installation
of equipment or accessories by any other party will not be covered
by the terms of this warranty.
36 MONTH/36,000 MILE STRUCTURAL WARRANTY
At the expiration of the Basic Coverage and for the remainder of the
period of 36 months or 36,000 miles (57,924 kilometers), on the
odometer, whichever occurs first, Winnebago Industries warrants the
following:
1. Structural defects of the subfloor, floor, and slide-out room.
Floor lamination failure and lamination failure of the subfloor
panels and risers are covered by the structural warranty.
2. Body Thermo-Panel
against delamination. Body Thermo-Panel
bonding of the exterior skin and the interior paneling to an
insulating core material. Delamination (separation of layers)
caused by other factors such as physical damage or failed
sealants is not covered by this warranty.
This warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
Also, this warranty shall not apply to failures, damage or
malfunctions resulting from normal wear, misuse, abuse, negligence,
alteration, accident, fire, improper repair of the vehicle or failure to
follow recommended maintenance requirements.
OWNER’S RESPONSIBILITY-CARE AND MAINTENANCE
It is the owner’s responsibility to perform the care, maintenance and
proper load distribution described in the operator’s manual which
accompanies your motor home. Any damage which results to your
vehicle as a result of your failure to perform such duties, is not
covered.
Damage to appearance items such as fiberglass, metal, paint,
fabrics and trim, may occur during manufacturing or transporting.
Normally, any factory defect or damage is corrected at the factory. In
addition, dealers are obligated to inspect each vehicle upon delivery
to them and prior to delivery to you. You should also immediately
inspect appearance items and advise your selling dealer of any
discrepancies. Damage and deterioration due to use and exposure,
such as rust or corrosion is not covered by this warranty.
®
Lamination of the sidewalls and backwall
®
Lamination is the
1-7
SECTION 1 –
INTRODUCTION
OBTAINING WARRANTY REPAIRS
While any Winnebago Industries motor home dealer can perform
warranty service, we recommend you return to the dealership that
sold you your vehicle. If you are touring or have moved, contact any
Winnebago Industries motor home dealer in the United States or
Canada for warranty service.
If a part of the system covered by this limited warranty fails to
function or requires service during the warranty period:
1. Promptly take the vehicle to the selling dealer for repair or
inspection.
2. Written notice of defects must be given to the selling dealer and
manufacturer.
3. If the dealer is incapable of making the repairs, request that he
contact Winnebago Industries, Inc.
4. If, after the above steps are completed and the repair is not
made, the customer should contact Winnebago Industries, Inc.,
605 West Crystal Lake Road, P.O. Box 152, Forest City, Iowa
50436, Attention: Owner Relations Department (800-537-1885)
and furnish the following information:
− The complete serial number of the vehicle
− Date of retail purchase
− Selling dealer’s name
− Nature of the service problem, and a brief explanation of
the steps or service the dealer has performed, and the
results obtained. The customer may be directed to another
dealer or service center for repairs to be completed, if such
a dealer or service center is better able to complete the
repair.
Winnebago Industries may, at its option, request the vehicle be
returned to Forest City, Iowa for repair. If the customer refuses to
allow repairs to be performed at the Forest City, Iowa facility, the
warranty on that repair will be voided.
5. If after the above steps are completed and the repairs are not
satisfactory, the customer may contact the Service
Administration Manager of Winnebago Industries, and request a
customer relations board meeting to resolve the problem. This
action, however, is not mandatory.
6. Certain components are covered by warranties provided by
individual component manufacturers. Please refer to the
component’s information supplied in the vehicle’s InfoCase.
COMMENCEMENT OF ACTIONS
CALIFORNIA
Winnebago Industries participates in the Consumer Arbitration
Program for Recreation Vehicles (CAP-RV). This third-party dispute
resolution program is available, at no charge to you, to settle
unresolved warranty disputes for recreational vehicles. This dispute
resolution program reviews eligible product and service related
complaints involving warranty covered components.
To find out more about the program, or to request an
application/brochure, please call the Arbitration Administration office
toll-free 800-279-5343.
The CAP-RV program operates as a certified mechanism under the
review of the California Arbitration Certification Program. You must
utilize the arbitration program before claiming rights conferred by 15
USC section 2310 (Uniform Commercial Code) or Civil Code section
1793.22(b) (Tanner Consumer Protection Act). You are not required
to use the program if you choose to seek redress by pursuing rights
and remedies not created by those laws.
Members of the Armed Forces who purchased the vehicle in
California, or who were stationed in or a resident of California at the
time of purchase (regardless of state of purchase) or who are
stationed in California at the time of application to this program, may
utilize the CAP-RV program.
:
Any action for breach of The Basic Limited or Structural Warranty or
any implied warranty shall be commenced within one-year after
expiration of the warranty.
