Refrigerator Service Access Compartment ....................................................................................... 4-4
Refrigerator Service Access Compartment ....................................................................................... 4-5
Range Top ......................................................................................................................................... 4-6
Range Top ......................................................................................................................................... 4-7
Awning – Power ........................................................................................................................... 12-10
Effects of Prolonged Occupancy .................................................................................................. 12-11
SECTION 1 – INTRODUCTION
DANGER
Congratulations! We welcome you to the
exciting world of motorhome travel and
camping. You will find it convenient and
enjoyable to have all the comforts of home and
still enjoy the great outdoors wherever you
choose to go.
Before sliding into the driver’s seat, please
become familiar with operations and features. In
addition, spend some time with the dealer when
you take delivery to learn all you can about your
new motorhome.
ABOUT THIS MANUAL
This operator’s manual was prepared to aid
you in the proper care and operation of the
vehicle and equipment.
Please read this manual completely to
understand how everything in your coach works
before taking it on its “maiden voyage”. In
addition, please become familiar with the New
Vehicle Limited Warranty.
NOTE: This manual describes many features of
your motorhome and includes
instructions for its safe use.
This manual, including photographs and
illustrations, is of a general nature only.
Some equipment and features described
or shown in this manual may be
optional or unavailable on your model.
Because of Winnebago Industries
continuous program of product
improvement, it is possible that recent
product changes and information may
not be included.
The instructions included in this manual
are intended as a guide, and in no way
extend the responsibilities of Winnebago
Industries beyond the standard written
warranty as presented in this manual.
The descriptions, illustrations, and
specifications in this manual were
correct at the time of printing. We reserve
the right to change specifications or
®
’
design without notice, and without
incurring obligation to install the same
on products previously manufactured.
The materials in your InfoCase contain
warranty information and operating and
maintenance instructions for the various
appliances and components in your motorhome.
NOTE: Many of the instruction sheets and
manuals for the various appliances and
components have been incorporated into
the Operator’s Manual Supplement for
your convenience.
Please read the FAQ in Section 1 of the
Operator’s Manual Supplement for more
details.
Throughout this manual, frequent reference is
made to the vehicle chassis manual that is
provided by the manufacturer of the chassis on
which this motorhome is built.
Consult the chassis manual for operating,
safety, and maintenance instructions pertaining
to the chassis section of the motorhome.
SAFETY MESSAGES USED IN
THIS MANUAL
Throughout this manual, certain items are
labeled Danger, Warning, Caution, Notice, or
Note. These terms alert you to precautions that
may involve damage to your vehicle or a risk to
your personal safety. Read and follow them
carefully.
DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious personal injury.
5 - DASH / AUTO
1-1
SECTION 1 –
WARNING
CAUTION
INTRODUCTION
WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious personal injury.
CAUTION indicates a hazardous
situation which, if not avoided, could
result in minor or moderate personal
injury.
BEFORE DRIVING
Familiarize yourself with State/Province and
local regulations before traveling. There are
many local rules that may impact your RV
travels.
FRONT AXLE TIRE
ALIGNMENT
We recommend that you have the front
suspension and steering alignment checked and
adjusted after you have fully loaded the vehicle
according to your needs. Thereafter, have
alignment inspected periodically to maintain
vehicle steering performance and prevent uneven
tire wear.
NOTICE
NOTICE is used to address practices not
related to personal injury.
NOTE: A “Note” is not necessarily safety-
related, but indicates a recommendation
or special point of information that could
assist in understanding the use or care of
a feature item.
PRE-DELIVERY INSPECTION
This motorhome has been thoroughly
inspected before shipment. Your dealer is
responsible for performing a complete predelivery inspection of the chassis and all
motorhome components.
As a part of the pre-delivery inspection
procedure, the dealer is responsible for road
testing the motorhome, noting, and correcting
any problems before delivery.
SERVICE AND ASSISTANCE
Your dealer will be glad to provide any
additional information you need, as well as
answer any questions you might have about
operating the equipment in your coach. When it
comes to service, remember that your dealer
knows your vehicle best and is interested in your
satisfaction. Your dealer will provide quality
maintenance and any other assistance that you
may require during your ownership of this
vehicle.
If you need warranty repairs while traveling,
you may take your vehicle to any authorized
Winnebago Industries® dealership and request
their assistance.
See the Service Dealer Directory in your
InfoCase.
REPORTING SAFETY DEFECTS
If you believe that your vehicle has a defect
which could cause a crash or could cause injury
or death, you should immediately inform the
National Highway Traffic Safety Administration
(NHTSA) in addition to notifying Winnebago
Industries, Inc.
