Winmate IB70 User Manual

Page 1
IB70 Motherboard
VGA, Dual Giga Ethernet, and Mini-PCIe Interface
V110
User Manual
Version 1.4
Manual Number: 9171111I101Z
Page 2
IB70 Motherboard User Manual
ii
Preface
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. We assume no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or masks work rights to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. We make no representation or warranty that such application will be suitable for the specified use without further testing or modification.
Warranty
We warrant that each of its products will be free from material and workmanship defects for a period of one year from the invoice date. (Standard is one year, extended warranty will need to discuss with our sales representatives. If the customer discovers a defect, we will, at its option, repair or replace the defective product at no charge to the customer, provided it is returned during the warranty period of one year, with transportation charges prepaid. The returned product must be properly packaged in its original packaging to obtain warranty service.
If the serial number and the product shipping data differ by over 30 days, the in-warranty service will be made according to the shipping date. In the serial numbers the third and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g., with A for October, B for November and C for December).
For example, the serial number 1W11Axxxxxxxx means October of year 2011.
Page 3
IB70 Motherboard User Manual
iii
Packing List
Before using this Motherboard, please make sure that all the items listed below are present in your package:
IB70 Motherboard User Manual & Driver CD
Optional Accessories:
Power Cord
If any of these items are missing or damaged, contact your distributor or sales representative immediately.
Customer Service
We provide a service guide as below for any problem by the following steps: First, contact your distributor, sales representative, or our customer service center for technical support if you need additional assistance. You need to prepare the following information before you call:
Product serial number Peripheral attachments Software (OS, version, application software, etc.) Detailed problem description The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are always ready to give advice on application requirements or specific information on the installation and operation of any of our products. Please do not hesitate to call or e-mail us.
Page 4
IB70 Motherboard User Manual
iv
Safety Precautions
Warning!
Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronic personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis.
Page 5
IB70 Motherboard User Manual
v
Safety and Warranty
1. Please read these safety instructions carefully.
2. Please keep this user- manual for later reference.
3. Please disconnect this equipment from any AC outlet before cleaning. Do not
use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or
letting it fall could cause damage.
7. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
8. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
9. All cautions and warnings on the equipment should be noted.
10. If the equipment is not used for a long time, disconnect it from the power
source to avoid damage by transient over-voltage.
11. If any of the following situations arises, get the equipment checked by service
personnel:
A. The power cord or plug is damaged. B. Liquid has penetrated into the equipment. C. The equipment has been exposed to moisture. D. The equipment does not work well, or you cannot get it to work according
to the user’s manual.
E. The equipment has been dropped and damaged. F. The equipment has obvious signs of breakage.
Page 6
IB70 Motherboard User Manual
vi
Revision History
Version
Date
Note
Author
1.0
2014.07.04
Initial Draft
Jimmy Chen
1.1
2014.08.15
Block Diagram revision
Jimmy Chen
1.2
2014.09.01
Add OS Selection
Jimmy Chen
1.3
2015.05.08
Add USB 3.0 Driver
Installation
Jimmy Chen
1.4
2015.12.14
Corrected:
PIN Assignments , BIOS
Configuration, Driver
Installations
Jimmy Chen,
edited by Anna
Kiseleva
Page 7
IB70 Motherboard User Manual
vii
CONTENTS
PREFACE ............................................................................................... II
CHAPTER 1 GENERAL INFORMATION ................................................ 2
1.1 INTRODUCTION ....................................................................................... 2
1.2 FEATURES .............................................................................................. 2
1.3 MOTHERBOARD SPECIFICATIONS ................................................................ 3
CHAPTER 2 HARDWARE INSTALLATION ............................................. 8
2.1 MEMORY MODULE (SO-DIMM) INSTALLATION ........................................... 8
2.2 I/O EQUIPMENT INSTALLATION .................................................................. 9
2.2.1 12V DC-IN ........................................................................................................ 9
2.2.2 Serial COM Ports .............................................................................................. 9
2.2.3 External VGA .................................................................................................... 9
2.2.4 Ethernet Interface ............................................................................................ 9
2.2.5 USB Ports ......................................................................................................... 9
2.2.6 Audio Function ............................................................................................... 10
2.3 JUMPERS AND CONNECTORS .................................................................... 11
2.3.1 Component Side ........................................................................................... 11
2.3.2 Solder Side ..................................................................................................... 12
2.3.3 I/O Side .......................................................................................................... 13
2.4 JUMPER SETTINGS ................................................................................. 14
2.4.1 Jumper List ..................................................................................................... 14
2.4.2 Setting Jumpers ............................................................................................. 15
2.4.2.10 JP11: Clear CMOS ..................................................................................... 18
2.5 CONNECTORS AND PIN ASSIGNMENT ........................................................... 19
2.5.1 Front Side Setting Description........................................................................ 19
J2: DP ...................................................................................................................... 26
2.5.2 I/O Side Setting Description ........................................................................... 37
CHAPTER 3 AMI BIOS SETUP ........................................................... 41
3.1 WHEN AND HOW TO USE BIOS SETUP ........................................................ 41
3.2 BIOS FUNCTIONS .................................................................................... 42
3.2.1 Main Menu .................................................................................................... 42
3.2.2 Advanced Menu ............................................................................................. 44
3.2.3 Chipset Menu ................................................................................................ 64
Page 8
IB70 Motherboard User Manual
viii
3.2.4 Security Menu ............................................................................................... 65
3.2.5 Boot Configuration ....................................................................................... 66
3.2.6 Save & Exit .................................................................................................... 67
3.3 USING RECOVERY WIZARD TO RESTORE COMPUTER ....................................... 70
CHAPTER 4 DRIVER INSTALLATION .................................................. 73
4.1 INTEL CHIPSET DRIVER INSTALLATION........................................................... 73
4.2 GRAPHICS DRIVER INSTALLATION ................................................................ 77
4.3 AUDIO DRIVER INSTALLATION ..................................................................... 82
4.4 ETHERNET DRIVER INSTALLATION ................................................................ 85
4.5 INTEL SIDEBAND FABRIC DEVICE (INTEL MBI) DRIVER INSTALLATION
(FOR WINDOWS 8) ........................................................................................ 88
4.6 INTEL TRUSTED ENGINE INTERFACE TXE INSTALLATION.................................... 91
4.7 FINTEK COM PORT DRIVER INSTALLATION ................................................... 94
4.8 USB 3.0 DRIVER INSTALLATION (FOR WINDOWS 7) ....................................... 97
CHAPTER 5 TECHNICAL SUPPORT DOCUMENTS ................................. 102
5.1 DIGITAL I/O SDK .................................................................................. 102
5.2 WATCHDOG SDK ................................................................................... 102
Page 9
IB70 Motherboard User Manual
1
General Information
This chapter includes the IB70 Motherboard background information. Sections include:
1.1 Introduction
1.2 Features
1.3 Motherboard Specifications
Page 10
IB70 Motherboard User Manual
2
Chapter 1 General Information
1.1 Introduction
Thank you for choosing the IB 70 SBC motherboard. This motherboard is
integrated with Bay Trail Intel® Celeron N2930 which offers a high performance
computing platform with low power consumption. The new motherboard
supports 204-pin SO-DIMM DDR3L at speeds of 1066/1333 MHz, up to 8GB.