CHANGES IN DESIGN
Winnebago Industries, Inc. reserves the right to make changes in
design and changes or improvements upon its products without
imposing any obligation upon itself to install the same upon its
products theretofore manufactured.
NEW YORK
If your motor home has been repaired three or more times for the
same nonconformity, defect, or condition, or if your motor home has
been out of service by reason of repair for twenty-one days, Section
198-a of the General Business Law of the State of New York
requires you to provide written notice by certified mail, return receipt
requested, to Winnebago Industries or its authorized dealer before
making any claim under that section of the law. If you do have
problems with your motor home, you should provide written notice to
Winnebago Industries at the following address:
:
Winnebago Industries, Inc.
605 West Crystal Lake Road
P.O. Box 152
Forest City, Iowa 50436
Attn: Owner Relations
10/09
1-8
SECTION 2 – SAFETY AND PRECAUTIONS
GENERAL WARNINGS
•Only seats equipped with seat belts are to be
occupied while the vehicle is moving.
•Make sure all passengers have seat belts
fastened. Lap belts should fit low on the hips
and upper thighs. The shoulder belt should be
positioned snug over the shoulder.
•For pregnant women, the lap belt should be
placed under the abdomen and across the
upper thighs. The shoulder belt should be
positioned across the center of the chest.
Consult your doctor if you have any
questions.
•Child restraints should be installed properly
according to manufacturer’s instructions. See
“Child Restraints”.
•All moveable or swiveling seats should be
placed and locked in position while the
vehicle is moving.
•Never let passengers stand or kneel on seats
while the vehicle is moving.
•Sleeping facilities are not to be utilized while
vehicle is moving.
•Examine the escape window and be familiar
with its operation.
•Inspect the fire extinguisher monthly for
proper charge and operating condition. This
should also be done before beginning a
vacation or any extended trip.
•Use care when accelerating or decelerating on
a slippery surface. Abrupt speed changes can
cause skidding and loss of control.
•Never drive the vehicle with a slideout room
extended.
•Driving through water deep enough to wet the
brakes may affect stopping distance or cause
the vehicle to pull to one side. Check brake
operation in a safe area to be sure they have
not been affected. Never operate any vehicle if
a difference in braking efficiency is
noticeable.
•Adverse weather conditions and extremes in
terrain may affect handling and/or
performance of your vehicle. Refer to your
chassis manual for related information.
FUEL AND PROPANE GAS
DANGER
All pilot lights, appliances, and their
ignitors (see operating instructions)
shall be turned off before refueling of
motor fuel tanks and/or propane
containers. Failure to comply could
result in death or serious injury.
5 - DASH / AUTO
DRIVING SAFETY
•Do not attempt to adjust the driver’s seat while
the vehicle is moving.
•Do not adjust tilt steering in a moving vehicle.
•Do not operate the cruise control on icy or
extremely wet roads, winding roads, in heavy
traffic, or in any other traffic situation where
a constant speed cannot be maintained.
WARNING
Propane gas containers, gasoline, or
other flammable liquids shall not be
placed or stored onboard the vehicle
because a fire or explosion may result.
Propane gas containers are equipped
with safety valves, which relieve
excessive pressure by discharging gas
to the atmosphere. Failure to comply
could result in death or serious injury.
2-1
SECTION 2 –
SAFETY AND PRECAUTIONS
•All pilot lights must be extinguished and
appliances turned off while refilling the fuel
tank or LP gas tank.
•Never smoke while refilling vehicle fuel tank
or LP gas tank.
•Never use an open flame to test for LP gas
leaks. Replace all protective covers and caps
on LP system after filling. Make sure valve is
closed and the door is latched securely.
•Never connect natural gas to the LP gas
system.
•When lighting range burners, do not turn
burner controls to “On” and allow gas to
escape before lighting match.
•Portable fuel-burning equipment, including
wood and charcoal grills and stoves shall not
be used inside the recreational vehicle. The
use of this equipment inside the recreational
vehicle may cause fires or asphyxiation.
•LP gas regulators must always be installed
with the diaphragm vent facing downward.
Regulators are equipped with a protective
cover . Make sure that the regulator vent faces
downward and that the cover is kept in place
to minimize vent blockage, which could result
in excessive gas pressure causing fire or
explosion.
•The following warning label is located in the
cooking area to remind you to provide an
adequate supply of fresh air for combustion.
asphyxiation is greater when the appliance is
used for long periods of time. Failure to comply
could result in death or serious injury.
LP GAS LEAKS
The following procedures are located in the
vehicle near the range area. If you smell gas
within the vehicle, quickly and carefully perform
the procedures listed.
IF YOU SMELL PROPANE
•Extinguish any open flames, pilot lights, and
all smoking materials.
•Do not touch electrical switches.
•Shut off the gas supply at the tank valve(s) or
gas supply connection.
•Open doors and other ventilating openings.
•Leave the area until odor clears.
•Have the propane system checked and leakage
source corrected before using again.