If NHTSA receives similar complaints, it may
open an investigation, and if it finds that a safety
defect exists in a group of vehicles, it may order
1-2
a recall and remedy campaign. However,
NHTSA cannot become involved in individual
problems between you, your dealer, or
Winnebago Industries®.
To contact NHTSA, you may either call the
Vehicle Safety Hotline toll-free at:
1-888-327-4236; (TTY: 1-800-424-9153)
or go to their website at http://www.safercar.gov
or write to:
Administrator, NHTSA
1200 New Jersey Avenue S.E.
Washington, D.C. 20590
You can also obtain other information about
motor vehicle safety from the NHTSA website
at http://www.safercar.gov
SECTION 1 –
INTRODUCTION
OCCUPANT AND CARGO
CARRYING CAPACITY LABEL
This label is affixed in the driver’s area next to
or near the Vehicle Certification Label. It
contains vehicle occupant and cargo carrying
capacity along with the number of seat belt
positions in the vehicle. The label also provides
the weight of a full load of water and advises that
this weight, along with the tongue weight counts
as cargo.
If any weight exceeding 45.4 kg (100 lbs.) is
added to your coach between final vehicle
certification and first retail sale, the occupant and
cargo carrying capacity must be corrected and a
label similar to the one shown below will be
affixed inside your coach.
1-3
SECTION 1 –
INTRODUCTION
VEHICLE CERTIFICATION LABEL
This label is affixed to the lower driver side armrest panel, driver door, or the driver side door jamb,
depending on model. It contains vehicle identification numbers and other important reference information.
EXPLANATION OF DATA
1. Chassis manufacturer.
2. Chassis manufacture date.
3. Month and year of manufacture at Winnebago
Industries®.
4. Gross Vehicle Weight Rating: Total
permissible weight of the vehicle, including
driver, passengers, total cargo carried
(including all liquids), and equipped with all
options.
5. Gross Axle W eight Rating: Total permissible
weight allowed for the front and rear axles
(listed in pounds and kilograms).
6. Suitable Tire Choice: Tires recommended to
meet handling and safety requirements. When
replacing any of the tires on your vehicle,
always replace with a tire that meets these
specifications.
7. Suitable Rim Choice: Wheel rims
recommended to meet handling and safety
requirements. When replacing any of the rims
on your vehicle, always replace with a rim that
meets these specifications.
8. Cold Inflation Pressure: Inflation pressures at
Gross Axle Weight Ratings recommended
(while cold) for the tires originally equipped
on your vehicle. These pressure levels must be
maintained to assure proper handling, safety,
and fuel economy.
9. Rear Axle Wheel Configuration: Single or
Dual as it relates to the inflation.
10. Serial Number: This is the serial number
assigned to the completed vehicle by
Winnebago Industries.
11. Vehicle Identification Number (VIN): This
number identifies the chassis on which the
motorhome is built. The 10th digit of the VIN
designates the chassis model year (E=2014,
F=2015, G=2016, etc.). This information is
useful when ordering chassis repair parts.
12. Type: States the NHTSA designated usage
classification for your motorhome. MPV
signifies a Multi-purpose Passenger Vehicle.
13. Color: Signifies the color code number of the
decor used throughout the vehicle. This
number is necessary for ordering replacement
cushions, curtains, carpet, etc.
®
14. Winnebago
model year and series/family
name.
15. Model: Lists the Winnebago product model
number of your vehicle.
Actual towing capacity is dependent on your particular loading and towing circumstances which includes the GVWR, GAWR,
and GCWR as well as adequate trailer brakes. Refer to the chassis operator's manual of your motor home for further towing
information.
All information is based upon the most recent data available. Visit the Winnebago Industries, Inc. web page –
www.winnebagoind.com – for the most current product information.
1
The height of each model is measured to the top of the tallest standard feature and is based on the curb weight of a typically
equipped unit. The actual height of your vehicle may vary by several inches depending on chassis or equipment variations.
Contact your dealer for further information.
2
Capacities are based on measurements prior to tank installation. Slight capacity variations can result upon installation.
3
Capacities shown are the tank manufacturer's listed water capacity (W.C.). Actual filled propane capacity is 80% of listing due
to overfilling prevention device on tank.
Company_________________________________________________________________________
Policy Number ____________________________________________________________________
Agent______________________________________________Phone ________________________
1-6
SECTION 2 – SAFETY AND PRECAUTIONS
WARNING
GENERAL WARNINGS
•Only seats equipped with seat belts are to be
occupied while the vehicle is moving.
•Make sure all passengers have seat belts
fastened. Lap belts should fit low on the hips
and upper thighs. The shoulder belt should be
positioned snug over the shoulder.
•For pregnant women: Never place the
shoulder belt behind your back or under your
arm. Adjust the lap belt across your hips/
pelvis, and below your belly. Place the
shoulder belt across your chest (between your
breasts) and away from your neck.