One SATAII interface provides ample capacity. There is an advanced full set of
I/O ports including one USB 3.0, five USB 2.0, two LAN ports and audio jack for
microphone, line-in and line-out. In addition, the motherboard has Dual Gigabit
Ethernet, four COM ports. Display requirements are met with rich interfaces,
such as eDP, LVDS, and CRT. The graphic engine adopts Intel® SoC Integrated
offer high definition display function, and it also supports 24-bit Dual-Channel
LVDS.
With all of the integrated features, IB70 SBC is designed to satisfy most of the
applications in the industrial computer market, such as Gaming, POS, KIOSK,
Industrial Automation, and Programmable Control System. It is designed in a
compact 3.5” form factor and measures 146mm x 102mm to meet the
demanding performance requirements of today’s business and industrial
applications.
1.2 Features
Mini-ITX Form Factor ( 170mm x 170mm) Supports Bay Trail Intel® Celeron N2930 1.83GHz processor System memory up to 8GB DDR3L 1066, SO-DIMM Intel® SoC Integrated Intel® HD Graphics Engine VGA, 18/24-bit Dual-Channel LVDS, eDP 1.3 Intel® WG82574L GbE Mini PCIe (two for wireless, one for mSATA SSD), 4 x COM, 1 x USB 3.0, 7 x
USB 2.0, 2 x SATA II, 12-bit GPIO
DC 12V IN
Page 11
IB70 Motherboard User Manual
3
1.3 Motherboard Specifications
CPU Type
Intel® Celeron® Bay Trail-M N2930
CPU Speed
1.83GHz
Chipset
Intel® SoC Integrated
BIOS
AMI 64Mbit Flash
Graphic
Intel® Graphics Engine
LCD interface
Dual-Channel 18/24 bit LVDS Up to 1920 x 1080 @ 60Hz
Resolution
VGA mode: up to 1920 x 1200 @ 60Hz
DVI: 1920 x 1200 @ 60Hz
LAN
2 x Giga LAN (Intel WG82574L GbE )
Memory Type
2 x SO-DIMM socket, supports up to 8GB DDR3
1066/1333
Super I/O
Fintek F81866
Audio
Realtek ALC886 HD Audio Codec
USB
8 ports, 1 x USB 3.0, 7 x USB 2.0 (4 x USB 2.0
pin-header )
Edge Connectors
1 x DC-IN Jack (+12V)
1 x VGA out connector
2 x Gigabit LAN RJ-45
1 x RS232/422/485
2 x RS232
3 x USB connector (1 x USB 3.0, 2 x USB 2.0)
2 x PS2
1 x Audio Jack(Line in, Line out, Mic in)
On Board
Pin-Header
Connectors
2 x SATA connector for SATAI/II 3.0 Gb/s
1 x 10 pins pin-header for Front Panel(2x5)
1 x 8 pins pin-header for 5V/12V external power
1 x 3 pins pin-header for CPU Fan
1 x 3 pins pin-header for System Fan
2 x 2 pins pin-header for 5V external power
1 x 2 pins pin-header for 12V external power
2 x 8 pins pin-header for USB (2X4)
1 x 10 pins Digital I/O(2x5)
1 x 10 pins pin-header for COM2 (2X5)
1 x 4-pin Power-input connector
1 x 20 pins Connector for LVDS
Page 12
IB70 Motherboard User Manual
4
1 x 30 pins Connector for eDP
1 x 3 pins digital panel backlight brightness controller
1 x 7 pins digital panel inverter
2 x 2 pins pin-header for Speaker
1 x 20 pins pin-header for LPT port(2X10)
Power Connector
Input: 4-pin Power-input connector
Expansion Slots
2 x Mini PCIe slot
Form Factor
Mini-ITX
Dimensions
170mm x 170mm
Mechanical &
Environmental
Operating temperature: 0°C to 60°C
Operating Humidity: 10 ~ 90% relative humidity,
non-condensing
Shock: Operating 15G, 11ms duration
Vibration: Operating 5 Hz~500Hz / 1Grms / 3 Axis
Certification: CE, FCC, RoHS
Page 13
IB70 Motherboard User Manual
5
Function block (V110)
Page 14
IB70 Motherboard User Manual
6
Board dimensions (V110)
Page 15
IB70 Motherboard User Manual
7
Hardware Installation
This chapter provides information on how to use
jumpers and connectors on the IB70 SBC
Motherboard. Be cautious while working with
these modules. Please carefully read the content
of this chapter in order to avoid any damages.
The sections include:
2.1 Memory Module Installation
2.2 I / O Equipment Installation
2.3 Jumpers and Connectors
2.4 Jumper Settings
2.5 Connectors and Pin Assignment
Page 16
IB70 Motherboard User Manual
8
Chapter 2 Hardware Installation
2.1 Memory Module (SO-DIMM) Installation
The IB70 SBC Motherboard provides one 204-pin SODIMM slot. The socket supports
up to 4GB DDR3L 1066/1333 SDRAM. When installing the Memory device, please follow the steps below
Steps 1 Firmly insert the SO-DIMM at an angle of about 30-degree into the slot. Align
the SO-DIMM with the slot until it is fully inserted. The notch on the SO-DIMM
should match the break on the slot.
Step 2 Press downwards on SO-DIMM until the retaining clips at both ends fully snap
closed and the SO-DIMM is properly seated.
Caution!
The SO-DIMM only fits in one correct orientation. It will cause
permanent damage to the development board and the SO-DIMM if
SO-DIMM is forced into the slot at the incorrect orientation.
Page 17
IB70 Motherboard User Manual
9
2.2 I/O Equipment Installation
2.2.1 12V DC-IN
The Motherboard allows plugging 12V DC-IN jack on the board without another
power module converter under power consumption by Intel® Celeron N2930 1.83GHz
Processor with Intel SoC integrated.
2.2.2 Serial COM Ports
Three RS-232 connectors build in the rear I/O. One optional COM ports support
RS-422/485. When an optional touch-screen is ordered with PPC, serial com port can
connect to a serial or an optional touch-screen. You can change Serial COM Port
settings trough Jumper Settings.
2.2.3 External VGA
The Motherboard has one VGA port that can be connected to an external CRT/ LCD
monitor. Use VGA cable to connect to an external CRT / LCD monitor, and connect the
power cable to the outlet. The VGA connector is a standard 15-pin D-SUB connector.
2.2.4 Ethernet Interface
The Motherboard is equipped with Intel WG82574L chipset which is fully compliant
with the PCI 10/100/1000 Mbps Ethernet protocol compatible. It is supported by
major network operating systems. The Ethernet ports provide two standard RJ-45
jacks.
2.2.5 USB Ports
Eight USB devices (One USB3.0, four with pin headers) may be connected to the
system though an adapter cable. Various adapters may come with USB ports. USB
usually connect the external system to the system. The USB ports support hot plug-in
connection. Whatever, you should install the device driver before you use the device.
Page 18
IB70 Motherboard User Manual
10
2.2.6 Audio Function
The Audio 7.1 channel capabilities are provided by a Realtek ALC886 chipset
supporting digital audio outputs. The audio interface includes three jacks: line-in,
line-out and mic in.