Failure to comply could result in death or serious
injury.
PROPANE GAS LEAK
DETECTOR
Your coach is equipped with a propane gas
leak detector, similar to the one shown below.
The leak detector sounds an alarm if an unsafe
amount of propane gas is present inside the
coach.
Unlike homes, the amount of oxygen supply is
limited due to the size of the recreational vehicle,
and proper ventilation when using the cooking
appliance(s) avoids dangers of asphyxiation. It is
especially important that cooking appliances not
be used for comfort heating, as the danger of
2-2
Propane Gas Leak Detector
Because propane gas is heavier than air, the
leak detector is located on a cabinet face near the
floor of the coach.
WARNING
EXPLOSION HAZARD: DO NOT use an
open flame to test for gas leaks. When
testing for gas line leaks with a soapy
water solution, DO NOT use a detergent
containing ammonia or chlorine. These
substances may generate a chemical
reaction causing corrosion to gas lines,
resulting in dangerous leak conditions.
Death or serious injury can result.
Power Connection
The propane gas leak detector is powered by
the house batteries. If the house/coach battery
switch is shut off or the battery cable is
disconnected from the batteries, the alarm will
not work. The propane gas leak detector fuse or
circuit breaker is located in the 12-volt house
electrical load center.
Because the propane gas leak detector is
connected to the house battery, it is always
drawing a small amount of current. Even though
this current draw is slight, it could drain the house
battery during storage periods when the house
battery will not be charged regularly by the
engine or shoreline.
Further Information
See the manufacturer’s information in your
InfoCase for further instructions on nuisance
alarms and care and testing of the propane gas
leak detector.
SECTION 2 –
SAFETY AND PRECAUTIONS
The best protection against carbon monoxide
entry into the vehicle body is a properly
maintained engine exhaust and ventilation
system. It is recommended that the exhaust
system and body be inspected by a qualified
motor home service center:
•Each time the vehicle is serviced for an oil
change.
•Whenever a change in the sound of the
exhaust system is noticed.
•Whenever the exhaust system, underbody , or
rear of the vehicle is damaged.
To allow proper operation of the vehicle’s
ventilation system, keep front ventilation inlet
grill clear of snow, leaves, or other obstructions
at all times. DO NOT OCCUPY A PARKED
VEHICLE WITH ENGINE RUNNING FOR
AN EXTENDED PERIOD.
Do not run engine in confined areas, such as a
garage, except to move vehicle into or out of the
area.
CARBON MONOXIDE ALARM
Your coach is equipped with a carbon
monoxide (CO) alarm located on the ceiling in
the bedroom area. The CO alarm is powered by a
9-volt battery and has a sensor that is designed to
detect toxic carbon monoxide gas fumes
resulting from incomplete combustion of fuel. It
will detect CO gas from any combustion source
such as the furnace, gas range/oven, water heater,
refrigerator, chassis engine, and electric
generator engine.
Press button to test
CARBON MONOXIDE
WARNING
WARNING
Avoid inhaling exhaust gases, as they
contain carbon monoxide, which is a
colorless, odorless, and poisonous gas.
Death or serious injury can result.
Carbon Monoxide Alarm
2-3
SECTION 2 –
SAFETY AND PRECAUTIONS
WARNING
Failure to replace this product by the
“REPLACE BY DATE” printed on the
alarm cover may result in death by
Carbon Monoxide poisoning.
Replacement
When replacing this alarm, we recommend
replacing only with the same model, or with one
that is also listed for RV application. We
recommend obtaining a replacement from your
Winnebago Industries® dealer.
Further Information
Please read the information provided by the
manufacturer, which is included in your InfoCase
for further information.
SMOKE ALARM
Your motor home is equipped with a smoke
alarm located on the ceiling in the lounge area.
The smoke alarm is powered by a 9-volt battery
and has a sensor that is designed to detect smoke.
Further Information
See the manufacturer’s information in your
InfoCase for further instructions.
Replacement
When replacing this alarm, we recommend
replacing only with the same model, or with one
that is also listed for RV application. We
recommend obtaining a replacement from your
Winnebago Industries® dealer.
FIRE EXTINGUISHER
A dry chemical fire extinguisher is located
near the main entrance door.
Push button
to test
Smoke Alarm
The following label is affixed to the smoke
alarm.
2-4
Fire Extinguisher
(Typical inst alla tion - your coach may
vary according to model and floorplan)
We recommend that you become thoroughly
familiar with the operating instructions displayed
on the side of the fire extinguisher and in the
information supplied in your InfoCase.
We also recommend that you inspect the fire
extinguisher for proper charge at least once a
month in accordance with National Fire
Protection Association (NFPA)
recommendations as stated on the label.
If the charge is insufficient, the fire
extinguisher must be replaced.
