Winmate Full IP65, R15ID3S-65A1FTE, R15ID3S-65A1FT User Manual

Flat Stainless

Panel PC

Intel® Atom ™ N2600 1.6 GHz

Full IP65

R15ID3S-65A1FTE
R15ID3S-65A1FTP

User Manual

Version 1.0

USER MANUAL PREFACE

ii

IP65 FLAT STAINLESS PANEL PC

PREFACE

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any
form or by any means, electronic or mechanical, for any purpose, without the prior
written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective
owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to any product, including
circuits and/or software described or contained in this manual in order to improve design
and/or performance. We assume no responsibility or liability for the use of the described
product(s) conveys no license or title under any patent, copyright, or masks work rights to
these products, and make no representations or warranties that these products are free
from patent, copyright, or mask work right infringement, unless otherwise specified.
Applications that are described in this manual are for illustration purposes only. We make
no representation or guarantee that such application will be suitable for the specified use
without further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer
discovers a defect, we will, at his/her option, repair or replace the defective product at no
charge to the customer, provide it is returned during the warranty period of one year,
with transportation charges prepaid. The returned product must be properly packaged in
its original packaging to obtain warranty service. If the serial number and the product
shipping data differ by over 30 days, the in-warranty service will be made according to
the shipping date. In the serial numbers the third and fourth two digits give the year of
manufacture, and the fifth digit means the month (e. g., with A for October, B for
November and C for December).

For example, the serial number 1W16Axxxxxxxx means October of year 2016.

USER MANUAL PREFACE

IP65 FLAT STAINLESS PANEL PC

iii

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website
of our distributor to find the update information about the product. Second, contact with
your distributor, sales representative, or our customer service center for technical
support if you need additional assistance.
You may need the following information ready before you call:

 Product serial number
 Software (OS, version, application software, etc.)
 Description of complete problem
 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We
are always ready to give advice on application requirements or specific information on
the installation and operation of any of our products.

USER MANUAL PREFACE

iv

IP65 FLAT STAINLESS PANEL PC

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful
information or to alert you to the potential for hardware damage or personal injury. These
are Notes, Important, Cautions, and Warnings. The following is an example of each type of
advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to
avoid the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et

explique comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.
Un Avertissement de Choc Électrique indique le potentiel de chocs sur des
emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!
The Protective Conductor Terminal (Earth Ground) symbol indicates the
potential risk of serious electrical shock due to improper grounding.
Le symbole de Mise à Terre indique le risqué potential de choc électrique
grave à la terre incorrecte.

USER MANUAL PREFACE

IP65 FLAT STAINLESS PANEL PC

v

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges. Only experienced electronics
personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque

l’alimentation est présente. Des composantes électroniques sensibles
peuvent être endommagées par des sauts d’alimentation. Seulement

du personnel expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION
Always ground yourself to remove any static charge before touching

the CPU card. Modern electronic devices are very sensitive to static
electric charges. As a safety precaution, use a grounding wrist strap at
all times. Place all electronic components in a static-dissipative surface
or static-shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements électroniques

moderns sont très sensibles aux décharges d’électricité statique.

Toujours utiliser un bracelet de mise à la terre comme précaution.
Placer toutes les composantes électroniques sur une surface conçue
pour dissiper les charge, ou dans un sac anti-statique lorsqu’elles ne
sont pas dans le chassis.

USER MANUAL PREFACE

vi

IP65 FLAT STAINLESS PANEL PC

Safety Precautions

For your safety carefully read all the safety instructions before using the device.
Keep this user manual for future reference.

 Always disconnect this equipment from any AC outlet before cleaning. Do not

use liquid or spray detergents for cleaning. Use a damp cloth.

 For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

 Keep this equipment away from humidity.
 Put this equipment on a reliable surface during installation. Dropping it or

letting it fall could cause damage.

 The openings on the enclosure are for air convection and to protect the

equipment from overheating.

CAUTION/ATTENTION
Do not cover the openings!
Ne pas couvrir les ouvertures!

 Before connecting the equipment to the power outlet make sure the voltage

of the power source is correct.

 Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

 If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient over-voltage.

 Never pour any liquid into an opening. This could cause fire or electrical

shock.

 Never open the equipment. For safety reasons, only qualified service

personnel should open the equipment.

 All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following
problems appear:

 The power cord or plug is damaged.
 Liquid has penetrated into the equipment.
 The equipment has been exposed to moisture.
 The equipment does not work well or you cannot get it to work

according to the user manual.

 The equipment has been dropped and damaged.
 The equipment has obvious signs of breakage.

 Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the
equipment.

USER MANUAL PREFACE

IP65 FLAT STAINLESS PANEL PC

vii

CAUTION/ATTENTION
Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque de

blessure.

WARNING! / AVERTISSEMENT!
Only use the connection cords that come with the product. When in
doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le produit.

Si vous doutez de leur provenance, contactez le manufacturier.

WARNING!/ AVERTISSEMENT!
Always ground yourself against electrostatic damage to the device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se

décharge pas sur vous.

o Cover workstations with approved anti-static material. Use a wrist

strap connected to a work surface and properly grounded tools and
equipment.

o Use anti-static mats, heel straps, or air ionizer for added protection.
o Handle electrostatic-sensitive components, PCB’s and assemblies

by the case or the edge of the board.

o Avoid contact with pins, leads, or circuitry.
o Turn off power and input signals before inserting and removing

connectors or test equipment.

o Keep the work area free of non-conductive materials, such as

ordinary plastic assembly aids and Styrofoam.

o Use filed service tools, such as cutters, screwdrivers, and vacuum

cleaners that are conductive.

o Always put drivers and PCB’s component side on anti-static foam.

USER MANUAL PREFACE

viii

IP65 FLAT STAINLESS PANEL PC

Important Information

Countries/ Area

Symbol

This equipment complies with essential
requirements of:

European Union

Electromagnetic Compatibility
Directive(2014/30/EU)
Low Voltage Directive (2014/35/EU)
Restrictions of the use of certain hazardous
substances (RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at him own expense.
.

USER MANUAL PREFACE

IP65 FLAT STAINLESS PANEL PC

ix

European Union

This equipment is in conformity with the requirement of the following EU legislations
and harmonized standards. Product also complies with the Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

1. EN55024: 2010/ A1: 2015
a. IEC61000-4-2: 2009
b. IEC61000-4-3: 2006+A1: 2007+A2: 2010
c. IEC61000-4-4: 2012
d. IEC61000-4-5: 2014
e. IEC61000-4-6: 2014
f. IEC61000-4-8: 2010
g. IEC61000-4-11: 2004

2. EN55032: 2012/AC:2013

3. EN61000-3-2:2014

4. EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

1. EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

USER MANUAL ABOUT THIS USER MANUAL

ABOUT THIS USER MANUAL

This User Manual provides information about using the Winmate® IP65 Flat Stainless Panel PC
with Intel® Atom ™ N2600 1.6 GHz processor. This User Manual applies to the IP65 Flat
Stainless Panel PC – R15ID3S-65A1FTE, R15ID3S-65A1FTP.