•Child restraints should be installed properly
according to manufacturer’s instructions. See
“Child Restraints”.
•All moveable or swiveling seats should be
placed and locked in travel position while the
vehicle is moving.
•Never let passengers stand or kneel on seats
while the vehicle is moving.
•Sleeping facilities are not to be utilized while
vehicle is moving.
•Examine the escape window and be familiar
with its operation.
•Inspect the fire extinguisher monthly for
proper charge and operating condition. This
should also be done before beginning a
vacation or any extended trip.
DRIVING SAFETY
This motorhome has been designed,
manufactured and tested with concern for
the protection of it’s occupants. We
recommend you perform the following
inspections for your safety and the safety
of your passengers before starting your
vehicle.
1. LP GAS SYSTEM - Turn off at tank for
traveling. Test for leaks upon arrival at
destination before lighting pilots.
2. WHEELS - Inspect for damage and check
lug nuts for tightness.
3. TIRES - Inspect for wear and damage
and check for recommended air
pressure.
4. LIGHTING - Test for proper operation of
all interior and exterior lights including
dash lights, headlights, tail lights, brake
lights, clearance lights, and turn signals.
5. EXITS - Inspect release mechanism on
emergency exit window, test both locks
on main entrance door for ease of
operation and instruct passengers how to
use both means of exit.
6. SEAT BELTS - Direct passengers to
designated seats, be certain swivel seats
are locked into position, and require use
of a seat belt. See operator’s manual for
occupancy and weight restrictions.
7. APPLIANCES - Turn off and latch or lock
doors where provided.
8. LOOSE PARCELS - Store securely.
9. UTILITY SUPPL Y LINES - Disconnect all
electrical, sewer and water lines and
secure properly.
10. ENTRANCE DOOR STEP - Assure step
is in retracted position for traveling.
Read your motorhome and chassis
owner’s manual for further precautions.
5 - DASH / AUTO
•Do not attempt to adjust the driver’s seat while
the vehicle is moving.
2-1
SECTION 2 –
DANGER
WARNING
SAFETY AND PRECAUTIONS
•Do not adjust tilt steering in a moving vehicle.
•Do not operate the cruise control on icy or
extremely wet roads, winding roads, in heavy
traffic, or in any other traffic situation where
a constant speed cannot be maintained.
•Use care when accelerating or decelerating on
a slippery surface. Abrupt speed changes can
cause skidding and loss of control.
•Never drive the vehicle with a slideout room
extended.
•Driving through water deep enough to wet the
brakes may affect stopping distance or cause
the vehicle to pull to one side. Check brake
operation in a safe area to be sure they have
not been affected. Never operate any vehicle if
a difference in braking efficiency is
noticeable.
•Adverse weather conditions and extremes in
terrain may affect handling and/or
performance of your vehicle. Refer to your
chassis manual for complete and related
information on driving your vehicle.
FUEL AND PROPANE GAS
All pilot lights, appliances, and their
ignitors (see operating instructions)
shall be turned off before refueling of
motor fuel tanks and/or propane
containers. Can cause ignition of
flammable vapors, which can lead to a
fire or explosion and result in death or
serious injury.
Propane gas containers, gasoline, or
other flammable liquids shall not be
placed or stored onboard the vehicle
because a fire or explosion may result.
Propane gas containers are equipped
with safety valves, which relieve
excessive pressure by discharging gas
to the atmosphere. Failure to comply
could result in death or serious injury.
•All pilot lights must be extinguished and
appliances turned off while refilling the fuel
tank or propane gas tank.
•Never smoke while refilling vehicle fuel tank
or propane gas tank.
•Never use an open flame to test for propane
gas leaks. Replace all protective covers and
caps on propane system after filling. Make
sure valve is closed and the door is latched
securely.
•Never connect natural gas to the propane gas
system.
•When lighting range burners, do not turn
burner controls to “On” and allow gas to
escape before lighting match.
•Portable fuel-burning equipment, including
wood and charcoal grills and stoves shall not
be used inside the recreational vehicle. The
use of this equipment inside the recreational
vehicle may cause fires or asphyxiation.
•Propane gas regulators must always be
installed with the diaphragm vent facing
downward. Regulators are equipped with a
protective cover. Make sure that the regulator
vent faces downward and that the cover is kept
in place to minimize vent blockage, which
could result in excessive gas pressure causing
fire or explosion.
2-2
•The following warning label is located in the
cooking area to remind you to provide an
adequate supply of fresh air for combustion.
SECTION 2 –
DANGER
WARNING
DANGER
Propane Gas Leak Detector
SAFETY AND PRECAUTIONS
Do not use gas cooking appliances for
comfort heating. Can lead to carbon
monoxide poisoning, which can lead to
death or serious injury.