SAFETY AND PRECAUTIONS
LOADING
SECTION 2 –
NOTICE
Do not test the fire extinguisher by
discharging it. Partial discharge can
cause leakage of pressure or contents,
which would render the unit inoperative
when needed. When using the fire
extinguisher , aim the spray at the base of
the fire.
Replacement
If for any reason you must replace the fire
extinguisher, the replacement must be the same
type and size as the one originally supplied in
your coach. We recommend obtaining a
replacement only from your Winnebago
Industries® dealer or a reliable RV parts supplier.
ELECTRICAL
•Careless handling of electrical components
can be fatal. Never touch or use electrical
components or appliances while feet are bare,
while hands are wet, or while standing in
water or on wet ground.
•Improper grounding of the vehicle can cause
personal injury . Do not plug the utility power
cord into an outlet which is not grounded and
do not adapt the plug to connect to a receptacle
for which it is not designed.
•Store or secure all loose items inside the motor
home before traveling. Possible overlooked
items such as canned goods or small
appliances on the countertop, cooking pans on
the range, or free-standing furniture items can
become dangerous projectiles during a
sudden stop.
•Be aware of GVWR, GAWR, and individual
load limit on each tire or set of duals (See
“Loading the Vehicle” in Section 12).
•Never load the motor home in excess of the
gross vehicle weight rating of the gross axle
weight rating for either axle.
MAINTENANCE
•Do not remove the radiator cap while engine
and radiator are still hot. Always check
coolant level visually at the see-through
coolant reservoir.
•Never get beneath a vehicle that is held up by
a jack only.
•Do not mix different construction types of
tires on the vehicle, such as radial, bias, or
belted tires, as vehicle handling may be
affected. Replace tires with exact size, type,
and load range.
EMERGENCY EXITS
•Do not attach an extension cord to the utility
power cord.
•Do not use any electrical device that has had
the ground pin removed.
•A void overloading electrical circuits. Replace
fuses or circuit breakers with those of the
same size and amperage rating only. Never
use a higher rated fuse or breaker.
•Use caution when handling or working near
electrical storage batteries. Always remove
jewelry and wear protective clothing and eye
covering. Avoid creating sparks.
Escape Window
The escape window is secured by two red
safety latches at the bottom of the window.
To open, lift both latches up and toward the
center of the window, then push outward near the
bottom of the window.
2-5
SECTION 2 –
SAFETY AND PRECAUTIONS
Escape Window - Lift latch
handles upward to open.
Using Slider Windows As
Emergency Exits
Some coaches are required to have a slider
window as an alternate exit. This window will be
marked EXIT and have a red-handled latch.
To open, pull on the red plastic strap at the
bottom of the window to remove the rubber cord
that holds the window in place. Pull on the rubber
cord until it is completely removed. This allows
the window to be pushed out.
•Pull red strap to remove black rubber window
retainer cord.
•Pull cord out completely and push window out
of rubber frame.
Use rear escape window for emergency exit
only. Do not test for proper operation. If the cord
is released by accident, but the glass remains in
place, the cord can be replaced using a blunt
instrument, preferably one made of plastic. We
recommend you contact your dealer for
assistance.
Pull latch UP to slide window open
Most slider windows along the side of any
motor home can also be used as alternate
emergency exits, should the need arise.
To use a slider windows as an exit, first slide
the window open, then either slide the screen
open or push the screen material out, depending
on window construction.
Rear Escape Window
Some models may have a push-out rear escape
window on the backwall of the coach.
POWER SOFAS AND BEDS
WARNING
Keep people away from operating
mechanism and pinch hazard areas
during use. Failure to do so could cause
injury.
2-6
SLIDEOUT ROOMS
WARNING
Your motor home may have more than
one slideout room. Understand which
switch operates which slideout room prior
to operation. Make sure all slideout rooms
are clear of people who could be harmed
or obstacles that could cause damage
prior to operating any slideout rooms.
Failure to observe can result in death or
serious injury.
Check inside and outside the vehicle to make
sure that there are no people who could be
harmed or obstacles that could cause damage due
to room activation.
WARNING
Keep all persons clear of the slideout
room and moving parts while extending or
retracting. Do not occupy the slideout
room while it is being extended or
retracted. Failure to observe can result in
death or serious injury.
FORMALDEHYDE
INFORMATION
Some of the materials used in this recreational
vehicle emit formaldehyde. Eye, nose, and throat
irritation, headache, nausea, and a variety of
asthma-like symptoms, including shortness of
breath have been reported as a result of
formaldehyde exposure. Reaction to
formaldehyde exposure may vary among
individuals. Elderly persons and young children,
as well as anyone with a history of asthma,
allergies, or lung problems may be at greater risk.
Research is continuing on the possible long-term
effects of exposure to formaldehyde. Inadequate
ventilation may allow formaldehyde and other
SECTION 2 –
SAFETY AND PRECAUTIONS
contaminants to accumulate in indoor air.