The documentation set for the IP65 Flat Stainless Panel PC provides information for specific
user needs, and includes:

2. IP65 Flat Stainless Panel PC User Manual – contains detailed description on how to use

the Panel PC, its components and features.

3. IP65 Flat Stainless Panel PC Quick Start Guide - contains detailed description on how to

use the Panel PC, its components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual product.

Revision History

Version

Date

Note

1.0

6-Mar-2017

Initial release

USER MANUAL CONTENTS

CONTENTS

PREFACE ......................................................................................................................... ii

ABOUT THIS USER MANUAL ............................................................................................. i

CHAPTER 1: INTRODUCTION ............................................................................................ 2

1.1 Product Features .................................................................................................... 2

1.2 Package Content .................................................................................................... 3

1.3 Description of Parts................................................................................................ 4

1.3.1 Front View ................................................................................................... 4

1.3.2 Side and Rear Views .................................................................................... 4

1.3.3 Dimensions .................................................................................................. 5

1.4 Physical Buttons and LED Indicators ...................................................................... 5

CHAPTER 2: GETTING STARTED ........................................................................................ 8

2.1 Turning On ............................................................................................................. 8

2.2 Installation ............................................................................................................. 9

2.2.1 Wiring Requirements .................................................................................. 9

2.2.2 Connecting the Interface ........................................................................... 10

2.2.3 Connecting to Other Devices ..................................................................... 11

2.2.4 Connector Pin Assignments ....................................................................... 12

CHAPTER 3: OPERATING THE DEVICE ............................................................................. 17

3.1 Operating System ................................................................................................. 17

3.2 Multi-Touch .......................................................................................................... 18

3.3 How to Enable Watchdog .................................................................................... 19

CHAPTER 4: AMI BIOS SETUP ......................................................................................... 22

4.1 When and How to Use BIOS Setup ...................................................................... 22

4.2 BIOS Functions ..................................................................................................... 24

4.2.1 Main Menu ................................................................................................ 24

4.2.2 Advanced Menu ........................................................................................ 26

4.3 Chipset .......................................................................................................... 40

4.4 Boot .............................................................................................................. 44

4.5 Security ......................................................................................................... 47

4.6 Save & Exit .................................................................................................... 48

USER MANUAL PREFACE

IP65 FLAT STAINLESS PANEL PC

iii

CHAPTER 5: DRIVER INSTALLATION ............................................................................... 51

5.1 Chipset Driver Installation ................................................................................... 51

5.1.1 Standard CMOS Features .......................................................................... 51

5.2 Graphic Driver Installation ................................................................................... 54

5.2.1 Standard CMOS Feature ............................................................................ 54

5.2.2 Panel Resolution Setting ........................................................................... 57

5.3 Ethernet Driver Installation ................................................................................. 60

5.4 Audio Driver Installation ...................................................................................... 63

5.5 Fintek COM Port Driver Installation ..................................................................... 64

CHAPTER 6: MOUNTING ................................................................................................ 67

6.1 Cable Mounting Considerations .......................................................................... 67

6.2 Safety Precautions ............................................................................................... 68

6.3 Mounting Guide ................................................................................................... 69

6.3.1 VESA Mounting .......................................................................................... 69

6.3.2 Rear Mounting ........................................................................................... 70

CHAPTER 7: TECHNICAL SUPPORT .................................................................................. 73

7.1 Software Developer Support ............................................................................... 73

7.1.1 Winmate Download Center ....................................................................... 73

7.1.2 Winmate File Share ................................................................................... 73

7.2 Problem Report Form .......................................................................................... 74

APPENDIX A: PRODUCT SPECIFICATIONS ....................................................................... 76

APPENDIX B: ORDERING INFORMATION ........................................................................ 78

USER MANUAL CHAPTER 1 INTRODUCTION

IP65 FLAT STAINLESS PANEL PC

1

INTRODUCTION

This chapter gives you product overview,
describes features and hardware
specification. You will find all accessories
that come with the device in the packing
list. Mechanical dimensions and drawings
included in this chapter.

USER MANUAL CHAPTER 1 INTRODUCTION

2

IP65 FLAT STAINLESS PANEL PC

CHAPTER 1: INTRODUCTION

Winmate® IP65 Flat Stainless Panel PC is rugged, industrial-grade panel PC series built to
withstand challenging environments, undergoing rigorous testing to ensure safety and
top performance. All of the models in the series are sealed to IP65 standard. Stainless
housing features anti-corrosion properties making it suitable for food, chemical and
pharmaceutical industries.

Winmate® IP65 Flat Stainless Panel PC goes beyond that of the standard industrial panel
computers with elegant, edge-to-edge design, rugged construction, powerful
performance, and flexible mounting options.

1.1 Product Features

Winmate® IP65 Flat Stainless Panel PC features:

1. Intel® Atom ™ N2600 1.6 GHz

2. NEMA 4 IP65 compliant

3. Robust and fanless design for reliable operation

4. Fanless Cooling System and Ultra Low power consumption

5. Stainless Housing suitable for food processing and pharmaceutical industries

6. Easy-to-maintain Flat Touch Design

7. ELO 5W Resistive Touch or Projected Capacitive Multi-Touch (P-CAP)

User Manual Chapter 1 Introduction

IP65 FLAT STAINLESS PANEL PC

3

1.2 Package Content

Carefully remove the box and unpack your Panel PC. Please check if all the items listed
below are inside your package. If any of these items are missing or damaged contact us
immediately.

Standard factory shipment list

Panel PC

IP65 Flat Stainless Panel

PC Quick Start Guide

(Hardcopy)

Driver CD & User Manual

Varies by product

specifications

9152111I101X

ID31: 9171111I101L

AC Adapter

Power Cable*

Serial Cable

80W 90PO12080003

Varies by destination

94G0103090Q0

Ethernet Cable

USB Cable

VESA Screws

94I0080080KF

9480108080Q0

913511101101

USER MANUAL CHAPTER 1 INTRODUCTION

4

IP65 FLAT STAINLESS PANEL PC

1.3 Description of Parts

This section contains mechanical drawing of the Panel PC. Notice that this is
a simplified drawing and some components are not marked in detail.

1.3.1 Front View

1.3.2 Side and Rear Views

User Manual Chapter 1 Introduction

IP65 FLAT STAINLESS PANEL PC

5

1.3.3 Dimensions

Unit: mm

Dimensions: 396 x 310 x 49 mm

1.4 Physical Buttons and LED Indicators

Physical buttons and LED indicators located on the rear side of the Panel PC.