Gas cooking appliances need fresh air for
safe operation.
Before operating:
Open vents or windows slightly or turn on
exhaust fan prior to using cooking
appliance. Gas flames consume oxygen,
which should be replaced to ensure
proper combustion. Improper use can
result in death or serious injury.
Unlike homes, the amount of oxygen supply is
limited due to the size of the recreational vehicle,
and proper ventilation when using the cooking
appliance(s) avoids dangers of asphyxiation. It is
especially important that cooking appliances not
be used for comfort heating, as the danger of
asphyxiation is greater when the appliance is
used for long periods of time. Failure to comply
could result in death or serious injury.
IF YOU SMELL PROPANE
1. Extinguish any open flames and all
smoking materials.
2. Shut off the propane supply at the
container valve(s) or propane supply
connection.
3. Do not touch electrical switches.
4. Open doors and other ventilating
openings.
5. Leave the area until odor clears.
6. Have the propane system checked
and leakage source corrected before
using again.
Ignition of flammable vapors could lead to
a fire or explosion and result in death or
serious injury.
PROPANE GAS LEAK
DETECTOR
Your coach is equipped with a Propane Gas
Leak Detector, similar to the one shown below.
The leak detector sounds an alarm if an unsafe
amount of propane gas is present inside the
coach.
PROPANE GAS LEAKS
Check propane gas system for leaks yearly, or
as necessary.
The following label is located in the vehicle
near the range area. If you smell gas within the
vehicle, quickly and carefully perform the
procedures listed.
2-3
SECTION 2 –
WARNING
WARNING
SAFETY AND PRECAUTIONS
EXPLOSION HAZARD: DO NOT use an
open flame to test for gas leaks. When
testing for gas line leaks with a soapy
water solution, DO NOT use a detergent
containing ammonia or chlorine. These
substances may generate a chemical
reaction causing corrosion to gas lines,
resulting in dangerous leak conditions.
Death or serious injury can result.
Power Connection
The Propane Gas Leak Detector is powered by
the house batteries. If the House/Coach Battery
Disconnect switch is shut off or the battery cable
is disconnected from the batteries, the alarm will
not work. The Propane Gas Leak Detector fuse or
circuit breaker is located in the 12-volt house
electrical load center.
Because the Propane Gas Leak Detector is
connected to the house battery, it is always
drawing a small amount of current. Even though
this current draw is slight, it could drain the house
battery during storage periods when the house
battery will not be charged regularly by the
engine or shoreline.
Replacement
When replacing this alarm, we recommend
replacing only with the same model, or with one
that is also listed for RV application. We
recommend obtaining a replacement from your
Winnebago Industries® dealer.
Further Information
See the manufacturer’s user guide provided in
your InfoCase for further instructions.
CARBON MONOXIDE
WARNING
Avoid inhaling exhaust gases, as they
contain carbon monoxide, which is a
colorless, odorless, and poisonous gas.
Death or serious injury can result.
The best protection against carbon monoxide
entry into the vehicle body is a properly
maintained engine exhaust and ventilation
system. It is recommended that the exhaust
system and body be inspected by a qualified
motorhome service center:
•Each time the vehicle is serviced for an oil
change.
•Whenever a change in the sound of the
exhaust system is noticed.
•Whenever the exhaust system, underbody , or
rear of the vehicle is damaged.
To allow proper operation of the vehicle’s
ventilation system, keep front ventilation inlet
grill clear of snow, leaves, or other obstructions
at all times. DO NOT OCCUPY A PARKED
VEHICLE WITH ENGINE RUNNING FOR
AN EXTENDED PERIOD.
Do not run engine in confined areas, such as a
garage, except to move vehicle into or out of the
area.
CARBON MONOXIDE ALARM
Your coach is equipped with a Carbon
Monoxide (CO) Alarm, which has a sensor that is
designed to detect toxic carbon monoxide gas
fumes resulting from incomplete combustion of
fuel. It will detect CO gas from any combustion
2-4
source such as the furnace, gas range/oven, water
WARNING
Press button to test
Carbon Monoxide Alarm
WARNING
Smoke Alarm
Push button
to test
heater, refrigerator, chassis engine, and electric
generator engine.
SECTION 2 –
SAFETY AND PRECAUTIONS
SMOKE ALARM
Your coach is equipped with a Smoke Alarm
(located on the ceiling in the lounge area.) The
Smoke Alarm is powered by a 9-volt battery and
has a sensor that is designed to detect smoke.
Failure to replace this product by the
“REPLACE BY DATE” printed on the
alarm cover may result in death by
Carbon Monoxide poisoning.
Replacement
When replacing this alarm, we recommend
replacing only with the same model, or with one
that is also listed for RV application. We
recommend obtaining a replacement from your
Winnebago Industries
®
dealer.