Page 19
IB70 Motherboard User Manual
11
2.3 Jumpers and Connectors
2.3.1 Component Side
Page 20
IB70 Motherboard User Manual
12
2.3.2 Solder Side
Page 21
IB70 Motherboard User Manual
13
2.3.3 I/O Side
Page 22
IB70 Motherboard User Manual
14
2.4 Jumper Settings
This section explains how to set jumpers for correct configuration of the
motherboard.
Note
A pair of needle nose pliers may be helpful when working with jumpers.
If you have any doubts about the best hardware configuration for your
application, contact your local distributor or sales representative before
you make any changes. Generally, you simply need a standard cable to
make most connections.
The jumper setting diagram is shown below. When the jumper cap is placed on both
pins, the jumper is SHORT. The illustration below shows a 3-pin jumper; pins 1 and 2
are short. If you remove the jumper cap, the jumper is OPEN.
2.4.1 Jumper List
The following table shows the function of each of the board's jumpers.
Label
Function
Note
JP1
Inverter Voltage Select
1x3 header, pitch 2.0mm
JP2
Inverter Enable Select
1x3 header, pitch 2.0mm
JP3
Backlight Control VR
1x3 Wafer, pitch 2.0mm
JP4
DC Mode Control Select
1x3 header, pitch 2.0mm
JP5
Brightness PWM Voltage Selector
1x3 header, pitch 2.0mm
JP6
Brightness Control Select
1x3 header, pitch 2.0mm
JP7
Brightness Control To VRD
1x3 header, pitch 2.0mm
JP8
Serial Port(RS232/422/485)Select
2x3 header, pitch 2.0mm
JP9
Serial Port(RS232/422/485)Select
3x4 header, pitch 2.0mm
JP10
VRD Brightness Function Select
1x3 header, pitch 2.0mm
JP11
Clear CMOS
1x3 header, pitch 2.0mm
1 2 3
Page 23
IB70 Motherboard User Manual
15
2.4.2 Setting Jumpers
JP1: Inverter Voltage Select
*Default
JP2: Inverter Enable Select
*Default
JP3: Backlight Control VR
Setting
Function
1-2*
5 V
2-3
12 V
Setting
Function
1-2*
Control to BLON
2-3
Normal (Always)
Pin
Name
Pin
Name
1
+5V
2
Black Light
Control
3
GND
3
2
1
3
2
1
Page 24
IB70 Motherboard User Manual
16
JP4: DC Mode Control Selector
*Default
JP5: From SoC Brightness PWM Voltage Selector
*Default
JP6: Brightness Control Selector
*Default
JP7: Brightness Control to VRD Selector
*Default
Setting
Function
1-2
VR knob Control to VRD
2-3*
VR knob Control to SBC
Setting
Function
1-2*
+ 3.3V
2-3
+ 5.0V
Setting
Function
1-2
Adjust by VR Knob
2-3*
PWM Mode
Setting
Function
1-2
WM to DC mode by
2-3*
VRD Control Mode
3
2
1
3
2
1
Page 25
IB70 Motherboard User Manual
17
JP8/JP9: COM Serial Port (RS232/422/485) Select
Please refer to JP8/JP9 settings below.
RS232
RS422
RS485
JP8
1-2
3-4
5-6
JP9
1-2 4-5 7-8
10-11
2-3 5-6 8-9
11-12
2-3 5-6 8-9
11-12
For example: At the picture below you can see RS-232, RS-422, RS-485 (J8/J9) jumper
setting. To select RS-232 set Jumper 8 Pin 1-2 to the SHORT position, and Jumper 9
Pin1-2, 4-5, 7-8, 10-11 to the SHORT position.
Page 26
IB70 Motherboard User Manual
18
JP10: VRD Brightness Control Select
*Default
JP11: Clear CMOS
*Default
Setting
Function
1-2
VRD REVERSE -
2-3*
VRD FORWARD +
Setting
Function
1-2
Clear CMOS
2-3*
Normal
3
2
3
2
1
Page 27
IB70 Motherboard User Manual
19
2.5 Connectors and Pin Assignment
2.5.1 Front Side Setting Description
The table below shows each of front side connectors and its functions.
Label
Function
Note
BT1
RTC Battery
2P Wafer, pitch 1.25mm
CN1
R-Speaker out
1x2 Wafer, pitch 2.0mm
CN2
L-Speaker out
1x2 Wafer, pitch 2.0mm
CON1
Panel Power Select
2x3 header, pitch 2.54mm
CON2
Backlight
1x7 Wafer, pitch 2.0mm
COM4
Serial port (RS232)
2x5 header, pitch 2.0mm
CPU_FAN
CPU _FAN1
3P Wafer, pitch 2.54mm
DC In
ATX12V1
1x2P Wafer, pitch 3.96mm
DEBUG1
DEBUG PORT
2x5 header, pitch 2.0mm
DIMM1
DDR3L
204pin,SODIMM slot
DIMM2
DDR3L
204pin,SODIMM slot
DIDO1
GPIO
2x7 header, pitch 2.0mm
J1
VRD Debug
1x5 Wafer, pitch 1.25mm
J2
DP
2x10 Wafer, pitch 1.25mm
J3
HDMI
FFC 18 pin , pitch 0.5mm
LVDS1
LVDS
2x20 Wafer, pitch 1.25mm
LPT1
Parallel Port
2x10 header, pitch 2.0mm
MINI PCIE1
WWAN
Mini-PCIe slot
MINI PCIE2
WIFI
Mini-PCIe slot
SATA1
SATA
SATA Connector
SATA_PWR1
SATA Power
2x4 Wafer, pitch 2.0mm
SIM1
Cable connector for SIM-100
6P Wafer, pitch 1.0mm
SSD1
mSATA
Mini-PCIe slot
Page 28
IB70 Motherboard User Manual
20
USB2
Internal USB2.0
2x4 Wafer, pitch 2.0mm
USB3
Internal USB2.0
2x4 Wafer, pitch 2.0mm
3V1
3.3V output
1x2 Wafer, pitch 2.0mm
5V1
5V output
1x2 Wafer, pitch 2.0mm
5V2
5V output
1x2 Wafer, pitch 2.0mm
12V1
12V output
1x2 Wafer, pitch 2.0mm
PANEL1
OSD membrane control
2x5 Wafer, pitch 2.0mm
SYS_FAN
SYS_FAN1
3P Wafer, pitch 2.54mm
Page 29
IB70 Motherboard User Manual
21
BT1: RTC Battery
Pin
Name
Pin
Name
1
BAT
2
GND
CN1: R-Speaker Out
CN2: L-Speaker Out
CON1: Panel Power Select
Pin
Name
1
ROUT-
2
ROUT+
Pin
Name
1
LOUT-
2
LOUT+
Page 30
IB70 Motherboard User Manual
22
CON2: Backlight
Pin
Name
Pin
Name
1
Backlight Power
2
Backlight Power
3
Backlight Power
4
GND
5
Brightness Adjust
6
GND
7
Backlight Enable
Note: Please refer to JP1 settings to select POWER RATING
COM4: Serial port (RS-232)
Pin
Name
Pin
Name
1
DCD
2
DSR
3
RXD
4
RTS
5
TXD
6