Ventilation to dilute the indoor air may be
obtained from a passive or mechanical
ventilation system. Always be sure to thoroughly
ventilate your recreational vehicle before and
during each use. High indoor temperatures and
humidity may raise formaldehyde levels. When a
recreational vehicle is in areas subject to high
temperatures, an air conditioning system can be
used to control indoor temperature levels. If you
have any questions regarding the health effects of
formaldehyde, consult your doctor or local health
department.
MOLD, MOISTURE, AND YOUR
MOTOR HOME
What is Mold?
Molds are part of the natural environment.
They are as old as the Earth itself and mold
spores are almost everywhere at some level
waiting to grow. Mold plays a part of nature by
breaking down dead organic matter, such as
fallen leaves and dead trees. Indoors however,
mold growth should be avoided. Molds
reproduce by means of tiny spores. Those spores
are invisible to the naked eye and float
throughout the outdoor and indoor air. Because
of the nature of the use of a motor home, it is
natural for a motor home to be introduced into an
environment with mold spores.
Mold is a plant and requires its own special
environment to grow. That environment includes
organic materials, nutrients, moisture, and proper
temperature.
How Can I Avoid Mold?
To reduce the ability for mold to grow, you
must reduce what constitutes its growth
environment. Mold can grow with the smallest of
a nutrient base. Just small amounts of dirt or dust
on the carpet can be enough to allow the mold
process to begin. Keep the environment as clean
as possible. Vacuum the carpet. Clean food spills
thoroughly and quickly. Avoid grease buildup
near the stove or sink. Clean the exhaust fan
above the stove often.
2-7
SECTION 2 –
SAFETY AND PRECAUTIONS
Minimize moisture in your motor home and
keep humidity low. Clean spills quickly. Do not
allow condensation to build up. You can open
windows and vents to minimize condensation.
Use of the air conditioner can assist in removing
moisture from the air. Avoid leaks, but if leaks do
occur, make repairs promptly.
Avoid bringing mold into your motor home.
Plants, cloths, books, and other household items
may already have mold present. It is easy to
transfer mold into your motor home
environment.
Monitor your motor home. Periodically check
those hidden areas in corners, closets, and
cabinets to assure mold is not present.
What if I Find Mold?
If mold develops, clean the area with a
concentrate of soap and bleach. Items that
contain mold that cannot be cleaned should be
removed from the vehicle.
Can Mold Harm Me?
The effects of mold and airborne mold spores
may cause irritation to some people. Experts
disagree on the level of exposure that may cause
health concerns.
If Mold Is Present, What Will
®
Winnebago Industries
If Winnebago Industries determines that mold
is present in the Winnebago
home as a result of a manufacturing defect
reported to Winnebago Industries within the
limited warranty period, Winnebago will clean
the affected area(s) and/or replace affected items
as it deems necessary. This is the extent of
coverage provided by Winnebago Industries.
Winnebago Industries, however, will not assume
responsibility for mold deemed to be a result of a
motor home users lack of timely and appropriate
action to mitigate circumstances should a
problem occur.
If Winnebago Industries determines that mold
is present due to conditions it determines is not a
result of a manufacturing defect found within the
Do?
®
/Itasca® motor
warranty period, Winnebago Industries will not
provide any financial assistance to the repair of
the condition.
ROOF AND LADDERS
WARNING
Stay off roof. Roof surface may be
slippery. Falling could result in death or
serious injury.
The ladder on your motor home is provided
for limited access to the roof.
Walking or working on the roof should be left
to qualified service personnel using proper safety
equipment in a safe environment. You should
only walk or work on the roof if you are qualified
and have created a safe environment.
For your safety, it is not recommended that
you store or carry items on the roof.
Before Using the Ladder
•Inspect the ladder to make sure it is not
damaged. Never use a damaged ladder.
•Keep the rungs of the ladder clean and dry
while in use. Never use the ladder when it is
raining, snowing, or icy. The rungs can
become slippery . Do not step onto the rungs if
the rungs are wet, or if your shoes are wet or
carry mud or debris that could result in a loss
of footing.
•Never ignore warning labels or weight limits
defined on your ladder. The following
warning label is located on or near the ladder:
WARNING
Do not exceed 225-lb. maximum weight capacity.
Misuse of ladder could result in death or serious injury.
See Operators Manual before using ladder.
•Maximum Capacity: 225 lbs.
•Do not overload. Ladder is intended for one
person.
2-8
SECTION 2 –
SAFETY AND PRECAUTIONS
•Make sure you are physically capable to
safely use the ladder . Strength, flexibility , and
stability are required.
•Be aware that the vehicle may sway as you
climb the ladder . Do not use the ladder in high
winds.
•As you climb the ladder, grasp the side rails
firmly and always use both hands. Keep your
body centered between the side rails. Do not
over-reach.
•Never allow children on the ladder.
•Do not transport items anchored to the
ladder. You could damage the ladder.