Further Information
Please read the information provided by the
manufacturer, which is included in your InfoCase
for further information.
The following label is affixed to the Smoke
Alarm.
Test smoke alarm operation after vehicle
has been in storage, before each trip, and
at least once per week during use. Failure
to do so can result in death or serious
injury.
Replacement
When replacing this alarm, we recommend
replacing only with the same model, or with one
that is also listed for RV application. We
recommend obtaining a replacement from your
Winnebago Industries
®
dealer.
Further Information
See the manufacturer’s information in your
InfoCase for further instructions.
2-5
SECTION 2 –
Fire Extinguisher
(Located near sliding entrance door)
-Typical installation shown
SAFETY AND PRECAUTIONS
FIRE EXTINGUISHER
A dry chemical Fire Extinguisher is located
near the sliding entrance door.
We recommend that you become thoroughly
familiar with the operating instructions displayed
on the side of the Fire Extinguisher and in the
information supplied in your InfoCase.
We also recommend that you inspect the Fire
Extinguisher for proper charge at least once a
month in accordance with National Fire
Protection Association (NFPA)
recommendations as stated on the label.
If the charge is insufficient, the Fire
Extinguisher must be replaced.
Replacement
If for any reason you must replace the Fire
Extinguisher, the replacement must be the same
type and size as the one originally supplied in
your coach. We recommend obtaining a
replacement only from your Winnebago
Industries® dealer or a reliable RV parts supplier.
ELECTRICAL
•Careless handling of electrical components
can be fatal. Never touch or use electrical
components or appliances while feet are bare,
while hands are wet, or while standing in
water or on wet ground.
•Improper grounding of the vehicle can cause
personal injury . Do not plug the utility power
cord into an outlet which is not grounded and
do not adapt the plug to connect to a receptacle
for which it is not designed.
•Do not attach an extension cord to the utility
power cord.
•Do not use any electrical device that has had
the ground pin removed.
•A void overloading electrical circuits. Replace
fuses or circuit breakers with those of the
same size and amperage rating only. Never
use a higher rated fuse or breaker.
•Use caution when handling or working near
electrical storage batteries. Always remove
jewelry and wear protective clothing and eye
covering. Avoid creating sparks.
NOTICE
Do not test the fire extinguisher by
discharging it. Partial discharge can
cause leakage of pressure or contents,
which would render the unit inoperative
when needed. When using the fire
extinguisher , aim the spray at the base of
the fire.
2-6
LOADING
•Store or secure all loose items inside the
motorhome before traveling. Possible
overlooked items such as canned goods or
small appliances on the countertop, cooking
pans on the range, or free-standing furniture
items can become dangerous projectiles
during a sudden stop.
•Be aware of GVWR, GAWR, and individual
load limit on each tire or set of duals (See
“Loading the Vehicle” in Section 11 - Miscellaneous).
SECTION 2 –
WARNING
SAFETY AND PRECAUTIONS
•Never load the motorhome in excess of the
gross vehicle weight rating of the gross axle
weight rating for either axle.
MAINTENANCE
•Do not remove the radiator cap while engine
and radiator are still hot. Always check
coolant level visually at the see-through
coolant reservoir.
•Never get beneath a vehicle that is held up by
a jack only.
•Do not mix different construction types of
tires on the vehicle, such as radial, bias, or
belted tires, as vehicle handling may be
affected. Replace tires with exact size, type,
and load range.
•Refer to your chassis manual for complete
maintenance precautions and
recommendations.
Escape Door - Rear Double Doors
(Model 70A and 70X)
•Pull latch (right door) forward and push door
open.
•Push latch (left door) rearward and push door
open.
EMERGENCY EXITS
Escape Door - Sliding Door
(Model 70A, 70X, and 70C)
•T o open the passenger side sliding door , push
down on the release button on the left-hand
side of the door while pushing door outward
and sliding to the right. See following photo.
POWER SOFAS AND BEDS
Keep people away from operating
mechanism and pinch hazard areas
during use. Failure to do so could cause
injury.
2-7
SECTION 2 –
WARNING
SAFETY AND PRECAUTIONS
FORMALDEHYDE
INFORMATION
Some of the materials used in this recreational
vehicle emit formaldehyde. Eye, nose, and throat
irritation, headache, nausea, and a variety of
asthma-like symptoms, including shortness of
breath have been reported as a result of
formaldehyde exposure. Reaction to
formaldehyde exposure may vary among
individuals. Elderly persons and young children,
as well as anyone with a history of asthma,
allergies, or lung problems may be at greater risk.
Research is continuing on the possible long-term
effects of exposure to formaldehyde. Inadequate
ventilation may allow formaldehyde and other
contaminants to accumulate in indoor air.