CTS 7 DTR 8 RI 9 GND
10
GND
Pin
Name
1-2*
+3.3V
3-4
+5V
5-6
+12V
Page 31
IB70 Motherboard User Manual
23
CPU_FAN1: CPU FAN
ATX12V1: DC-In
*Note: Pin 3 is not visible for user
Pin
Name
Pin
Name
1
GND
2
+12V
3
SENSE
Pin
Name
Pin
Name
1
+12V
2
GND
3*
GND
Pin1
Page 32
IB70 Motherboard User Manual
24
Debug 1: Debug Port
Pin
Name
Pin
Name
1
LPC_AD0
2
+3.3V
3
LPC_AD1
4
GND
5
LPC_AD2
6
LPC_FRAME
7
LPC_AD3
8
GND
9
RESET
10
CLOCK
DIMM1: DDR3
Page 33
IB70 Motherboard User Manual
25
DIMM2: DDR3
DIDO1: GPIO
Pin
Name
Pin
Name
1
GND
2
+5V
3
DOUT3
4
DOUT1
5
DOUT2
6
DOUT0
7
DINT3
8
DINT1
9
DINT2
10
DINT0
11
DIN4
12
DOUT4
13
DIN5
14
DOUT5
Page 34
IB70 Motherboard User Manual
26
J1: VRD Debug
J2: DP
Pin №
Name
Pin №
Name
1
DDI1_AUX_DN
2
SMB_DATA
3
DDI1_AUX_DP
4
SMB_CLK
5
GND
6
GND
7
DDI1_TX3_DN
8
NC
9
DDI1_TX3_DP
10
NC
11
GND
12
EDP_HPD
13
DDI1_TX2_DN
14
GND
15
DDI1_TX2_DP
16
GND
17
GND
18
GND
19
DDI1_TX1_DN
20
GND
21
DDI1_TX1_DP
22
LCDVDD
23
GND
24
LCDVDD
25
DDI1_TX0_DN
26
LCDVDD
27
DDI1_TX0_DP
28
LCDVDD
29
GND
30
NC
Note: Please refer to CON1 settings to select POWER RATING
Pin
Name
Pin
Name
1
+3.3V
2
DATA
3
CLOCK
4
RESET
5
GND
Page 35
IB70 Motherboard User Manual
27
J3: HDMI
Pin
Name
Pin
Name
1
TMDS_DATA2+
2
GND
3
TMDS_DATA2-
4
TMDS_DATA1+
5
GND
6
TMDS_DATA1-
7
TMDS_DATA0+
8
GND
9
TMDS_DATA0-
10
TMDS_CLOCK+
11
GND
12
TMDS_CLOCK-
13
CEC
14
NC
15
DDC_CLOCK
16
DDC_DATA
17
GND
18
5V
19
Hot Plug Detect
Page 36
IB70 Motherboard User Manual
28
LVDS1: LVDS
Pin
Signal Name
Pin
Signal Name
1
LCDVDD
2
LVDS0_TX0_N
3
LCDVDD
4
LVDS0_TX0_P
5
LCDVDD
6
LVDS0_TX1_N
7
GND
8
LVDS0_TX1_P
9
GND
10
LVDS0_TX2_N
11
GND
12
LVDS0_TX2_P
13
GND
14
LVDS0_CLK_N
15
GND
16
LVDS0_CLK_P
17
GND
18
LVDS0_TX3_N
19
GND
20
LVDS0_TX3_P
21
GND
22
LVDS1_TX0_N
23
GND
24
LVDS1_TX0_P
25
GND
26
LVDS1_TX1_N
27
GND
28
LVDS1_TX1_P
29
GND
30
LVDS1_TX2_N
31
GND
32
LVDS1_TX2_P
33
GND
34
LVDS1_CLK_N
35
GND
36
LVDS1_CLK_P
37
GND
38
LVDS1_TX3_N
39
GND
40
LVDS1_TX3_P
* Note: Please refer to CON1 settings to select POWER RATING
Page 37
IB70 Motherboard User Manual
29
LPT1: LPT
MINI PCIE1: WWAN
Pin №
Name
Pin №
Name
1
PCIE_WAKE#
2
+3.3V
3
NC
4
GND
5
BT_EN
6
+1.5V
7
CLK_OE#
8
USIM_PWR
9
GND
10
USIM_DATA
11
PCIE_CLKM
12
USIM_CLOCK
13
PCIE_CLKP
14
USIM_RESET
15
GND
16
USIM_VPP
Pin №
Name
Pin №
Name
1
LPT_STB#
2
LPT_PD0
3
LPT_PD1
4
LPT_PD2
5
LPT_PD3
6
LPT_PD4
7
LPT_PD5
8
LPT_PD6
9
LPT_PD7
10
ACK#
11
Busy
12
PE
13
SLCT
14
LPT_AFD#
15
ERR#
16
LPT_INIT#
17
LPT_SLIN#
18-25
GND
Page 38
IB70 Motherboard User Manual
30
17
NC
18
GND
19
NC
20
Wireless_ENABLE
21
GND
22
PCIE_RESET
23
PCIE_RXM
24
+3.3V
25
PCIE_RXP
26
GND
27
GND
28
+1.5V
29
GND
30
SMB_CLK
31
PCIE_TXM
32
SMB_DATA
33
PCIE_TXP
34
GND
35
GND
36
USB_D-
37
GND
38
USB_D+
39
+3.3V
40
GND
41
+3.3V
42
NC
43
GND
44
NC
45
NC
46
NC
47
NC
48
+1.5V
49
NC
50
GND
51
+3.3V
52
+3.3V
Page 39
IB70 Motherboard User Manual
31
MINI PCIE2: WIFI
Pin №
Name
Pin №
Name
1
PCIE_WAKE#
2
3.3V
3
NC
4
GND
5
BT_EN
6
+1.5V
7
CLK_SLOT2_OE#
8
NC
9
GND
10
NC
11
CLK_PCIE_SLOT2_N
12
NC
13
CLK_PCIE_SLOT2_P
14
NC
15
GND
16
NC
17
NC
18
GND
19
NC
20
3G_EN
21
GND
22
PCIE_RESET
23
PCIE2_RXN2
24
+3.3V
25
PCIE2_RXP2
26
GND
27
GND
28
+1.5V
29
GND
30
SMB_CLK
31
PCIE2_TXN2
32
SMB_DATA
33
PCIE2_TXP2
34
GND
35
GND
36
USB_D-
37
GND
38
USB_D+
39
3.3V
40
GND
41
3.3V
42
NC
43
GND
44
NC
45
NC
46
NC
47
NC
48
+1.5 V
49
NC
50
GND
51
3.3V
52
3.3V
M1
GND
M2
GND
Page 40
IB70 Motherboard User Manual
32
SATA1: SATA
SATA_PWR1: SATA Power
Pin
Name
Pin
Name
1
+12V
2
+12V
3
GND
4
GND
5
GND
6
GND
7
+5V
8
+5V
SIM1: Cable connector for SIM-100
Pin
Name
Pin
Name
1
GND
2
SATA_TXP
3
SATA_TXN
4
GND
5
SATA_RXN
6
SATA_RXP
7
GND
Pin
Name
Pin
Name
1
VREG_USIM
2
SIM_RESET
3
SIM_CLK
4
GND
5
SIM_VPP
6
SIM_DATA
Page 41
IB70 Motherboard User Manual
33
SSD1: mSATA
Pin
Name
Pin
Name
1
NC 2 +3.3V
3
NC 4 GND
5
NC 6 +1.5V
7
NC 8 NC
9
GND
10
NC
11
NC
12
NC
13
NC
14
NC
15
GND
16
NC
17
NC
18
GND
19
NC
20
NC
21
GND
22
NC
23
SATA_RXP
24
+3.3V
25
SATA_RXN
26
GND
27
GND
28
+1.5V
29
GND
30
SMB_Clock
31
SATA_TXN
32
SMB_Data
33
SATA_TXP
34
GND
35
GND
36
NC
37
GND
38
NC
39
+3.3V
40
GND
41
+3.3V
42
NC
43
GND
44
NC
45
NC
46
NC
47
NC
48
+1.5V
49
SSD_LED#
50
GND
51
NC
52
+3.3V
Page 42
IB70 Motherboard User Manual
34
USB2: Internal USB2.0
USB3: Internal USB2.0
Pin
Name
Pin
Name
1
+5V 2 +5V
3
USB_D- 4 USB_D-
5
USB_D+
6
USB_D+
7
GND 8 GND
Pin
Name
Pin
Name
1
+5V 2 +5V
3
USB_D- 4 USB_D-
5
USB_D+ 6 USB_D+
7
GND 8 GND
Page 43
IB70 Motherboard User Manual
35
3V1: 3.3V Output
5V1: 5V Output
5V2: 5V output
12V1: 12V Output
Pin
Name
1
+3.3V
2
GND
Pin
Name
1
+5V
2
GND
Pin
Name
1
+5V
2
GND
Pin
Name
1
+12V
2
GND
Page 44
IB70 Motherboard User Manual
36
Panel1: OSD Membrane Control
Pin
Name
Pin
Name
1
+5V
2
+3.3V
3
GND
4
HDD_LED
5
PWRBTN#
6
GND
7
GND/ Backlight ADJ+
8
Reset
9
NC/Backlight ADJ-
10
+5V
NOTE: Backlight ADJ+ / Backlight ADJ- optional functions
SYS_FAN: SYS_FAN1
Pin №
Name
Pin №
Name
1
GND
2
+12V
3
SENSE
Page 45
IB70 Motherboard User Manual
37
2.5.2 I/O Side Setting Description
The table below shows each of I/O side connectors and its functions.