ROADSIDE EMERGENCY
Because of the size and weight of this vehicle
and its tires, and the possible complications
involved in tire changing, we strongly advise
obtaining professional road service to change a
flat tire whenever possible. However, if an
emergency requires you to change the tire
yourself, please exercise extreme caution and
read all tire changing information in the chassis
manual.
Never get beneath a vehicle that is held up by
a jack only.
•Let the vehicle coast to a stop, gently steering
to a safe stopping place off the traffic lanes of
the road. Do not worry about damaging the
tire or wheel rim by driving on it. A tire or
wheel replacement is cheaper than damaging
the vehicle or injuring yourself.
•When you have come to a stop, activate your
hazard flashers to warn other motorists, then
exit the vehicle carefully.
•Set out flares or other warning devices.
Check your tires for proper inflation before
each trip and at least once a month with an
accurate tire gauge.
Spare Tire Storage
If your coach is supplied with a spare tire, it
may be fastened to the backwall of the coach or
inside a rear storage compartment.
Some models, however, may have a swingdown spare tire carrier beneath the rear of the
coach. Please follow all safety warnings and
instructions for removing spare tire from the
carrier.
Swing-Down Carrier (if equipped)
If You Get A Flat Tire
•DO NOT panic.
•Grip the steering wheel firmly and steer the
vehicle as straight as possible. Avoid quick
maneuvers. You may need to counter-steer to
compensate for “pull” created by the failed
tire.
•DO NOT stomp on the brake. This abruptly
shifts the vehicle’s weight forward, making it
nose-dive and pull toward the blown-out side.
•DO NOT jerk your foot off the accelerator.
Just ease back on the accelerator slowly and
gently to continue momentum. The deflated
tire will slow the vehicle.
•If you must change lanes to get to a safe
stopping place, use your signals to warn other
motorists and change lanes smoothly and
carefully after you are certain the lane is clear .
CAUTION
Do not lie beneath tire carrier while
removing tire. The tire can fall and injury
can occur.
•Support tire carrier with a jack or block while
removing wire pin and wing nut from bolt at
front of carrier.
•Carefully lower tire carrier to ground.
•Remove 2 bolts and retainer plate that hold
wheel to carrier bracket.
•Lift or slide tire from carrier.
•Do not over-tighten wing nut when returning
carrier to storage position.
2-9
SECTION 2 –
SAFETY AND PRECAUTIONS
Recovery Towing
When calling a professional towing service,
we recommend that you advise them of your
coach length and approximate front axle weight
listed on your Vehicle Certification Label. This
will allow the towing operator to determine the
proper towing equipment to use.
We recommend that you ask for an underlift
(wheel lift or frame lift) type towing assembly for
safe towing.
Winnebago Industries® does not assume
responsibility for damage incurred while towing
this vehicle.
NOTE: Consult the chassis manual for any
additional towing instructions or
precautions provided by the chassis
manufacturer.
NOTICE
Do not attempt to push start this vehicle.
Damage to the transmission or other
parts of the vehicle will occur.
ENGINE OVERHEAT
If you see or hear steam escaping from the
engine compartment or have any other reason to
suspect an extreme engine overheating condition,
pull the vehicle over to the roadside as soon as it
is safe to do so, stop the engine, and get all
passengers out of the vehicle.
NOTICE
Do not lift on bumper . Dama ge will result
to front end body parts.
WARNING
Stay out from beneath the motor home
while it is suspended by the towing
assembly. Do not allow passengers to
occupy a towed vehicle. Death or serious
injury can result.
JUMP STARTING
If your coach will not start from the chassis
battery, try using the battery boost switch to
divert power from the house batteries to the
starter. (See either “Battery Boost Switch” or
“Aux Start Switch”).
If you wish to try jump starting the engine
using another vehicle or booster system, see your
chassis manual for connecting jumper cables to
the automotive electrical system.
NOTICE
Operating a vehicle under a severe
overheating condition can result in
damage to the vehicle.
For information on what to do in case of
overheating, consult your chassis manual.
2-10
SECTION 3 – DRIVING YOUR MOTOR HOME
The information in this section refers only to
features installed or adapted to the dash and
driver compartment area by Winnebago
Industries®. It also includes passenger seating in
the living area of the coach.
Further Information
See the chassis manual in your InfoCase for
all original chassis related controls,
instrumentation, switches, and other features.
This includes items such as cruise control,
climate controls, gauges, wipers, lights, front
seats, and three-point safety belts, etc.
SEATS – DRIVER/CO-PILOT
The driver and co-pilot seats may be
independently adjusted to suit individual
preference.
Folding Dinette Seat Back
•Remove dinette seat backrest cushion
•Unfasten bolt latch at aisle side of seat
Further Information
See the chassis manual in your InfoCase for
instructions on seat adjustments.