Ventilation to dilute the indoor air may be
obtained from a passive or mechanical
ventilation system. Always be sure to thoroughly
ventilate your recreational vehicle before and
during each use. High indoor temperatures and
humidity may raise formaldehyde levels. When a
recreational vehicle is in areas subject to high
temperatures, an air conditioning system can be
used to control indoor temperature levels. If you
have any questions regarding the health effects of
formaldehyde, consult your doctor or local health
department.
This vehicle, like other vehicles, may
contain small amounts of one or more
substances which are listed by the state
of California for causing cancer or
reproductive toxicity.
MOLD, MOISTURE, AND YOUR
MOTORHOME
What is Mold?
Molds are part of the natural environment.
They are as old as the Earth itself and mold
spores are almost everywhere at some level
waiting to grow. Mold plays a part of nature by
breaking down dead organic matter, such as
fallen leaves and dead trees. Indoors however,
mold growth should be avoided. Molds
reproduce by means of tiny spores. Those spores
are invisible to the naked eye and float
throughout the outdoor and indoor air. Because
of the nature of the use of a motorhome, it is
natural for a motorhome to be introduced into an
environment with mold spores.
Mold is a plant and requires its own special
environment to grow. That environment includes
organic materials, nutrients, moisture, and proper
temperature.
How Can I Avoid Mold?
To reduce the ability for mold to grow, you
must reduce what constitutes its growth
environment. Mold can grow with the smallest of
a nutrient base. Just small amounts of dirt or dust
on the carpet can be enough to allow the mold
process to begin. Keep the environment as clean
as possible. Vacuum the carpet. Clean food spills
thoroughly and quickly. Avoid grease buildup
near the stove or sink. Clean the exhaust fan
above the stove often.
Minimize moisture in your motorhome and
keep humidity low. Clean spills quickly. Do not
allow condensation to build up. You can open
windows and vents to minimize condensation.
Use of the air conditioner can assist in removing
moisture from the air. Avoid leaks, but if leaks do
occur, make repairs promptly.
Avoid bringing mold into your motorhome.
Plants, cloths, books, and other household items
may already have mold present. It is easy to
transfer mold into your motorhome environment.
2-8
SECTION 2 –
SAFETY AND PRECAUTIONS
Monitor your motorhome. Periodically check
those hidden areas in corners, closets, and
cabinets to assure mold is not present.
What if I Find Mold?
If mold develops, clean the area with a
concentrate of soap and bleach. Items that
contain mold that cannot be cleaned should be
removed from the vehicle.
Can Mold Harm Me?
The effects of mold and airborne mold spores
may cause irritation to some people. Experts
disagree on the level of exposure that may cause
health concerns.
If Mold Is Present, What Will
®
Winnebago Industries
If Winnebago Industries determines that mold
is present in the motorhome as a result of a
manufacturing defect reported to Winnebago
Industries within the limited warranty period,
Winnebago will clean the affected area(s) and/or
replace affected items as it deems necessary. This
is the extent of coverage provided by Winnebago
Industries. Winnebago Industries, however, will
not assume responsibility for mold deemed to be
a result of a motorhome users lack of timely and
appropriate action to mitigate circumstances
should a problem occur.
If Winnebago Industries determines that mold
is present due to conditions it determines is not a
result of a manufacturing defect found within the
warranty period, Winnebago Industries will not
provide any financial assistance to the repair of
the condition.
Do?
ROADSIDE EMERGENCY
Because of the size and weight of this vehicle
and its tires, and the possible complications
involved in tire changing, we strongly advise
obtaining professional road service to change a
flat tire whenever possible. However, if an
emergency requires you to change the tire
yourself, please exercise extreme caution and
read all tire changing information in the chassis
manual.
Never get beneath a vehicle that is held up by
a jack only.
If You Get A Flat Tire
•DO NOT panic.
•Grip the steering wheel firmly and steer the
vehicle as straight as possible. Avoid quick
maneuvers. You may need to counter-steer to
compensate for “pull” created by the failed
tire.
•DO NOT stomp on the brake. This abruptly
shifts the vehicle’s weight forward, making it
nose-dive and pull toward the blown-out side.
•DO NOT jerk your foot off the accelerator.
Just ease back on the accelerator slowly and
gently to continue momentum. The deflated
tire will slow the vehicle.
•If you must change lanes to get to a safe
stopping place, use your signals to warn other
motorists and change lanes smoothly and
carefully after you are certain the lane is clear .
•Let the vehicle coast to a stop, gently steering
to a safe stopping place off the traffic lanes of
the road. Do not worry about damaging the
tire or wheel rim by driving on it. A tire or
wheel replacement is cheaper than damaging
the vehicle or injuring yourself.
