Winmate FA30 User Manual

Page 1
FA30 Motherboard
SBC with Freescale iMX6Q Processor
Page 2
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
I
FCC Statement
This device complies with part 15 FCC rules. Operation is subject to the following two conditions
This device may not cause harmful interference. This device must accept any interference received including
interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class "a" digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at him own expense.
Page 3
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
II
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. We assume no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or masks work rights to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Winmate Communication Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
Warranty
We warrant that each of its products will be free from material and workmanship defects for a period of one year from the invoice date. If the customer discovers a defect, We will, at its option, repair or replace the defective product at no charge to the customer, provided it is returned during the warranty period of one year, with transportation charges prepaid. The returned product must be properly packaged in its original packaging to obtain warranty service.
If the serial number and the product shipping data differ by over 30 days, the in-warranty service will be made according to the shipping date. In the serial numbers the third and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g., with A for October, B for November and C for December).
For example, the serial number 1W11Axxxxxxxx means October of year 2011.
Page 4
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
III
Packing List
Before using this Motherboard, please make sure that all the items listed below are present in your package
FA30 Motherboard User Manual
If any of these items are missing or damaged, contact your distributor or sales representative immediately.
Customer Service
We provide service guide for any problem as follow steps The first, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance. You may have the following information ready before you call
Product serial number Peripheral attachments Software (OS, version, application software, etc.) Description of complete problem The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are always ready to give advice on application requirements or specific information on the installation and operation of any of our products. Please do not hesitate to call or e-mail us.
Page 5
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
IV
Safety Precautions
Warning!
Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronic personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis.
Page 6
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
V
Safety and Warranty
1. Please read these safety instructions carefully.
2. Please keep this user's manual for later reference.
3. Please disconnect this equipment from any AC outlet before cleaning. Do not use
liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the equipment
and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or electrical shock.
13. Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
14. If any of the following situations arises, get the equipment checked by service
personnel:
A. The power cord or plug is damaged. B. Liquid has penetrated into the equipment. C. The equipment has been exposed to moisture. D. The equipment does not work well, or you cannot get it to work according to
the user’s manual.
E. The equipment has been dropped and damaged. F. The equipment has obvious signs of breakage.
15. Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20° C (-4°F) or above 60° C (140° F). It may damage the equipment.
Page 7
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
VI
Revision History
Version
Date
Note
Author
1.0
2014.08.27
First Release
Woody Huang
Page 8
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
VII
Contents
Chapter 1 General Information ........................................................................... 2
1.1 Introduction..................................................................................................... 2
1.2 Feature ............................................................................................................ 2
1.3 Motherboard Specifications ............................................................................. 3
1.4 Function Block ................................................................................................. 4
1.5 Board dimensions ............................................................................................ 5
Chapter 2 Installations ....................................................................................... 8
2.1 I/O Equipment Installation ............................................................................... 8
2.1.1 12V DC-IN ......................................................................................................................... 8
2.1.2 Isolated expansion port .................................................................................................... 8
2.1.3 Ethernet interface ............................................................................................................. 8
2.1.4 USB ports .......................................................................................................................... 8
2.1.5 Isolated CAN BUS .............................................................................................................. 8
2.1.6 Micro USB ports ................................................................................................................ 8
2.1.7 Audio function .................................................................................................................. 8
2.1.8 LVDS connector ................................................................................................................. 8
2.1.9 LED backlight power supply .............................................................................................. 9
2.2 Switches and Connectors .................................................................................. 9
2.3 Switch Setting ................................................................................................ 10
2.3.1 Boot from SD Card Setting .............................................................................................. 10
2.3.2 Boot from eMMC Setting ................................................................................................ 10
2.3.3 Boot from mSATA SSD ..................................................................................................... 10
2.4 Connectors and Pin Assignment...................................................................... 11
2.4.1 CN8: 12V DC input .......................................................................................................... 12
2.4.2 CN19: I2C Touch Connector ............................................................................................ 12
2.4.3 CN17: LVDS Connector .................................................................................................... 12
2.4.4 CN18: LED Backlight Power ............................................................................................. 13
2.4.5 CN13: SPK_L .................................................................................................................... 13
2.4.6 CN14: SPK_R ................................................................................................................... 13
2.4.7 CN15: Headphone ........................................................................................................... 13
2.4.8 CN16: Mic ....................................................................................................................... 13
2.4.9 CN20: HDMI FPC Connector ........................................................................................... 13
2.4.10 CN6: SD Card Slot ....................................................................................................... 14
Page 9
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
VIII
2.4.11 CN11: Micro USB(OTG)............................................................................................... 14
2.4.12 USB Wafer (2*USB) .................................................................................................... 14
2.4.13 CN1: CANBUS Connector ........................................................................................... 14
2.4.14 CN3: Dual USB 2.0 A-type .......................................................................................... 15
2.4.15 CN2: RJ45 LAN Connector .......................................................................................... 15
2.4.16 CN7: RJ45 LAN Connector .......................................................................................... 15
2.4.17 CN12: Keypad Connector ........................................................................................... 15
2.4.18 CN5: Isolated Expansion Port ..................................................................................... 15
2.4.19 CN21: 24V DC in for Expansion Port ........................................................................... 16
2.4.20 CN4: mSATA SSD Connector ....................................................................................... 16
Page 10
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
IX
Page 11
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
1
General Information
This chapter includes the FA30 Motherboard background information. Sections include:
Introduction Feature Motherboard Specification Function Block Board Dimensions
CHAPTER
1
Page 12
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
2
Chapter 1 General Information
1.1 Introduction
FA30 SBC is an integrated package that provides customers a complete RISC platform for project evaluation, application development and solution feasibility testing that decreases lead-time and lowers initial cost and investment.