Physical Buttons

Icon

Button

Description

Reset

Press to reset the system

Power On/

Off

Press to power on or power off the device

USER MANUAL CHAPTER 1 INTRODUCTION

6

IP65 FLAT STAINLESS PANEL PC

LED Indicators

LED Type

Status

Description

On

Power is on

Off

Power is off

Blinking

Storage activity (Data is being read or written)

Off

System is idle

USER MANUAL CHAPTER 2 GETTING STARTED

IP65 FLAT STAINLESS PANEL PC

7

GETTING STARTED

This chapter tells you important information on
power supply, adapter and precautions tips.
Pay attention to power considerations.

USER MANUAL CHAPTER 2 GETTING STARTED

8

IP65 FLAT STAINLESS PANEL PC

CHAPTER 2: GETTING STARTED

This chapter provides information on how to connect the Panel PC to the source of
power, connector pinouts and the guideline to turn on/off the Panel PC.

2.1 Turning On

1. Remove the protective cap of the DC IN jack.

2. Plug the AC adapter to the DC IN jack of your device. Make sure the cable fits to

the connector, then tighten the O-ring (by turning clockwise) to secure the
connection.

3. Connect the AC adapter to the power cord.

4. Plug the power cord to an electrical outlet.

5. Press the Power button to turn on the device.

NOTE:

When the system hangs, press the Reset button to restart the device.

User Manual Chapter 2 Getting Started

IP65 Flat Stainless Panel PC

9

2.2 Installation

2.2.1 Wiring Requirements

The following common safety precautions should be observed before installing any
electronic device:

 Strive to use separate, non-intersecting paths to route power and networking

wires. If power wiring and device wiring paths must cross make sure the wires
are perpendicular at the intersection point.

 Keep the wires separated according to interface. The rule of thumb is that wiring

that shares similar electrical characteristics may be bundled together.

 Do not bundle input wiring with output wiring. Keep them separate.
 When necessary, it is strongly advised that you label wiring to all devices in the

system.

CAUTION

1 Do not run signal or communication wiring and power wiring in the same conduit. To

avoid interference, wires with different signal characteristics (i.e., different interfaces)
should be routed separately.

2 Be sure to disconnect the power cord before installing and/or wiring your device.
3 Verify the maximum possible current for each wire gauge, especially for the power

cords. Observe all electrical codes dictating the maximum current allowable for each
wire gauge.

4 If the current goes above the maximum ratings, the wiring could overheat, causing

serious damage to your equipment.

5 Be careful when handling the unit. When the unit is plugged in, the internal

components generate a lot of heat which may leave the outer casing too hot to
touch.

USER MANUAL CHAPTER 2 GETTING STARTED

10

IP65 FLAT STAINLESS PANEL PC

2.2.2 Connecting the Interface

This Panel PC comes with various interfaces located on the bottom panel. All of these
connectors have been shipped with protective caps. To ensure the waterproof function
can work properly, make sure that the protective caps have been securely fastened
whenever the connectors are not used.

IMPORTANT

Please note that when reinstalling the protective cap, it must be fully
tightened to ensure the unit is properly sealed to meet the IP65 enclosure
rating.

User Manual Chapter 2 Getting Started

IP65 Flat Stainless Panel PC

11

2.2.3 Connecting to Other Devices

Perform the connections as shown below.

USER MANUAL CHAPTER 2 GETTING STARTED

12

IP65 FLAT STAINLESS PANEL PC

2.2.4 Connector Pin Assignments

This Panel PC is equipped with four connectors which are IP65 level and fool-proofing
design. Use only the cables that are included in the package. The pin assignments of the
cables are as follows.

2.2.4.1 Power Cable

The Flat Stainless Panel PC has IP65 connector. Use power cable to connect Panel PC to
the source of power.

Flat Stainless Panel PC support 12V DC power input.

User Manual Chapter 2 Getting Started

IP65 Flat Stainless Panel PC

13

2.2.4.2 Serial Cable

The Flat Stainless Panel PC has IP65 serial port connector. Use serial cable to connect
serial interfaces.

USER MANUAL CHAPTER 2 GETTING STARTED

14

IP65 FLAT STAINLESS PANEL PC

2.2.4.3 Ethernet Cable

The Flat Stainless Panel PC has IP65 Ethernet connector. Use Ethernet cable to connect
the Panel PC to the Internet.

User Manual Chapter 2 Getting Started

IP65 Flat Stainless Panel PC

15

2.2.4.4 USB 2.0 Cable

Flat Stainless Panel PC has one Full IP65 USB2.0 connector. Use USB2.0 cable to connect
external devices such as mouse or keyboard to the Panel PC.

USER MANUAL CHAPTER 3 OPERATING THE DEVICE

16

IP65 FLAT STAINLESS PANEL PC

OPERATING THE DEVICE

This chapter provides detailed information
on how to operate the device. If you have
been using touch-screen Panel PCs before,
the interface may look familiar. Sections

include system settings parameters.

USER MANUAL CHAPTER 3 OPERATING THE DEVICE

IP65 Flat Stainless Panel PC

17

CHAPTER 3: OPERATING THE DEVICE

In this chapter you will find instructions on how to operate the Panel PC with Hot Tab.

3.1 Operating System

Flat Stainless Panel PC support several versions of Windows OS: Windows 10 IoT
Enterprise, Windows Embedded 8.1 Industry Pro, Windows Embedded 8 Standard,
Windows 7 Pro for Embedded Systems, and Windows Embedded Standard 7 – WS7P.

IMPORTANT:

The device is shipped with the OS System according to your order. Contact
us if you have any questions regarding OS settings.

User Manual Chapter 3 Operating the Device

18

IP65 FLAT STAINLESS PANEL PC

3.2 Multi-Touch

The P-CAP touchpad supports the core gestures for Windows.

Gesture

Windows

Usage

Gesture Action

Action

Tap/
Double-tap

Click /
Double-click

Click or double-click

Panning
with Inertia

Scrolling

Drag one or two
fingers up and
down

Selection/D
rag

(left to right
with one
finger)

Mouse-drag/
Selection

Drag one finger
left/right

Zoom

Zoom (default
to CTRL key +
scroll wheel)

Move two fingers
apart/ toward each
other

Rotate

No system
default unless
handled by
Application
(using
WM_Gesture
API)

Move two fingers
in opposite
directions

or

Use one finger to
pivot around
another

Two-Finger
tap

N/A - Exposed
through
Gesture API,
used by
Application
discretion

Tap two fingers at
the same time
(where the target is
the midpoint
between fingers)

Press and
Hold

Right-click

Press, wait for
blue-ring animation
to complete, then
release

Flicks

Default: Pan
Up/ Down/
Back, and
Forward

Make quick drag
gestures in the
described direction

*Reference from Microsoft®

USER MANUAL CHAPTER 3 OPERATING THE DEVICE

IP65 Flat Stainless Panel PC

19

3.3 How to Enable Watchdog

To enable Watchdog, you need to download Winmate Watchdog utility. Find more

information on Watchdog in “Watchdog Guide” that you can download from Winmate

Download Center or File Share.

To enable watchdog in Watchdog AP follow the instructions below:

• On the right bottom side of the desktop screen, click triangle button to show

hidden icons.