•When you have come to a stop, activate your
hazard flashers to warn other motorists, then
exit the vehicle carefully.
•Set out flares or other warning devices.
Check your tires for proper inflation before
each trip and at least once a month with an
accurate tire gauge. See “Valve Stem Access” in
Section 3 - Driving Your Motorhome.
Spare Tire Storage
If your coach is supplied with a spare tire, it
will be fastened to the backwall of the coach, on
a swing-down spare tire carrier beneath the rear
of the coach, or on a swing-out carrier mounted
on the hitch.
2-9
SECTION 2 –
CAUTION
Spare Tire Mounting Locations
SAFETY AND PRECAUTIONS
Please follow all safety warnings and
instructions for removing spare tire from the
carrier.
Do not lie beneath tire carrier while
removing tire. The tire can fall and injury
can occur.
Swing-Down Carrier
–If Equipped
•Support tire carrier with a jack or block while
removing wire pin and wing nut from bolt at
front of carrier.
•Carefully lower tire carrier to ground.
•Lift or slide tire from carrier.
•Do not over-tighten wing nut when returning
carrier to storage position.
•Disconnect power wire from the connector
plug and set tire cover and power wire aside.
•Remove two (2) nuts from the mounting
locations.
Swing-Out Carrier on Hitch
(Model 70C)
•Unlock latch at bottom of spare tire cover with
the provided key (located on key ring).
Remove the spare tire cover and set aside.
•Slide the tire from the carrier.
•Reverse steps to reinstall tire to the swing-out
carrier.
NOTE: Reconnect the power wire to the
connector plug to assure that the brake/
taillight is functioning.
Recovery Towing
When calling a professional towing service,
we recommend that you advise them of your
coach length and approximate front axle weight
listed on your Vehicle Certification Label. This
will allow the towing operator to determine the
proper towing equipment to use.
Winnebago Industries® does not assume
responsibility for damage incurred while towing
this vehicle.
2-10
NOTE: Consult your chassis manual for towing
instructions or precautions provided by
the chassis manufacturer.
NOTICE
WARNING
Valve Stem Clearance Notch
V alve Stem Clearance Notch aligned to V alve
Stem
Clearance Notch
Valve Stem
Chassis Supplied Wheel and Center Cover
Do not lift on bumper . Dama ge will result
to front end body parts.
Stay out from beneath the motorhome
while it is suspended by the towing
assembly. Do not allow passengers to
occupy a towed vehicle. Death or serious
injury can result.
SECTION 2 –
SAFETY AND PRECAUTIONS
WHEEL TRIM – STANDARD
(Mercedes-Benz® Sprinter Chassis)
Note: Reference the chassis manufacturer’s user
which is removed similar to a hubcap. Remove
the covers by carefully prying the perimeter
flange away from the wheel flange.
stem clearance notch (located on the back side of
the front cover).
guide provided in your InfoCase for
complete instructions and cautions on
changing a wheel.
Under the front cover is the chassis supplied
black center cover. The recessed area has three
alternating silver washers. Removal of the three
nuts on top of the three washers will allow the
removal of the center cover while the wheel is
still retained to the hub with the remaining three
nuts.
The wheel on your coach has a push on liner
Check for valve stem location and the valve
2-11
SECTION 2 –
WARNING
WARNING
Chrome Washer
Chrome Lug Nut
Chrome Adapter
Stylized Chrome Wheel
SAFETY AND PRECAUTIONS
When re-installing the front liner, make sure
to align the stem clearance notch on the back of
the liner with the valve stem.
If the notch is not aligned with the valve
stem, the valve stem may be damaged
which could deflate the tire causing
steering or handling problems.
When installing the liner, be sure it is engaged
all around the perimeter (outside edge) equally.
Note: If the edge on one side is pushed in before
the other, it may be difficult to complete
the push on procedure.
Further Information
See the chassis manufacturer’s user guide
provided in your InfoCase for complete
instructions and re-torque information.
DO NOT operate the vehicle with less
than all 6 nuts installed and properly
torqued.
WHEELS – STYLIZED CHROME
(Mercedes-Benz® Sprinter Chassis)
–If Equipped
The stylized wheel on your coach has bright
(chrome) lug nuts and washers. Because the hex
on the specialized lug nut is larger than the
chassis supplied lug wrench, an adapter is
provided (stored with the lug wrench) to tighten
or remove the bright (chrome) lug nuts.
Removing the Wheel
Note: Reference the chassis manufacturer’s user
guide provided in your InfoCase for
complete instructions and cautions on
changing a wheel.
1. Once the vehicle is prepared for wheel
removal, obtain the adapter from the co-driver
foot well compartment and engage the adapter
to the lug nut. The visible hex on the adapter
is the correct size for the lug wrench.