Label
Function
Note
AUDIO
Line In/Line Out/Mic
AUDIO
COM1
Serial port (RS232/422/485)
D-Sub 9
COM3/ COM4
Serial port (RS232/422/485)
D-Sub 9
LAN1, LAN2
Gigabit Ethernet
RJ45+LED
PS/2
Mouse/Keyboard
MiniDIN-6P
USB
USB 2.0 / USB 3.0
USB Type A
VGA
Video Graphics Array
D-Sub 15
Audio: Line In/Line Out/Mic
COM1: D-Sub 9
Pin
RS232
RS422
RS485
1
DCD
TxD-
D- 2 RXD
TxD+
D+ 3 TXD
RxD+
NC 4 DTR
RxD-
NC 5 GND
GND
GND 6 DSR
NC
NC 7 RTS
NC
NC
8
CTS
NC
NC
9
RI
NC
NC
Page 46
IB70 Motherboard User Manual
38
COM3, COM4: Serial port (232)
Pin №
Name
Pin №
Name 1 DCD
2
DSR 3 RXD
4
RTS 5 TXD
6
CTS 7 DTR
8
RI 9 GND
10
GND
LAN1, LAN2: Gigabit Ethernet
Pin
Name
Pin
Name 1 TX1+
2
TX1- 3 TX2+
4
TX2-
5
TX3+
6
TX3-
7
TX4+
8
TX4-
PS/2: Mouse/Keyboard
Pin
Name
Pin
Name
1
+DATA
2
Reserved
3
GND
4
Vcc 5 +CLK
6
Reserved
Page 47
IB70 Motherboard User Manual
39
2 USB: USB 2.0 / USB 3.0
Pin
Name
Pin
Name
1
+5V 2 USB_D-
3
USB_D+ 4 GND
5
STDA_SSRX-
6
STDA_SSRX+
7
GND_DRAIN
8
STDA_SSTX-
9
STDA_SSTX+
10
+5V
11
USB_D-
12
USB_D+
13
GND
VGA: Video Graphic Array
Pin
Name
Pin
Name
1
DDC_DATA
2
+5V
3
DDC_CLOCK
4
RED
5
Horizontal Sync
6
GREEN
7
Vertical Sync
8
BLUE
9
GND
10
GND
Page 48
IB70 Motherboard User Manual
40
AMI BIOS Setup
This chapter contains BIOS Configuration and OS
Recovery information.
3.1 When and How to Use BIOS Setup
3.2 BIOS Functions
3.3 Using Recovery Wizard to Restore Computer
Page 49
IB70 Motherboard User Manual
41
Chapter 3 AMI BIOS SETUP
3.1 When and How to Use BIOS Setup
The BIOS Setup allows users to modify system configurations. To enter the BIOS setup,
you need to connect an external USB keyboard, press Del key when the prompt
appears on the screen during start up. The prompt screen shows only few seconds so
need press Del key quickly.
Note
Updated BIOS version may be published after the manual released.
Check the latest version of BIOS on the website.
You may need to run BIOS setup utility for reasons listed below:
1. Error message on screen indicates to check BIOS setup
2. Restoring the factory default settings.
3. Modifying the specific hardware specifications
4. Necessity to optimize specifications
BIOS Navigation Keys
The following keys are enabled during POST:
Key
Function
Del
Enters the BIOS setup menu.
F7
Display the boot menu. Lists all bootable devices that are
connected to the system. With cursor ↑and cursor ↓and by
pressing <ENTER>, select the device used for the boot.
Pause
Pressing the [Pause] key stops the POST. Press any other key to
resume the POST.
The following Keys can be used after entering the BIOS Setup.
Key
Function
F1
General Help
F2
Previous Values
F3
Optimized Defaults
F4
Save & Exit
Esc
Exit
+/-
Change Opt.
Enter
Select or execute command
Page 50
IB70 Motherboard User Manual
42
Cursor
Moves to the previous item
Cursor
Goes to the next item
Cursor
Moves to the previous item
Cursor
Goes to the next item
NOTE
You can press the F1, F2, F3, F4, –/+, and Esc keys by
connecting a USB keyboard to your computer.
3.2 BIOS Functions
3.2.1 Main Menu
The Main menu displays the basic information about yoursystem including BIOS
version, processor RC version, system language, time, and date.
When you enter BIOS setup, the first menu that appears on the screen is the main
menu.It contains the system information including BIOS version, processor RC version,
system language, time, and date.
<F1> General help. If you need any help regarding BIOS settings, simply press <F1>,
the help screen provide information on BIOS navigation, and possible selections of
highlighted items. Press <Esc> to exit General Help screen.
Page 51
IB70 Motherboard User Manual
43
BIOS Setting
Description
Setting Option
Effect
System
Language
Displays the system
language. [English] is set
up by default.
Adjustment of
the
language
Set the language in
other language. The
language in this
device is English.
System
Date/Time
This is current date
setting. The time is
maintained by the
battery when the device
is turned off.
Date and time
changes.
Set the date in the
format [mm/dd/yyyy];
The time in the format:
[hh/mm/ss]
Access Level
The current user access
settings
Changes to the
level of access
Administrator is set up
by the default
Page 52
IB70 Motherboard User Manual
44
3.2.2 Advanced Menu
The advanced menu also uses to set configuration of the CPU and other system
devices. There are sub menus on the left frame of the screen.