• Click icon to open Watchdog utility.

• In Watchdog utility window set countdown time and periodically feed time, or

disable watchdog.

Example:

Every 10 min watchdog will monitor
the system, in case any error occurs
the system will restart automatically
when the countdown time reaches 0.

Every 9 min watchdog timer will be
reset to 10 min.

User Manual Chapter 3 Operating the Device

20

IP65 FLAT STAINLESS PANEL PC

Settings

Description

Watchdog Countdown Time

The system automaticity restarts when this
countdown time reaches zero.

Default: 10 min

Periodically Feed Time

To set a cycle time to automatically reset
watchdog timer.

Default: 9 min

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 Flat Stainless Panel PC

21

AMI BIOS SETUP

BIOS Setup Utility is a program for
configuration basic Input / Output system
settings of the computer for optimum
use. This chapter provides information on
how to use BIOS setup, its functions and
menu.

USER MANUAL CHAPTER 4 AMI BIOS SETUP

22

IP65 FLAT STAINLESS PANEL PC

CHAPTER 4: AMI BIOS SETUP

BIOS Setup Utility is a program for configuration basic Input / Output system settings of
the computer for optimum use. This chapter provides information on how to use BIOS
setup, its functions and menu.

4.1 When and How to Use BIOS Setup

To enter the BIOS setup, you need to connect an external USB keyboard, press Del key
when the prompt appears on the screen during start up. The prompt screen shows only
few seconds so need press Del key quickly.

IMPORTANT:

Updated BIOS version may be published after the manual released.
Check the latest version of BIOS on the website.

You may need to run BIOS setup utility for reasons listed below:

A. Error message on screen indicates to check BIOS setup
B. Restoring the factory default settings
C. Modifying the specific hardware specifications
D. Necessity to optimize specifications

BIOS Navigation Keys

The following keys are enabled during POST:

Key

Function

Del

Enters the BIOS setup menu.

F7

Display the boot menu. Lists all bootable devices that are connected to
the system. With cursor ↑and cursor ↓and by pressing <ENTER>, select
the device used for the boot.

Pause

Pressing the [Pause] key stops the POST. Press any other key to resume
the POST.

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

23

The following Keys can be used after entering the BIOS Setup.

Key

Function

F1

General Help

F2

Previous Values

F3

Optimized Defaults

F4

Save & Exit

Esc

Exit

+/-

Change Opt.

Enter

Select or execute command

Cursor ↑

Moves to the previous item

Cursor ↓

Goes to the next item

Cursor ←

Moves to the previous item

Cursor →

Goes to the next item

NOTE:

You can press the F1, F2, F3, F4, –/+, and Esc keys by connecting a USB
keyboard to your computer.

For items marked ► press <Enter> for more options.

USER MANUAL CHAPTER 4 AMI BIOS SETUP

24

IP65 FLAT STAINLESS PANEL PC

4.2 BIOS Functions

This computer has AMI BIOS built-in and a CMOS SETUP utility that allow users to
configure required settings or to activate certain system features. The follwoing sections
describe the configuration options found in the menu items.

4.2.1 Main Menu

When you enter BIOS setup, the first menu that appears on the screen is the main menu.
It contains the system information including BIOS version, processor RC version, system
language, time, and date.

Immediately after the [DEL] key is pressed during startup, the main BIOS setup menu
appears:

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

25

BIOS Setting

Description

Setting Option

Effect

System
Language

Displays the system
language. [English] is
set up by default.

Adjustment of the
language

Set the language in
other language. The
language in this
device is English.

System
Date/Time

This is current date
setting. The time is
maintained by the
battery when the
device is turned off.

Date and time
changes.

Set the date in the
format
[mm/dd/yyyy];
The time in the
format:
[hh/mm/ss]

Access Level

The current user
access settings

Changes to the level
of access

Administrator is set
up by the default

USER MANUAL CHAPTER 4 AMI BIOS SETUP

26

IP65 FLAT STAINLESS PANEL PC

4.2.2 Advanced Menu

The advanced menu also uses to set configuration of the CPU and other system devices.
There are sub menus on the left frame of the screen.

CAUTION

Handle advanced BIOS settings page with caution. Any changes can
affect the operation of your computer.

Advanced Configuration and Power Interface (ACPI) settings allow to control how the
power switch operates. The power supply can be adjusted for power requirements. You
can use the screen to select options of ACPI configuration. A description of the selected
items will appear on the right side of the screen.

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

27

BIOS Setting

Description

Setting Option

Effect

Launch PXE
OpROM

Control Launch PXE
OpROM
parameters.

To limit the PXE
support to
particular devices,
use
the function Use
device for PXE.

Enabled

Load PXE Option
ROMs.

*Disabled

Ignore all PXE Option
ROMs.

Launch Storage
OpROM

Control Launch
Storage OpROM
parameters.

To limit the Storage
support to
particular
devices, use the
function Use device
for Storage.

Enabled

Load Storage Option
ROMs

*Disabled

Ignore all Storage
Option ROMs

PCI Subsystem
Settings

Configures PCI
Subsystem settings

Enter

Opens submenu

ACPI Settings

Configures ACPI
settings

Enter

Opens submenu

S5 RTC Wake
Settings

Configures RTC
Wake parameters

Enter

Opens submenu

CPU
Configuration

Configures CPU
settings

Enter

Opens submenu

Thermal
Configuration

Configures Thermal
Parameters

Enter

Opens submenu

IDE Configuration

Configures IDE
Parameters

Enter

Opens submenu

Intel Fast Flash
Standy

Configures Intel
Fast Flash Standy
Parameters

Enter

Opens submenu
USB Configuration

Configures USB
Settings

Enter

Opens submenu

F81865 Super IO
Configuration

Configures IO
settings

Enter

Opens submenu

F81865 H/W
Monitor

Configures
Hardware Monitor
settings

Enter

Opens submenu
PPM
Configuration

Configures PPM
settings

Enter

Opens submenu

*Default

USER MANUAL CHAPTER 4 AMI BIOS SETUP

28

IP65 FLAT STAINLESS PANEL PC

4.2.2.1 PCI Subsystem Settings

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

29

*Default

BIOS Setting

Description

Setting Option

Effect

PCI ROM Priority

Selects the PCI
Option ROM to
launch in case
Multiple Option
ROMs

Legacy ROM

Launches Legacy
ROM

EFI Compatible
ROM

Launches EFI
Compatible ROM

PCI Latency Timer

Use this function to
select the number
of PCI bus clocks to
be used for the PCI
latency timer.

*32/64/96/128/16
0/
192/224/248

Program the PCI
latency timer to X
PCI bus clocks.

VGA Palette
Snoop

Controls the ability
of a primary PCI
VGA controller to
share a common
palette (when a
snoop writes
cycles) with an ISA
video card.