FOLD-DOWN DINETTE SEAT
(Models without front slideout and with
dinette seat directly behind driver or
passenger front seat)
On some models, the dinette seat located
directly behind the driver or passenger front seat
must be folded down to allow front seat reclining.
•Fold dinette seat backrest down to
recline front seat
T ypical view - your coach may vary accor ding to
model and floorplan.
SEAT BELTS
Seats intended for occupancy while the
vehicle is in motion are equipped with seat belts
for the protection of the driver and passengers.
5 - DASH / AUTO
Lap Belts
The lap belts must be worn as low as possible
and fit snugly across the hip area. Always sit
erect and well back into the seat. To gain full
3-1
SECTION 3 –
DRIVING YOUR MOTOR HOME
protection of the safety belt, never let more than
one person use the same safety belt at any one
time, and do not let the safety belts become
damaged by pinching them in the doors or in the
seat mechanism. After any serious accident, any
seat belts which were in use at the time must be
inspected and replaced if necessary.
1- Insert tab into buckle
slot until it “clicks” and is
locked
3- Press to
release
2- Pull strap to tighten
Adjustment:
To lengthen belt, swivel the tab end at a right
angle to belt and pull strap to desired length. To
shorten, pull loose end of belt.
Lap/Shoulder Belts
See your chassis manual for instructions on
proper fastening, adjustment, and releasing of
lap/shoulder belts.
Seat Belt Care and Cleaning
•Be careful not to damage the belt webbing and
hardware. Take care not to pinch them in the
seat or doors.
•Inspect the belts and hardware periodically.
Check for cuts, frays, and loose parts.
Damaged parts should be replaced. Do not
remove or modify the belt system.
•Keep belts clean and dry. If the belts need
cleaning, use only a mild soap and water
solution. Do not use hot water. Do not use
abrasive cleaners, bleach, or dyes. These
products may weaken the belts.
•Replace any belt assembly that was used
during a severe impact. Replace the complete
assembly even if damage is not apparent.
To Fasten:
Be sure belt is not twisted. Grasp each part of
the belt assembly and push tongue into buckle.
Adjust to a snug fit by pulling the loose end away
from the tongue.
To Release:
Press button in center of buckle and slide
tongue out of buckle.
WARNING
Snug and low belt positions are essential.
This will ensure that the force exerted by
the lap belt in a collision is spread over the
strong hip area and not across the
abdomen, which could result in serious
injury.
Only seats equipped with seat belts are to
be occupied while vehicle is in motion.
CHILD RESTRAINTS
-If Equipped
A properly installed and secured child
restraint system can help reduce the chance or
severity of personal injury to a child in an
accident or during a sudden maneuver. Children
may have a greater chance of being injured in an
accident if they are seated in a child restraint
system which is not properly secured.
A child restraint system is designed to be
secured in a vehicle seat by a lap belt or the lap
belt portion of a lap-shoulder belt.
When purchasing a child restraint system,
follow these guidelines:
1. Look for the label certifying that it meets all
applicable safety standards.
2. Make sure that it will attach to your vehicle
and restrain your child securely and
conveniently so that you are able to install it
correctly each time it is used.
3-2
SECTION 3 –
DRIVING YOUR MOTOR HOME
3. Be certain that it is appropriate for the child's
height, weight, and development. The
instructions and/or the regulation label
attached to the restraint typically provides this
information.
4. Review the instructions for installation and
use of the restraint. Be sure that you
understand them fully and can install the
restraint properly and safely in your vehicle.
Tether Anchor Loop
-If Equipped
If your coach has a dinette, it may be equipped
with a child seat tether anchor loop located on the
floor directly behind the forward facing dinette
seat.
Tether Anchor Loop
Further Information
See the child seat manufacturer’s specific
instructions for proper attachment and
adjustment of the tether and seat belts.
KEYS
Your motor home is supplied with several
keys. In addition to the chassis manufacturer’s
ignition key, you receive keys for the entrance
door and exterior compartment doors.
Keys have an identification number, either a
small metal tag or stamped into the key head.
These numbers are recorded on the vehicle’s
component model/serial sheet, which is included
in your InfoCase. In case keys are lost or stolen,
your dealer or a locksmith can provide you with
duplicate keys or modify the locks.
HAZARD WARNING FLASHERS
The hazard warning flashers provide
additional safety when the vehicle must be
stopped on the side of the roadway and presents a
possible hazard to other motorists. When the
flashers are on, it serves as a warning to other
drivers.
NOTE: The dinette table must be in the lowered
position when a child seat is in use.
1
3
2
1. Lower the dinette table.
2. Route the tether over the top of the dinette seat
back and hook it to the anchor loop on the floor .
3. Fasten the lap belt.
Further Information
See your chassis manual for instructions on
activating, operating, and canceling hazard
warning flashers.