Note
Handle advanced BIOS settings page with caution. Any changes can affect the operation of your computer.
Page 53
IB70 Motherboard User Manual
45
BIOS Setting
Description
Setting
Option
Effect
ACPI Settings
Configures ACPI settings
Enter
Opens
submenu
F81866 Super IO
Configuration
Configures IO settings
Enter
Opens
submenu
Hardware Monitor
Configures Hardware Monitor
settings
Enter
Opens
submenu
S5 RTC Wake
Settings
Configures RTC Wake
parameters
Enter
Opens
submenu
CPU Configuration
Configures CPU settings
Enter
Opens
submenu
PPM Configuration
Configures PPM settings
Enter
Opens
submenu
Thermal
Configuration
Configures Thermal
Parameters
Enter
Opens
submenu
IDE Configuration
This option sets the operating
mode of the standard IDE
controller chipset.
Enter
Opens
submenu
Miscellaneous
Configuration
This option sets Miscellaneous
Configuration
Enter
Opens
submenu
CSM Configuration
This option sets the
Compatibility Support Module
(CSM) , a component of the
UEFI firmware that provides
legacy BIOS compatibility
Enter
Opens
submenu
USB Configuration
Configures USB settings
Enter
Opens
submenu
Platform Trust
Technology
This option sets Platform
Trust Technology parameters
Enter
Opens
submenu
Security
Configuration
This option sets Security
parameters
Enter
Opens
submenu
Intel Gigabit
Network Connection
Configures Gigabit Network
Connection settings
Enter
Opens
submenu
For items marked press <Enter> for more options.
Page 54
IB70 Motherboard User Manual
46
ACPI Settings
Advanced Configuration and Power Interface (ACPI) settings allow to control how the
power switch operates. The power supply can be adjusted for power requirements.
You can use the screen to select options of ACPI configuration. A description of the
selected items will appear on the right side of the screen.
BIOS Setting
Description
Setting
Option
Effect
Enable ACPI
Auto
Configuration
BIOS ACPI Auto Configuration
Enable/
Disable
Enables or
Disables this
function
Enable
Hibernation
Control hibernation
Enable/
Disable
Enables or
Disables this
function
ACPI Sleep
State
This option allows you to
specify which mode will be
used during the transition to
energy saving mode
S1 (POS)/
S3
(Suspend
to RAM)
Select ACPI
Sleeping State
Mode
Lock Legacy
Resources
This option enables or
disables lock of legacy
resources
Enable/
Disable
Enables or
Disables this
function
Page 55
IB70 Motherboard User Manual
47
Super IO Configuration
You can use the screen to select options for Super IO Configuration, and change the
value of the option selected. A description of the selected item appears on the right
side of the screen. For items marked with , please press <Enter> for more options.
Serial Port 1~5
Use these items to set parameters related to serial port 1~5.
Page 56
IB70 Motherboard User Manual
48
GPI0 Port Configuration
You can use the screen to change GPI0 Port setting. Use these items to set
parameters related to PIN3-PIN14 Control.
Watch Dog Time Select
You can either disable Watch Dog Time Select, or set up the time.Use <Arrow> keys
to navigate and please press <Enter> to select the item.
Page 57
IB70 Motherboard User Manual
49
Hardware Monitor
You can check PC Health Status parameters such as system temperature, fan speed
etc.
S5 RTC Wake Settings
Wake system from S5 enables or disables system wake on alarm event. It allows you
to wake up the system in a certain time.
Page 58
IB70 Motherboard User Manual
50
Wake system from S5 after fixed time setting
Select Fixed Time to set the system to wake on the specified time.
Use Navigation Keys to switch among the items: Day, Hour, Minute and
Second. Type the desired value in the selected item.
For example, if you want the system to start up automatically at 15:30:30, the 10th
day of each month, then you should enter 10, 15, 30, and 30 from top to bottom.
Page 59
IB70 Motherboard User Manual
51
Wake system from S5 after dynamic time setting
Select Dynamic Time to set the system to wake on the current time + increase
minute (s).
CPU Configuration
Press <Enter> to view current CPU configuration and make settings for the following
sub-items.
Page 60
IB70 Motherboard User Manual
52
BIOS Setting
Description
Setting Option
Effect
Socket CPU
Information
This item contains socket
specific CPU information.
Displays Socket
CPU Information
Displays Socket
CPU Information
CPU Thermal
Configuration
Thermal control
Auto/Disabled
Auto/Disable this
function
Limit CPUID
Maximum
Limits CPIID Maximum
Disabled/Enabled
Enable/Disable
this function
Execute Disable
Bit
Execute Disable Bit
Disabled/Enabled
Enable/Disable
this function
Intel
Virtualization
Technology
Allows to run recent OS
and applications
Enabled/Disabled
Enable/Disable
this function
Power
Technology
Control the performance
and power management
functions of the
processors
Disabled
Disable this
function
Energy Efficient
Work on energy
efficient mode
Page 61
IB70 Motherboard User Manual
53
PPM Configuration
BIOS Setting
Description
Setting
Option
Effect
CPU C State
Report
Shows CPU C State Report
Enabled/
Disabled
Enable or Disable CPU
C state report to OS
Max CPU
C-State
Allows to enter
power-saving mode in
order to save energy
C1E, C3,
C6, C7,
Auto
Enable or Disable CPU
C Max CPU S-Sate
Page 62
IB70 Motherboard User Manual
54
Thermal Configuration
BIOS Setting
Description
Setting Option
Effect
Critical Trip
Point
Allows you to set the
critical temperature of
the processor chip which
automatically reduce the
frequency of the
processor or turn on
throttling (skipping
beats).
Temperature
range
Select the temp.
Passive Trip
Point
Allows you to set the
passive trip temperature
of the processor chip
Temperature
range
Select the temp.
Page 63
IB70 Motherboard User Manual
55
IDE Configuration
BIOS Setting
Description
Setting
Option
Effect
Serial- ATA (SATA)
Responsible for supporting
chipset drives with SATA
interface.
Enabled/
Disabled
Enable or disable this
function
SATA Speed
Support
Allows forcing the speed
limit SATA II ports standard
IDE / SATA-controller
chipset.
Gen1
The maximum speed will
be limited to 150 MB/s
Gen2
The maximum speed will
be limited to 300 MB/s
Disabled
Disables manual
configuration of SATA II
ports (mode will be
selected based on the
specifications of
connected drives)
SATA Mode
This option specifies the
operation mode of modern
IDE / SATA-controller
[AHCI]
Selecting this option
allows you to take full
advantage of the
Page 64
IB70 Motherboard User Manual
56
chipset
extended host controller
SATA II
[IDE]
SATA controller will
operate in a mechanism
similar to a conventional
IDE-controller
[RAID]
Allows combining hard
drives in RAID-arrays in
order to improve the
reliability of data
storage, or to increase
the speed.
Serial- ATA Port 0
The option turns on or off
Port 0 of SATA channels of
standard IDE /
SATA-controller chipset.
Enabled/
Disabled
Turn on (Enabled) or
turn off (Disabled) Port 0
SATA Port0
HotPlug
This feature that allows
you to attach and remove
a SATA Port0
Enabled/
Disabled
Enable or disable this
function
Serial- ATA Port 1
The option turns on or off
Port 1 of SATA channels of
standard IDE /
SATA-controller chipset.