Enabled
*Disabled

Enables or Disables
this function

PERR# Generation

Configure PERR#
Generation
Settings

Enabled
*Disabled

Enables or Disables
this function

SERR# Generation

Configure SERR#
Generation
Settings

Enabled
*Disabled

Enables or Disables
this function

USER MANUAL CHAPTER 4 AMI BIOS SETUP

30

IP65 FLAT STAINLESS PANEL PC

4.2.2.2 ACPI Settings

*Default

BIOS Setting

Description

Setting Option

Effect

Enable ACPI Auto
Configuration

BIOS ACPI Auto
Configuration

Enable/ *Disable

Enables or Disables
this function

Enable Hibernation

Control
hibernation.

This option may
be not effective
with some OS.

Enable/ Disable

Enables or Disables
this function
ACPI Sleep State

Control ACPI
Sleep State
parameters

Suspend Disable

System ability to
Hibernate (OS/S3
Sleep State)

S1

CPU Stop Clock

*S3

Suspend to RAM

Lock Legacy
Resources

Control Lock
Legacy Resources
parameters

Enable/ *Disable

Enables or Disable
Lock of Legacy
Resource.

S3 Video Repost

Control S3 Video
Repost
parameters

Enable/ *Disable

Enables or Disable S3
Video Repost

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

31

4.2.2.3 S5 RTC Wake Settings

You can use the screen to select options for Super IO Configuration, and change the
value of the option selected. A description of the selected item appears on the right side
of the screen.

BIOS Setting

Description

Setting Option

Effect

Wake system with
Fixed Time

Control System
wake on alarm
event settings

Enable/ *Disable

System wake on
alarm event. When
enabled, System
will wake on the
HR:MIN:SEC
specified

Wake system with
Dynamic Time

Set the system to
wake on the
current time +
increase minute (s)

Enabled/

Set the system to
wake on the
current time +
increase minute (s).

USER MANUAL CHAPTER 4 AMI BIOS SETUP

32

IP65 FLAT STAINLESS PANEL PC

4.2.2.4 CPU Configuration

BIOS Setting

Description

Setting Option

Effect

Hyper-Threading

Enables for
Windows XP and
Linux (optimized
for Hyper­Threading
Technology) and
Disabled for other
OS (not optimized
for Hyper­Threading
Technology)

Enable/
Disable

Enables or disables
Hyper-Threading
Technology

Execute Disable Bit

Configure Execute
Disable Bit Settings

Enable/
Disable

Enables or disables
Disable Bit
Execution

Limit CPUID
Maximum

Configure Limit
CPUID Maximum
Settings

Enable/
Disable

Enables or disables
Limit CPUID
Maximum

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

33

4.2.2.5 SATA Configuration

BIOS Setting

Description

Setting
Option

Effect

SATA Controller
(s)

SATA Ports (0-3) Device
Names if Present and
Enabled

Enable/
Disable

Enables or
Disables SATA
Ports
(0-3)

Configure SATA
as

Allows users to select mode
of SATA controller(s).

ACHI

Work in AHCI
mode of SATA
controller(s)

Port0 Speed Limit

Allow users to set Port0
Speed Limit

No Limit

No speed limit

Port1 Speed Limit

Allow users to set Port1
Speed Limit

No Limit

No speed limit

SATA Port 0

Allows users to enable or
disable the SATA Port 0.

Enabled/
Disabled

Enable or disable
this function

SATA Port 0 Hot
Plug

Allows users to enable or
disable the Port 0 Hot Plug.

Enabled/
Disabled

Enable or disable
this function

SATA Port 1

Allows users to enable or
disable the SATA Port 1.

Enabled/
Disabled

Enable or disable
this function

SATA Port 1 Hot
Plug

Allows users to enable or
disable Port 0 Hot Plug

Enabled/
Disabled

Enable or disable
this function

USER MANUAL CHAPTER 4 AMI BIOS SETUP

34

IP65 FLAT STAINLESS PANEL PC

4.2.2.6 iFFS Support

BIOS Setting

Description

Setting Option

Effect

iFFS Support

Control iFFS
Support
parameters

Enable/
Disable

Enables or
Disables this
function

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

35

4.2.2.7 USB Configuration

USER MANUAL CHAPTER 4 AMI BIOS SETUP

36

IP65 FLAT STAINLESS PANEL PC

BIOS Setting

Description

Setting Option

Effect

Legacy USB Support

User can enable or
disable USB port.
Disable

Will keep USB
devices available
only for EFI
applications.

Enable

Enable all the USB
devices

EMCI Hand‐off

This is a
workaround for
OSs without ECHI
hand‐ off support.

Disable

Disables this
function

Enable

Enables this
function

USB mass storage
driver support

User can Enable or
disable USB mass
storage driver
support.

Disable

Disables this
function

Enable

Enables this
function

USB Transfer time‐

out

The time‐out value

for control, bulk,
and interrupt
transfers.

1 Sec
5 Sec
10 Sec
20 Sec

Depends on the

time‐out value

Device Reset time‐

out

USB mass storage
device start unit

command time‐

out.

10 Sec
20 Sec
30 Sec
40 Sec

Depends on the

time‐out value

Device power‐up

delay

Maximum time the
device will take
before it properly
reports itself to the
host controller.

Auto

Uses default value:
for a root port it is
100 ms, for a Hub
port the delay is
taken from Hub
descriptor

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

37

4.2.2.8 F81865 Super IO Configuration

BIOS Setting

Description

Setting Option

Effect

Serial Port
1,2,3 ,4,5
Configuratio
n

Set Parameters of Serial Ports.
User can Enable/Disable the
serial port and select optimal
settings for the super IO Device.

Enabled/
Disabled

Enable or
disable Serial
Port (COM)

IO GPI0
Configuratio
n

You can use the screen to select
options for IO GPI0
Configuration.

A description of
the selected
item appears on
the right side of
the screen. For
items marked
with ►, please
press <Enter>
for more
options.

Change the
value of the
option
selected.

Watch Dog
Time Select

This watchdog timer can be used
to monitor system software
operation
and take corrective action if the
software fails to function after
the programmed period.

1~10 min/
Disabled

Set the time
1~10 min or
disable this
function

USER MANUAL CHAPTER 4 AMI BIOS SETUP

38

IP65 FLAT STAINLESS PANEL PC

4.2.2.9 PC Health Status

You can see System temperature, fan speed and other PC Health Status parameters.

BIOS Setting

Description

Setting Option

Effect

Fan 1 Smart Fan
Control

Set parameters of
Cooling smart fan
mode.

