Winnebago Access Impulse Operation Manual

DVD HOME THEATER
SYSTEM

–If Equipped

The available DVD home theater
system operates from 120-volt AC
household current only, so you must
have either the shoreline connected, the
generator running, or the inverter turned
on (if equipped).

The TV is connected to the home
theater system, which plays through
theater speakers in the lounge area of the
coach.

Set TV Video Input

• Turn TV and DVD player ON.

• Press

FUNCTION
button on front
of TV or
remote and
select HDMI1
input.
TV screen will
display DVD player logo when
correct input is selected.

Play DVD with Theater Sound

• Insert DVD into player. DVD will

begin to load automatically. TV

screen will typically show
“READING” or “LOADING”.

• DVD may load
directly to main
title/menu screen
or it may begin to play previews. Y ou
may be able to skip previews if
desired by pressing the PRESET+
button until you see the main menu
screen.

• When main menu
screen appears, use
arrow buttons on
remote to select
desired entry or press
the center button on remote (or
“Play” button on DVD player) to
begin playing feature.

• Volume is adjusted with remote (or
volume buttons on DVD player).

TV Sound Through Home Theater Speakers

When watching TV programs alone,
the TV normally plays sound through its
own built-in stereo speakers. If you wish
to connect TV stereo sound output to the
home theater speakers for a richer sound
quality, follow these steps:

• Turn TV and DVD player ON.

• Press FUNCTION button on DVD

player or remote to set DVD player to
TV CABLE.

• Use TV Menu button to set TV audio

output to “Variable Audio Output”.

This routes TV stereo sound output
through home theater system.
> Audio (turn speaker Off)
> Setup (change to Variable)

• Select TV channels and adjust
volume with remote for either the TV
or DVD.

NOTE: Turn the volume level up

significantly on the DVD player
when using the home theater as
an amp for the TV through the
stereo system.

DVD PLAYER
(Without Home Theater)

–If Equipped

The DVD player is connected to the
TV and plays through the TV stereo
speakers or the deluxe sound rear radio
speakers in the lounge area of the coach.

Set TV Sound Output

• Use the TV Menu button to set TV

audio output to Variable Audio

Output

instructions.) This will connect TV
stereo sound output to the deluxe
speakers in the lounge area.

. (See TV owner’s manual for

Continued—

• Volume is adjusted with the TV

MENU

remote or volume buttons.

Set TV Video Input

• Turn TV and DVD player ON.

• Press the SOURCE or INPUT
button on the TV or TV remote to
select “INPUT 1” or “AV1”.

• The TV screen will
display the DVD
player logo when
the correct input is
selected.

Play DVD

• Insert DVD into player. DVD will
begin to load automatically. TV
screen will typically show
“READING” or “LOADING”.

• The DVD may load directly to the
main title/menu screen or it may
begin to play previews. Y ou may be
able to skip previews if desired by
pressing the NEXT button until you
see the main menu screen.

ENTER

ENTER

PLAY/

T/F

PAUSE

• Volume is adjusted with the DVD
remote (or volume buttons on DVD
player).

Audio-Video System

Basic Operation

Guide

NOTE: See your InfoCase for specific

operating guides for audio and
video components.

NEXT

ENTER

• When the main menu screen
appears, use the arrow buttons on
the DVD remote to select the desired
entry or press the ENTER or PLAY
buttons on the remote (or “Play”
button on DVD player) to begin
playing the feature.

Part No. 161501-13-002

Rev. 1301120416

Copyright 2012 Winnebago Industries, Inc.

All rights reserved.