Enabled/
Disabled
Turn on (Enabled) or
turn off (Disabled) Port 1
SATA Port1
HotPlug
This feature that allows
you to attach and remove
a SATA Port1
Enabled/
Disabled
Enable or disable this
function
Page 65
IB70 Motherboard User Manual
57
Miscellaneous Configuration
OS Selection
This item allows users to select the proper Operating System.
BIOS Setting
Description
Setting
Option
Effect
Windows 8.X
Allows user to choose the
proper OS.
Enter
Use Windows 8.X
Windows 7
Allows user to choose the
proper OS.
Enter
Use Windows 7
Page 66
IB70 Motherboard User Manual
58
CSM Configuration
BIOS Setting
Description
Setting
Option
Effect
CSM
Support
The Compatibility Support Module
(CSM) is a component of the UEFI
firmware that provides legacy
BIOS compatibility by emulating a
BIOS environment, allowing legacy
operating systems and some
option ROMs that do not support
UEFI to still be used.
Enabled/
Disabled
Enable or
disable the
Compatibility
Support
Module
GetaA20
Active
Activate GetaA20
Upon
Request
Enable or
disable this
function
Option ROM
Messages
Receiving ROM Messages Settings
Force BIOS
Set ROM
messages
parameters
Network
Specifies which Network option
UEFI
Only UEFI
Page 67
IB70 Motherboard User Manual
59
ROM is booted
option ROMs
are booted
Legacy
Storage
Specifies which Storage option
ROM is booted
UEFI
Only UEFI
option ROMs
are booted
Legacy
Only Legacy
option ROMs
are booted
Video
Specifies which Video option ROM
is booted
UEFI
Only UEFI
option ROMs
are booted
Legacy
Only Legacy
option ROMs
are booted
Other PCI
Devices
Specifies which option ROM is
booted for devices other than the
network, storage or video
UEFI
Only UEFI
option ROMs
are booted
Legacy
Only Legacy
option ROMs
are booted
Page 68
IB70 Motherboard User Manual
60
USB Configuration
Page 69
IB70 Motherboard User Manual
61
BIOS Setting
Description
Setting
Option
Effect
Legacy USB
Support
User can enable or disable
USB port.
Disable
Will keep USB
devices available
only for EFI
applications.
Enable
Enable all the USB
devices
USB 3.0 Support
User can enable or disable
USB 3.0 (XHCI) controller
support.
Enable
Enable USB 3.0 is
enable
Disable
USB 3.0 is disable
XHCI Hand‐off
This is a workaround for OSs
without XHCI hand‐ off
support.
Disable
Disables this
function
Enable
Enables this function
EHCI Hand‐off
This is a workaround for OSs
without ECHI hand‐ off
support.
Disable
Disables this
function
Enable
Enables this function
USB mass
storage driver
support
User can Enable or disable
USB mass storage driver
support.
Disable
Disables this
function
Enable
Enables this function
USB Transfer
time‐ out
The time‐out value for
control, bulk, and interrupt
transfers.
1 Sec
5 Sec
10 Sec
20 Sec
Depends on the
time‐out value
Device Reset
time‐ out
USB mass storage device
start unit command time‐
out.
10 Sec
20 Sec
30 Sec
40 Sec
Depends on the
time‐out value
Device
power‐up delay
Maximum time the device
will take before it properly
reports itself to the host
controller.
Auto
Uses default value:
for a root port it is
100 ms, for a Hub
port the delay is
taken from Hub
descriptor
Page 70
IB70 Motherboard User Manual
62
Platf orm Trust Technology
BIOS Setting
Description
Setting Option
Effect
fTPM
Trusted Platform Module
parameters
Enabled/Disabled
Enables or
disables this
function
Page 71
IB70 Motherboard User Manual
63
Security Configuration
BIOS Setting
Description
Setting Option
Effect
TXE
Trusted Execution
Technology parameters
Enabled/
Disabled
Enables or disables
this function
TXE HMRFPO
TXE HMRFPO parameters
Enabled/
Disabled
Enables or disables
this function
TXE
Firmware
Update
TXE Firmware Update
parameters
Enabled/
Disabled
Enables or disables
this function
TXE EOP
Message
TXE EOP Message
parameters
Enabled/
Disabled
Enables or disables
this function
Intel ® AT
Intel ® AT parameters
Enabled/
Disabled
Enables or disables
this function
Intel ® AT
Platform PBA
Intel ® AT Platform PBA
parameters
Enabled/
Disabled
Enables or disables
this function
Page 72
IB70 Motherboard User Manual
64
3.2.3 Chipset Menu
Chipset Menu includes displays about PCI Express Settings,
USB Configuration
Displays USB Configuration Settings
PCI Express Configuration
BIOS
Setting
Description
Setting
Option
Effect
High
Precious
Timer
Allow to set up High Precious Timer
settings
Enabled/
Disabled
Enables/
Disables this
function
Restore AC
Power Loss
This function allows to set up booting
options after a power failure
Power on/
Power off
Boot
automatically
after a power
failure
Serial IRQ
Mode
When working with personal computer
hardware, installing and removing devices,
the system relies on interrupt requests.
Continuous
Allow user to
set up desired
IRQ Mode
Page 73
IB70 Motherboard User Manual
65
3.2.4 Security Menu
In the Security menu, users can set administrator password, user password, and HDD
security configuration.
BIOS Setting
Description
Setting
Option
Effect
Administrator
Password
Displays whether or not an
administrator password has been set.
Enter
Enter password
User
Password
Display whether or not a user
Password has been set.
Enter
Enter password
Page 74
IB70 Motherboard User Manual
66
3.2.5 Boot Configuration
The Boot menu sets the sequence of the devices to be searched for the operating
system. The bootable devices will be automatically detected during POST and shown
here, allowing you to set the sequence that the BIOS use to look for a boot device
from which to load the operating system.
BIOS Setting
Description
Setting
Option
Effect
Setup Prompt
Timeout
Allows user to configure the
number of seconds to stay in BIOS
setup prompt screen.
Enter
Set the prompt
timeout
Boot
NumLock
State
Enables or disables NumLock
feature on the numeric keypad of
the keyboard after the POST
(Default: On).
On
Remains On
Off
Remains OFF
Quite Boot
Determines if POST message or
OEM logo (default = Black
background) is displayed.
Disabled
Disables this
function
Enabled
Enables this
function
Page 75
IB70 Motherboard User Manual
67
Fast Boot
Enables or disables Fast Boot to
shorten the OS boot process.
(Default: Disabled).
Disabled
Disables this
function
Enabled
Enables this
function
Boot Option
Priorities
Specifies the overall boot order
from the available devices
Ex: Boot
Option#1
(hard
drive)
Hard drive as the
first priority
Hard Drive
BBS Priorities
Specifies the boot order for a
specific device type, such as hard
drives, optical drives, floppy disk
drives, and devices that support
Boot from LAN function
Enter
Enter the
submenu that
present the
devices of the
same type are
connected.
3.2.6 Save & Exit
The Exit menu displays a way how to exit BIOS Setup utility. After finishing your
settings, you must save and exit for changes to be applied.
Page 76
IB70 Motherboard User Manual
68
BIOS Setting
Description
Setting
Option
Effect
Save Changes
and Exit
This saves the changes to the CMOS and
exits the BIOS Setup program.