MIRRORS – POWER SIDEVIEW
EXTERIOR
–If Equipped
Always adjust mirrors for maximum rear
visibility before driving off. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
The mirrors may also contain heating
elements to de-fog or de-ice the mirror glass
during cold weather operation. An ON-OFF
switch for the mirror heaters is located near the
remote mirror controls.
The ignition switch must be on to operate
mirror controls and heaters.
3-3
SECTION 3 –
DRIVING YOUR MOTOR HOME
Mirror Heat
Switch
Mirror Adjustment Control
• Mirror surface tilts in direction
of arrow button pressed.
• Middle switch selects L or R
mirror to adjust.
• Center position is “neutral” to
disable arrow buttons and
prevent misadjustment of
mirrors.
The mirrors can be folded back
against the cab doors if needed.
Mirror Head Adjustment
If you cannot adjust a mirror properly using
the control switch, the mirror may need a coarse
adjustment by rotating the mirror head.
Mirror Pivot Lock
Unscrew protective cap and
loosen Allen head set screw
Allen Head Set Screw*
MIRRORS – POWER SIDEVIEW
EXTERIOR
–If Equipped
Always adjust mirrors for maximum rear
visibility before driving off. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
The mirrors may also contain heating
elements to de-fog or de-ice the mirror glass
during cold weather operation. An ON-OFF
switch for the mirror heaters is located near the
remote mirror controls.
The ignition switch must be on to operate
mirror controls and heaters.
3-4
Mirror Heat
Mirror Adjustment Control
• Mirror surface tilts in direction
of arrow button pressed.
• Middle switch selects L or R
mirror to adjust.
• Center position is “neutral” to
disable arrow buttons and
prevent misadjustment of
mirrors.
SECTION 3 –
DRIVING YOUR MOTOR HOME
Press and Hold the Battery Boost switch in the
ON position while turning ignition key for
emergency starting power.
Switch
NOTE: The House/Coach Battery Disconnect
switch near the entrance door must be
ON and house batteries must be
sufficiently charged for this feature to
work.
Battery Boost Switch
(Typical View - depending on model)
•If chassis battery is discharged, press and hold
while turning ignition key for emergency starting
power.
The mirrors can be folded back
against the cab doors if needed.
Mirror Head Adjustment
If you cannot adjust a mirror properly using
the control switch, the mirror may need a coarse
adjustment by rotating the mirror head.
BATTERY BOOST SWITCH
The Battery Boost switch can be used to draw
emergency starting power from the house
batteries to start the engine if the chassis battery
is discharged.
AIR CONDITIONER/HEATER –
AUTOMOTIVE (DASH)
See your chassis manual for operating
information on driver and passenger comfort
controls – air conditioner, heater, defroster, and
ventilation.
NOTE: The dash air conditioner is not designed
to cool the entire interior of the coach,
but is intended only to provide cooling
for the cab area.
RADIO IN-DASH/REARVIEW
MONITOR SYSTEM
–If Equipped
The rearview camera monitor system lets you
see what is directly behind your coach for safety
and maneuvering assistance. The viewing screen
is integrated into the dash.
The monitor screen “wakes up” automatically
when transmission is shifted into reverse. A
microphone built into the rear camera lets you
hear warning sounds or verbal directions from an
assistant.
3-5
SECTION 3 –
DRIVING YOUR MOTOR HOME
Basic Operating Instructions
•POWER ON/OFF - Push
to turn ON or OFF. Push
and hold to turn screen OFF .
Touch screen to turn back
ON.
•MENU - Press to access USER SETTING
MENU. Press and hold access SYSTEM
SETUP MENU.
•AUDIO - Press and hold access AUDIO
MENU. Press to return to current playback
mode.
•CAM - Press to access CAMERA mode.
Press and hold access CAMERA SETTINGS
MENU.
•MUTE - Press to MUTE audio.
Satellite Radio
–If Equipped
Your coach may be equipped with a Sirius®
satellite radio receiver that plays through your
radio.
See the receiver manufacturer’s information
in your InfoCase for programming and operating
instructions.
NOTE:If your Sirius tuner is not activated,
follow the instructions in the radio
owners manual in your InfoCase for the
phone number to call and procedure to
access the Sirius Tuner ID Number
(ESN).
iPod Cable
-If Equipped
Your coach is equipped with a cable to
connect your iPod to play through your radio.
This cable is in the motorcover beverage tray.
See following photo.
•EJECT - Press to EJECT
CD.
•DAY/NIGHT - Press to
switch between stored
DAY/NIGHT user settings.
Press and hold to access
AUTO DAY/NIGHT adjust.
•AUX IN - Connect portable
audio player.
•USB - Connect a USB Jump
Drive. NOT FOR IPOD
CONTROLS.
3-6
-Typical View
See the manufacturer’s information in your
InfoCase for operating instructions.
Further Information
See the rearview monitor reference guide
provided in your InfoCase for specific
instructions provided by manufacturer.
Loading...
+ 100 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.