Enabled/ Disabled

Enable or disable
Fan 1 Smart Fan
Control

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

39

4.2.2.10 PPM Configuration

BIOS Setting

Description

Setting Option

Effect

EIST

Configure Intel
Speed Step (EIST)
parameters

Enabled/ Disabled

Enable or disable
Intel Speed Step
(EIST)

USER MANUAL CHAPTER 4 AMI BIOS SETUP

40

IP65 FLAT STAINLESS PANEL PC

4.3 Chipset

BIOS Setting

Description

Setting Option

Effect

Memory Frequency
Timing

Configures Memory
Frequency and
Timing Settings

Enter

Opens submenu
Intel IGD

Configuratgion

Configures Intel
IGO Settings

Enter

Opens submenu

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

41

4.3.1 Memory Frequency Timing

BIOS Setting

Description

Setting Option

Effect

MRC Fast Boot

Configures MRC
Fast Boot Settings

Enable/
Disable

Enable or Disable
MRC fast boot

USER MANUAL CHAPTER 4 AMI BIOS SETUP

42

IP65 FLAT STAINLESS PANEL PC

4.3.2 Intel IGD Configuratgion

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

43

BIOS Setting

Description

Setting Option

Effect

Auto Disable IGD

Auto disable IGD
upon external GFX
detected

Enable/
Disable

Enable or disable
this function

IGFX – Boot Type

Set IGFX – Boot
Type parameters

VBIOS Default

Select IGFX – Boot
Type

LCD Panel Type

Set LCD Panel Type
parameters

Panel resolution

Select LCD Panel
Type

Active LFP

Set Active LFP
parameters

Int-LVDS

Select Active LFP
parameters

Panel Scaling

Configure Panel
Scaling Settings

Auto

Configure Panel
Scaling Settings

Backlight Control

Set Backlight
Control
parameters

PWM Normal

Make desirable
settings

IGD Clock Source

Set IGD Clock
Source parameters

External Clock

Make desirable
settings

Backlight Control
Support

Set Backlight
Control Support
parameters

VBIOS-Default

Make desirable
settings

Fixed Graphics
Memory Size

Set Fixed Graphics
Memory Size
parameters

128Mb

Make desirable
settings

ALS Support

Configure ALS
Support Settings

Enable/
Disable

Enable or disable
this function

BIA

Configure BIA
Settings

Auto

Make desirable
settings

USER MANUAL CHAPTER 4 AMI BIOS SETUP

44

IP65 FLAT STAINLESS PANEL PC

4.4 Boot

BIOS Setting

Description

Setting Option

Effect

Setup Prompt
Timeout

Number of seconds
to wait for setup
activation key

1~X

Set the number of
seconds

Bootup Numlock
State

Select the keyboard
NumLock state

On/
Off

Set the keyboard
NumLock state
parameters

Quiet Boot

Configure Quiet
Boot Settings

Enabled/
Disabled

Enables or disables
Quiet Boot option

Fast Boot

Enables or disables
boot with
initialization of a
minimal set of
devices required to
launch active boot
option. Has no
effect for BBS boot
options

Enabled/
Disabled

Enables or disables
Fast Boot option

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

45

a. VGA

Support

Configures VGA
Support settings

Auto

Only install Legacy
OpRom with Legacy
OS and logo would
NOT be shown
during post. Efi
driver will still be
installed with EFi
OS.

EFI Driver

b. USB

Support

Configures USB
Support settings

Disabled

All USB devices will
NOT be available
until after OS boot

Full Initial

All USB devices will
be available in OS
and POST

Partial Initial

Specific USB
port/device will not
be available before
OS boot

c. PS2 Device

Support

Configures PS2
Device Support
settings

Enable/
Disable

If Disabled, PS2
devices will be
skipped

d. Network

Stack Driver
Support

Configures
Network Stack
Driver Support
settings

Enable/
Disable

If Disabled,
NetWork Stack
Driver will be
skipped

Gate A20 Active

Configures Gate
A20 Active settings

Upon Request

GA20 can be
disabled using BIOS
services

Always Active

Do not allow
disabling GA20; this
option is useful
when any RT code
is executed above
1MB

Option ROM
Messages

Set display mode
for Option ROM

Force BIOS/
Keep Current

Set display mode
for Option ROM

Interrupt 19
Capture

Configures
Interrupt 19
Capture settings

Disable

Disable this
function

Enable

Allows Option
ROMs to trap Int 19

Boot Option 1~3

Set the system
Boot order

UEFI: Built-in EFI
Shell

Set the parameter
for each Boot
Option 1~3

SATA SM: ADATA
XM15 32Gb

Set the parameter
for each Boot
Option 1~3

USER MANUAL CHAPTER 4 AMI BIOS SETUP

46

IP65 FLAT STAINLESS PANEL PC

UEFI: ADATA USB
Flash Drive 1.00

Set the parameter
for each Boot
Option 1~3

Disabled

Disable this
function

Hard Drive BBS
Priorities

Hard Drive BBS
Parameters

Enter

Opens sub-menu

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

47

4.5 Security

This section allows you to configure and improve your system and allows you to set up
some system features according to your preference.

BIOS Setting

Description

Setting
Option

Effect

Adminisrator
Password

Displays
whether or not
an administrator
password has
been set.

Enter
password.
Length 3~20

If only Administrator’s password is
set, then this only limits access to
Setup and is only asked for when
entering Setup/

User
Password

Display whether
or not a user
password has
been set.

Enter
password.
Length 3~20

If only User’s password is set.
Then this is a power on password
and must be entered to boot or
enter setup. In Setup the User will
have Administrator rights

HDD 0:
ADATA XM15
3

Set HDD Security
Configuration

HDD Password

Allows Access to Set, Modify and
Clear Hard Disk User and Master
Passwords. User password need
to be installed for Enabling
Security. Master Password can be
Modified only when successfully
unlocked with Master Password in
POST.

USER MANUAL CHAPTER 4 AMI BIOS SETUP

48

IP65 FLAT STAINLESS PANEL PC

4.6 Save & Exit

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

49

BIOS Setting

Description

Setting
Option

Effect

Save Changes and
Exit

This saves the
changes to the
CMOS and exits the
BIOS Setup
program.

<YES>

Save changes

Discard Changes
and Exit

This exits the BIOS
Setup without
saving the changes
made in BIOS Setup
to the CMOS.

<YES>

Saves the changes

<NO>

Return to the BIOS
Setup Main Menu

Save Changes and
Reset

Reset the system
after saving the
changes.

<YES>

Saves the changes

<NO>

Return to the BIOS
Setup Main Menu

Discard Changes
and Reset

Reset system setup
without saving any
changes

<YES>

Saves the changes

<NO>

Return to the BIOS
Setup Main Menu

Save Changes

Save changes done
so far to any of the
setup options.

<YES>

Saves the changes

<NO>

Return to the BIOS
Setup Main Menu

Discard Changes

Discard changes
done so far to any
of the setup
options.

<YES>

Saves the changes

<NO>

Return to the BIOS
Setup Main Menu

Restore Defaults

Restore/load
default values for all
the setup options.

<YES>

Saves the changes

<NO>

Return to the BIOS
Setup Main Menu

Save as User
Defaults

Save the changes
done so far as User
defaults.

<YES>

Saves the changes

<NO>

Return to the BIOS
Setup Main Menu

Restore User
Defaults

Restore the User
Defaults to all the
setup options.