2-12
SECTION 2 –
Six Chassis Supplied Lug Nuts with attached
washers (located in the co-driver foot well
compartment)
Chassis Supplied Steel Wheel/Spare
WARNING
SAFETY AND PRECAUTIONS
2. Slide the lug wrench onto the adapter and
rotate counter-clockwise to loosen the lug
nuts.
Note: Do not place the wheel nuts in sand or
dirt. The threads of the wheel bolts and
wheel nuts could be otherwise damaged
when being installed.
If a stylized wheel needs to be replaced with
the spare steel wheel DO NOT use the stylized
chrome wheel bright lug nuts as they do not seat
properly on the steel wheel. Use the six chassis
supplied lug nuts with attached washer located in
the co-driver foot well compartment. The chassis
supplied lug nut hex is the correct size for the lug
wrench (Do not use Adapter).
•Once the vehicle is prepared for stylized
wheel installation, use the chrome washer,
chrome lug nut, and chrome adapter with lug
wrench to re-install the stylized chrome
wheel.
Further Information
See the chassis manufacturer’s user guide
provided in your InfoCase for complete
instructions and re-torque information.
Reinstalling Stylized Chrome Wheel
Note: Reference the chassis manufacturer’s user
guide provided in your InfoCase for
complete instructions and cautions on
changing a wheel.
DO NOT operate the vehicle with less
than all 6 nuts installed and properly
torqued.
JUMP STARTING
If your coach will not start from the chassis
battery, try using the Battery Boost switch to
divert power from the house batteries to the
starter. (See “Battery Boost Switch” in Section 3
- Driving Your Motorhome).
If you wish to try jump starting the engine
using another vehicle or booster system, see your
chassis manual for connecting jumper cables to
the automotive electrical system.
2-13
SECTION 2 –
SAFETY AND PRECAUTIONS
NOTICE
Do not attempt to push start this vehicle.
Damage to the transmission or other
parts of the vehicle will occur.
ENGINE OVERHEAT
If you see or hear steam escaping from the
engine compartment or have any other reason to
suspect an extreme engine overheating condition,
pull the vehicle over to the roadside as soon as it
is safe to do so, stop the engine, and get all
passengers out of the vehicle.
NOTICE
Operating a vehicle under a severe
overheating condition can result in
damage to the vehicle.
For information on what to do in case of
overheating, consult your chassis manual.
2-14
SECTION 3 – DRIVING YOUR MOTORHOME
WARNING
Locking Arm
(Locked position shown)
Safety Lock
The information in this section refers only to
features installed or adapted to the dash and
driver compartment area by Winnebago
Industries®. It also includes passenger seating in
the living area of the coach.
Further Information
See the chassis manual in your InfoCase for
all original chassis related controls,
instrumentation, switches, and other features.
This includes items such as cruise control,
climate controls, gauges, wipers, lights, front
seats, and three-point safety belts, etc.
SEATS – DRIVER/CO-PILOT
The driver and co-pilot seats may be
independently adjusted to suit individual
preference.
SEATS – COMPANION
–If Equipped
Removing Companion Seats
Quick-Release Pedestal Operation
Instructions
•Press DOWN on the Safety Lock and support
seat while rotating the Locking Arm
COUNTER-CLOCKWISE, until the arm
contacts the stop pin (unlocked position).
Damage to interior door panels will result
if seats are swiveled toward the doors. Do
not turn driver seat counter clockwise and
do not turn passenger seat clockwise.
Further Information
See the chassis manual in your InfoCase for
instructions on seat adjustments.
5 - DASH / AUTO
3-1
SECTION 3 –
WARNING
Floor Plate
Rear Hooks
(insert into
floor plate
pockets)
DRIVING YOUR MOTORHOME
•Tip the seat rearward until the lock pin clears
the floor plate locking ramp, then re-lock the
Locking Arm to avoid bending.
•With the seat tilted slightly rearward, lower
the Pedestal/Seat Assembly Rear Hooks into
the pockets in the floor plate.
•Push DOWN on the Safety Lock and rotate
the Locking Arm COUNTER-CLOCKWISE
(to the unlocked position). Align the lock pin
to allow it to pass through the floor plate at the
locking ramp.
•With the s eat tilted slightly rearward, remove
the seat assembly by lifting it up and forward.
Installing Companion Seats
The following label is located on the
Companion Seats:
•Push DOWN on the front of the seat and rotate
the Locking Arm slightly to ensure that the
lock pin is engaged under the locking ramp.
•Rotate the Locking Arm CLOCKWISE (to
the locked position), ensuring the Locking
Arm is captured by the Safety Lock.
Engage rear hooks in floor plate with
locking arm captured by safety lock.
Failure can result in death or injury . Refer
to operator manual.
3-2
Loading...
+ 124 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.