<YES>
Save changes
Discard
Changes and
Exi
This exits the BIOS Setup without saving
the changes made in BIOS Setup to the
CMOS.
<YES>
Saves the
changes
<NO>
Return to the
BIOS Setup
Main Menu
Save Changes
and Reset
Reset the system after saving the
changes.
<YES>
Saves the
changes
<NO>
Return to the
BIOS Setup
Main Menu
Discard
Changes and
Reset
Reset system setup without saving any
changes
<YES>
Saves the
changes
<NO>
Return to the
BIOS Setup
Main Menu
Save Changes
Save changes done so far to any of the
setup options.
<YES>
Saves the
changes
<NO>
Return to the
BIOS Setup
Main Menu
Discard
Changes
Discard changes done so far to any of the
setup options.
<YES>
Saves the
changes
<NO>
Return to the
BIOS Setup
Main Menu
Restore
Default
Restore/load default values for all the
setup options.
<YES>
Saves the
changes
<NO>
Return to the
BIOS Setup
Main Menu
Save as User
Defaults
Save the changes done so far as User
defaults.
<YES>
Saves the
changes
Page 77
IB70 Motherboard User Manual
69
<NO>
Return to the
BIOS Setup
Main Menu
Restore User
Defaults
Restore the User Defaults to all the setup
options.
<YES>
Saves the
changes
<NO>
Return to the
BIOS Setup
Main Menu
Page 78
IB70 Motherboard User Manual
70
3.3 Using Recovery Wizard to Restore Computer
Bay Trail Intel® Celeron N2930 series computer has a dedicate recovery partition
stored on the hard drive of the PC to enable quick one-key recovery process. This
partition occupies about 11GB of the storage space, and comes built-in to each IB70
series PC.
Before starting the recovery process, be sure to backup all user
data, as all data will be lost after the recovery process.
Follow the procedure below to enable quick one-key recovery procedure:
Plug-in the AC adapter to Bay Trail series computer. Make sure the
computer stays plugged in to power source during the recovery process.
Turn on the computer, and when the boot screen shows up, press the F6
to initiate the Recovery Wizard.
The following screen shows the Recovery Wizard. Click Recovery button to
continue.
A warning message about data loss will show up. Make sure the data is backed up
before recovery, and click Yes to continue.
Page 79
IB70 Motherboard User Manual
71
Wait the recovery process to complete. During the recovery process, a command
prompt will show up to indicate the percent of recovery process complete. The
tablet computer will restart automatically after recovery completed.
Page 80
IB70 Motherboard User Manual
72
Driver Installation
This chapter offers information on all of the
recommend driver installation.
Sections include:
4.1 Intel Chipset Driver Installation
4.2 Graphics Driver Installation
4.3 Audio Driver Installation
4.4 Ethernet Driver Installation
4.5 Intel Sideband Fabric Device (MBI) Installation (for Windows 8)
4.6 Intel Trusted Engine Interface (TXE) Installation
4.7 Fintek COM Port Driver Installation
4.8 USB 3.0 Driver Installation (for Windows 7)
Page 81
IB70 Motherboard User Manual
73
Chapter 4 Driver Installation
4.1 Intel Chipset Driver Installation
Step 1 Insert the CD that comes with the motherboard. Open the file document
“Chipset Driver” and click on “infinst_auto.exe” to install the driver.
Step 2 Click “Next to continue the installation.
Page 82
IB70 Motherboard User Manual
74
Step 3 Click Yes to agree with the license terms.
Step 4 Click Next to continue.
Page 83
IB70 Motherboard User Manual
75
Step 5 Please wait for the following operations to be performed.
Step 6 Click Next to continue.
Page 84
IB70 Motherboard User Manual
76
Step 7 Select “Yes, I want to restart this computer now”, and click “Next to finish
the installation.
Page 85
IB70 Motherboard User Manual
77
4.2 Graphics Driver Installation
Step 1 Insert the CD that comes with the motherboard. Open the file document
“Graphics Driver” and click “Setup.exe” to install the driver.
Step 2 Click “Next to continue the installation.
Page 86
IB70 Motherboard User Manual
78
Step 3 Click Yes to agree with the license terms.
Step 4 Click Next to continue the installation.
Page 87
IB70 Motherboard User Manual
79
Step 5 Click Next to continue the installation.
Step 6 Click Next to continue the installation.
Page 88
IB70 Motherboard User Manual
80
A warning message will appear on the screen, click on “install this driver software
anyway” to continue the installation.
Step 7 Please wait for the following operations to be performed.
Page 89
IB70 Motherboard User Manual
81
Step 8 Click Next to continue the installation.
Step 9 Click “Yes, I want to restart this computer now” to finish the installation and
restart the computer.
Page 90
IB70 Motherboard User Manual
82
4.3 Audio Driver Installation
Step 1 Insert the CD that comes with the motherboard. Open the file document
“Audio Driver” and click on “Setup.exe” to install the driver.
Step 2 Wait while setup is preparing the installation.
Page 91
IB70 Motherboard User Manual
83
Step 3 Click Next to continue the installation.
Step 4 Please wait for the driver to configure your new software installation.
Page 92
IB70 Motherboard User Manual
84
Step 5 Windows security warning message will pop-up, mark “Always trust software
from “Realtek Semiconductor Corp” and click Install.
Step 6 Select “Yes, I want to restart my computer now”, and then press finish to
complete the installation.
Page 93
IB70 Motherboard User Manual
85
4.4 Ethernet Driver Installation
The users must confirm which operating system is used on the IH32 Motherboard
before installing the Ethernet drivers. Follow the steps below to complete the
installation of the Intel® I210IT Gigabit-LAN Controller + I218LM Gigabit-LAN drivers.
You will quickly complete the installation.
Step 1 Insert the driver CD and select the “LAN Driver” folder.
Page 94
IB70 Motherboard User Manual
86
Step 2 Extract the “PROWinX64_19.0” file and click “Next to install the driver.
Step3 Click Next to agree with the license terms.
Page 95
IB70 Motherboard User Manual
87
Step 4 Click Next to install the driver.
Step 5 Click Finish to complete the driver installation.
Page 96
IB70 Motherboard User Manual
88
4.5 Intel Sideband Fabric Device (Intel MBI) Driver Installation
(for Windows 8)
Step 1 Insert the CD that comes with the motherboard. Open the file document
“MBI” and click on “Setup.exe” to install the driver.
Step 2 Click “Next to continue the driver installation.
Page 97
IB70 Motherboard User Manual
89
Step 3 Click Yes to agree with the license terms.
Step 4 Please wait while the following setup operations are performed.
Page 98
IB70 Motherboard User Manual
90
Step 5 It may take some time for the following setup operations to be performed.
Step 6 Select “Yes, I want to restart this computer now”, and then click Finish to
complete the installation.
Page 99
IB70 Motherboard User Manual
91
4.6 Intel Trusted Engine Interface TXE Installation
Step 1 Insert the CD that comes with the motherboard. Open the file document
“TXE” and click on “Setup TXE.exe” to install driver.
Step 2 Click “Next to continue the installation.
Page 100
IB70 Motherboard User Manual
92
Step 3 Click Next to agree with the license terms.
Step 4 Click Next to continue the installation.
Loading...