<YES>

Saves the changes

<NO>

Return to the BIOS
Setup Main Menu

USER MANUAL CHAPTER 6 DRIVER INSTALLATION

50

IP65 FLAT STAINLESS PANEL PC

DRIVER INSTALLATION

This chapter describes how to install all
necessary drivers.

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

51

CHAPTER 5: DRIVER INSTALLATION

This chapter describes how to install all necessary drivers.

5.1 Chipset Driver Installation

5.1.1 Standard CMOS Features

1. Insert the CD that comes with the motherboard. Open the file document “Chipset

Driver”.

2. Click on “infinst_auto.exe“ to install driver.

3. Click on “Yes “ to agree with the terms of License.

USER MANUAL CHAPTER 6 DRIVER INSTALLATION

52

IP65 FLAT STAINLESS PANEL PC

4. Click on “Next“ to install driver.

5. Click on “Next“ to install driver.

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

53

6. Click on “Yes, I want to restart this computer now“, and the click “Finish” completing

chipset driver installation.

USER MANUAL CHAPTER 6 DRIVER INSTALLATION

54

IP65 FLAT STAINLESS PANEL PC

5.2 Graphic Driver Installation

5.2.1 Standard CMOS Feature

The computer is equipped with Intel NM10 Companion Device. The Intel Graphic Drivers should

be installed first, and it will enable “Video Controller (VGA compatible). Follow the instructions

below to complete the installation. You will quickly complete the installation.

1. Insert the CD that comes with the computer. Open the file document “Graphic Driver”.

2. Click on “setup” to execute the setup.

USER MANUAL CHAPTER 4 AMI BIOS SETUP

IP65 FLAT STAINLESS PANEL PC

55

3. Click on “Next “to install Driver.

4. Click on “Yes “ to agree with the terms of license.

USER MANUAL CHAPTER 5 DRIVER INSTALLATION

56

IP65 FLAT STAINLESS PANEL PC

5. Click on “Next “ to install Driver.

6. Click on “Next “to install Driver.

USER MANUAL CHAPTER 5 DRIVER INSTALLATION

IP65 FLAT STAINLESS PANEL PC

57

7. Click on “Yes, I want to restart this computer now“ to go on.

5.2.2 Panel Resolution Setting

1. Right-click the desktop, and then click Properties.

2. In the Display Properties dialog box, click the Settings tab.

1. Click on “Monitor”.

USER MANUAL CHAPTER 5 DRIVER INSTALLATION

58

IP65 FLAT STAINLESS PANEL PC

2. Click on “Hide modes that this monitor cannot display” to remove this option.

USER MANUAL CHAPTER 5 DRIVER INSTALLATION

IP65 FLAT STAINLESS PANEL PC

59

1. Click on “Setting”, then could choose 32bit color quality.

USER MANUAL CHAPTER 5 DRIVER INSTALLATION

60

IP65 FLAT STAINLESS PANEL PC

5.3 Ethernet Driver Installation

You must make sure which operating system you are using before installing the Ethernet
drivers. Follow instruction below to complete the installation of the Broadcom
BCM57780 Gigabit Ethernet controller LAN drivers. You will quickly complete the
installation.

1. Right-click the desktop, and then click Properties.

2. In the Other device dialog box, click the Settings tab.

USER MANUAL CHAPTER 5 DRIVER INSTALLATION

IP65 FLAT STAINLESS PANEL PC

61

3. Click on “Update Driver” to execute the setup.

4. Click on “Browse my computer for driver software“ to install driver.

USER MANUAL CHAPTER 5 DRIVER INSTALLATION

62

IP65 FLAT STAINLESS PANEL PC

5. Choose the path to install driver.

6. Click “Close“ to finish driver installation.

USER MANUAL CHAPTER 5 DRIVER INSTALLATION

IP65 FLAT STAINLESS PANEL PC

63

5.4 Audio Driver Installation

The ALC888 series are high-performance 7.1+2 Channel High Definition Audio Codecs
providing ten DAC channels that simultaneously support 7.1 sound playback, plus 2
channels of independent stereo sound output (multiple streaming) through the front
panel stereo outputs. The series integrates two stereo ADCs that can support a stereo
microphone, and feature Acoustic Echo Cancellation (AEC), Beam Forming (BF), and
Noise Suppression (NS) technology.

You must confirm which operating system you are using before installing the Audio
drivers.

Follow the steps below to complete the installation of the Realtek ALC655 Audio drivers.

1. Insert the CD that comes with the motherboard. Open the file document

“alc655_driver” and click on “Vista_Win7_R260.exe” to execute the setup.

2. Click on “Yes“ to install driver.

3. Click on “Yes, I want to restart my computer now” to finish installation.

USER MANUAL CHAPTER 5 DRIVER INSTALLATION

64

IP65 FLAT STAINLESS PANEL PC

5.5 Fintek COM Port Driver Installation

1. If the system is WIN7 please first close UAC(Refer to “Disabling User Account

Control (UAC) in Windows 7”).

2. Extract the Patch_0408.zip to a folder.

3. Double-click batch file(patch.bat) will install driver.

4. Check driver install success.

Before the update or update fail.

After the update and update success.

USER MANUAL CHAPTER 5 DRIVER INSTALLATION

IP65 FLAT STAINLESS PANEL PC

65

5. You will need to restart your computer for driver install success. Type in this

command from the Run menu:

C:\Windows\System32\UserAccountControlSettings.exe or uac

To turn off UAC, move the slider to the Never notify position, and then click OK. If you're
prompted for an administrator password or confirmation, type the password or provide
confirmation.

To turn UAC back on, move the slider to choose when you want to be notified, and then
click OK. If you're prompted for an administrator password or confirmation, type the
password or provide confirmation.

You will need to restart your computer for UAC to be turned off.

USER MANUAL CHAPTER 6 MOUNTING

66

IP65 FLAT STAINLESS PANEL PC

MOUNTING

This chapter provides step-by-step
mounting guide for all available
mounting options.

USER MANUAL CHAPTER 6 MOUNTING

IP65 FLAT STAINLESS PANEL PC

67

CHAPTER 6: MOUNTING

This chapter provides mounting guide for all available mounting options. Pay attention to
cautions and warning to avoid any damages.

WARNING! / AVERTISSEMENT!
Follow mounting instructions and use recommended mounting hardware to
avoid the risk of injury.
Suivez les instructions de montage et d'utilisation recommandé le matériel
de montage pour éviter le risque de blessure.

6.1 Cable Mounting Considerations

For a nice look and safe installation, make sure cables are neatly hidden behind the HMI
device. Refer to Chapter 2, section 2.1 for the cable installation instruction.

WARNING! / AVERTISSEMENT!
Observe all local installation requirements for connection cable type and
protection level.

Suivre tous les règlements locaux d’installations, de câblage et niveaux de

protection.

WARNING! / AVERTISSEMENT!
Turn off the device and disconnect other peripherals before installation.
Éteindre l’appareil et débrancher tous les périphériques avant l’installation.

ALTERNATING CURRENT / MISE À LE TERRE!
To prevent electrical shock, the Safety Ground location on the rear must be
bonded to the local earth ground through a minimum 12 AWG wire as short
as possible
Pour éviter les chocs électriques, l’emplacement de la prise terre à l’arrière
doit être lié à terre locale, à travers un 12 AWG minimum et aussi court
que possible.

USER MANUAL CHAPTER 6 MOUNTING

68

IP65 FLAT STAINLESS PANEL PC

6.2 Safety Precautions

Observe the following common safety precautions before installing any electronic device:

• Use separate, non-intersecting paths to route power and networking wires. If power
wiring and device wiring paths must be crossed make sure the wires are perpendicular
at the intersection point.

• Keep the wires separated according to the interface. Wires that share similar electrical
characteristics must be bundled together.

• Do not bundle input wiring with output wiring. Keep them separate.
When necessary, it is strongly advised that you label wiring to all devices in the system.

USER MANUAL CHAPTER 6 MOUNTING

IP65 FLAT STAINLESS PANEL PC

69

6.3 Mounting Guide

This Panel PC comes with different mounting options suitable for most of the industrial and
commercial applications.

6.3.1 VESA Mounting

This Panel PC has VESA mount holes on the rear side. Follow instructions below to mount the
unit with VESA Mount bracket (not supplied by Winmate).

Size

VESA Plate Dimensions

Screw hole diameter

15”

100 x 100 mm

VESA M4x5 mm

Mounting Steps:

1. Screw VESA bracket to the fixture (ex. swing arm) with four VESA screws.

2. Place the device on VESA bracket.

USER MANUAL CHAPTER 6 MOUNTING

70

IP65 FLAT STAINLESS PANEL PC

6.3.2 Rear Mounting

Before you start installing the rear mount, be sure that you have the following components:

Panel PC

2 x Bracket

M4, 4mm Screw

To install the rear mount, perform the following:

 Prepare a customized fixture for Panel PC.

 Screw the brackets on both sides of your device.

 Secure the device from the back side first, so the outer frame can be fully covered to

ensure the safety of your device.

USER MANUAL CHAPTER 6 MOUNTING

IP65 FLAT STAINLESS PANEL PC

71

 Make sure your screws are tight and on the right position.

USER MANUAL CHAPTER 7 TECHNICAL SUPPORT

72

IP65 FLAT STAINLESS PANEL PC

TECHNICAL SUPPORT

This chapter includes directory to Winmate
technical support.

USER MANUAL CHAPTER 7 TECHNICAL SUPPORT

IP65 Flat Stainless Panel PC

73

CHAPTER 7: TECHNICAL SUPPORT

This chapter includes technical support documents and software developing kit (SDK). If
any problem occurs fill in problem report form enclosed and immediately contact us.

7.1 Software Developer Support

Winmate provides the following SDK and Utilities for the IP65 Flat Stainless Panel PC

Item

File Type

Description

1

SDK

Watchdog SDK

2

Utility

Watchdog Utility

To find the Drivers and SDK, please refer to the Driver CD that comes in the package or
contact us. Also, you can download drivers from Winmate Download Center or Winmate
File Share.

7.1.1 Winmate Download Center

Go to http://www.winmate.com.tw/ > Support > Download Center > Full IP65 Stainless
PPC > IP65 Flat PCAP Series – Bay Trail

Or follow the link:

http://www.winmate.com.tw/DownCenter/DownLoadCenter.asp?DownType=4302

7.1.2 Winmate File Share

Go to http://www.winmate.com.tw/ > Support > Partner Portal > Public Documents >
Panel PC > Stainless Series > IP65 Flat P-CAP Series > IB32

Or follow the link: https://winmate.box.com/v/Flat-Stainless-PCAP-PPC-IB32

USER MANUAL CHAPTER 7 TECHNICAL SUPPORT

74

IP65 Flat Stainless P-CAP Panel PC

7.2 Problem Report Form

IP65 Flat Stainless Panel PC

Customer name:

Company:

Tel.:

Fax:

E-mail:

Date:

Product Serial Number: ____________________________________________________

Problem Description: Please describe the problem as clearly as possible. Detailed
description of the occurred problem will allow us to find the best solution to solve the
problem as soon as possible.
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________

USER MANUAL APPENDIX A PRODUCT SPECIFICATIONS

IP65 Flat Stainless Panel PC

75

PRODUCT SPECIFICATION

This section includes product
specifications.

Appendix

USER MANUAL APPENDIX A PRODUCT SPECIFICATIONS

76

IP65 FLAT STAINLESS PANEL PC

APPENDIX A: PRODUCT SPECIFICATIONS

Hardware Specifications

Model Name

R15ID3S-65A1FTE

R15ID3S-65A1FTP

Display

Size

15”

15”

Resolution

1024 x 768

1024 x 768

Brightness

400  (typ.)

400  (typ.)

Contrast Ratio

700 : 1 (typ.)

700 : 1 (typ.)

Viewing Angle

-80~80(H); -60~80(V)

-80~80(H); -60~80(V)

Max Colors

16.2M

16.2M

Touch

ELO 5W Resistive Touch

Projected Capacitive Multi­Touch (P-CAP)

System

Processor

Intel® Atom ™ N2600 1.6 GHz

BIOS

AMI 16Mbit Flash

System
Chipset

Intel® NM10

System
Memory

1 x DDR3 SO-DIMM 800/1066 MHz (default 2 GB, max. 128 GB)

Storage

mSATA SSD (default 32GB, max. 128 GB)

Audio

ALC886 HD Audio Codec

SATA

1 x SATA II

Expansion Slot

1 x Mini PCIe (for SATA SSD)
1 x Mini PCIe (for wireless module)

Power Input

DC-IN (Lockable, Power Jack)

USER MANUAL APPENDIX B ORDERING INFORMATION

IP65 FLAT STAINLESS PANEL PC

77

ORDERING INFORMATION

This section includes product
specifications.

Appendix

USER MANUAL APPENDIX B ORDERING INFORMATION

78

IP65 FLAT STAINLESS PANEL PC

APPENDIX B: ORDERING INFORMATION

IP65 Flat Stainless Panel PC available for ordering in the following configurations.

SBC

Panel PC

RAM

SODIMM DDR3L
1 GB/ 2 GB/ 4 GB

OS

Windows Embedded 7 Standard
Windows XP Embedded

Storage

2.5” HDD/ SSD

Touch

ELO 5 Wires Resistive for R15ID3S­65A1FTE
Projected Capacitive Multi-Touch
(P-CAP) for R15ID3S-65A1FTP

Winmate Inc.

9F, No.111-6, Shing-De Rd., San-Chung District,
New Taipei City 24158, Taiwan, R.O.C

Tel: [phone]
Fax: [phone]
Email: [e-mail]
Official website: www.winmate.com