In peripheral connectivity, FA30 SBC features with two LAN port, two USB 2.0 A-type connectors, one isolated CANBUS connector (combined 2 CANBUS), one isolated expansion port (combined two 24V device port and 3 pin GPIO), one Micro USB OTG, one Micro USB debug port, and one SD card reader.
1.2 Feature
144mm x 115.28mm Supports Freescale Cortex
TM
– A9 iMX6 Quad 1GHz processor
Android 4.2.2 / Linux supported LVDS interface supporting up to 1920x1200 1 x SD/SDHC Card Slot 2 x 10/100/1000 LAN 2 x USB 2.0 A-type 1 x Micro USB OTG supported 1 x mini PCIe mSATA SSD supported 1 x I2C touch supported(by FPC connector) 1 x Isolated expansion port(2 x 24V Device Port which max 12W, 1 x
3pin Digital Input)
1 x Isolated CAN 2.0B(2 CAN ports in one connector)
Page 13
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
3
1.3 Motherboard Specifications
CPU Type
Freescale Cortex A9 iMX6Q 1GHz
CPU Speed
1 GHz
LCD interface
LVDS interface supporting up to 1920x1200
LAN
IEEE 802.3/802.3u 10/100 Base-T
Memory Type
LPDDR3 SDRAM 1GB
Storage
Support mini PCIe mSATA SSD storage device Optional eMMC Max with 32GB
Graphic
PowerVR SGX 3D Gfx
Audio
Internal Buzzer 85dBA/30cm, two stereo speaker(L/R) and one Mic by pin-header.
Watchdog Timer
Watchdog timer with 4 channel supply monitor
Edge Connectors
1 x Isolated expansion port(2 x device port with 24V DC, Max 12W and 3 x Digital Input) 2 x LAN 10/100/1000 2 x USB 2.0(USB A-type) 1 x Isolated CAN 2.0B(2 CAN ports in one connector) 2 x Micro USB AB-type(1 x OTG USB 2.0, 1 x Debug Port) 1 x SD Card Slot(Compatible with SDHC)
On Board Pin-Header Connectors
1 x 12V DC Power Input by pin-header 1 x I2C Touch by FPC connector 1 x LVDS by pin-header (up to 1920x1200) 1 x LED backlight power supply(PWM and without build in backlight driver board panel only) 2 x Speaker(L/R) by pin-header 1 x Mic by pin-header 1 x HDMI by FPC connector 2 x USB 2.0 in one connector by pin-header 1 x mSATA SSD Slot 1 x keypad by FPC connector
Dimensions
144 mm x 115.28 mm
Mechanical & environmental
Operating temperature: -10 deg. C to 60 deg. C Operating Humidity: 10 ~ 90% Relative humidity, non-condensing
Page 14
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
4
1.4 Function Block
GPIO X 3
82574IT
CN10
mUSB B
Debug
PCIe
USB OTG
LVDS0
SJTAG
uSDHC-3
UART-1
FT232RL
mSATA
GPIO X 3
PWM1
I2C3
PWM2
MMPF0100NPEP
AD7417
I2C2
24C02
LT3755
LM3710XQMM
WDO
GPIO
CN8
DC12V IN
4Pin
SC417
+3.3V
SC417
+4.2V
SC417
+5V
Isolation
Power
Board
IRT41
LPDDR3 SDAM
1GB
CPU
Freescale
iMA6 Q
CAN
Transceiver
SPI Flash
32Mb
RTC
USB HUB
Ethernet PHY
CN9
20Pin JTAG
PCIe Ethernet
TCMT1107
Touch Screen
10.4" LCD Panel
1024x768
XGA
mSATA
4GB SSD
CN12
Dimmer+/-
Power
(Or with E-buttons)
LED Backlight
Driver
Temperature
Sensor
EEPROM
Intertnal
Buzzer Driver
WatchDog
PMIC
USB to RS232
Transceiver
SD/MMC
Socket
EMC Filter /Transient Protection
CN11
mUSB B
CN7
RJ45-2
CN5
E-Buzzer
E-FAN
CN2
RJ45-1
CN1
2xCAN
CN3
USB A-1
USB A-2
Note:
Inside the dash line is isolated part.
Internal Buzzer
GPIO
CS0
MMDC
MT41K128M16JT
MCIMX6Q6AVT10AC
ISO1050
CAN
Transceiver
ISO1050
GCSPI1
M25P32-VMW6TG
GL852GT
ENET
FlexCAN2
FlexCAN1
I2C1
M41T82
USB HOST
AR8031
Phototransistor
TCMT1107
Phototransistor
E-Buttons
GPIO
PWM3
HDMI
Reserved
Reserved
eMMC
Audio Codec
Reserved
Page 15
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
5
1.5 Board dimensions
Page 16
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
6
Page 17
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
7
Installations
This chapter provides information on how to use the jumps and connectors on the FA30 Motherboard. The Sections include:
I / O Equipment Installation Switches and Connectors Switch Setting Connector and Pin Assignment
CHAPTER
2
Page 18
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
8
Chapter 2 Installations
2.1 I/O Equipment Installation
2.1.1 12V DC-IN
The Motherboard allows plugging 12V DC-IN with pin-header on board without additional power module converter.
2.1.2 Isolated expansion port
There are 8pin isolated expansion port on board which can support two 24V DC device and 3pin GPIO.
2.1.3 Ethernet interface
The Motherboard is equipped with two RJ-45 jack which is fully compliant with the 10/100/1000 Mbps Ethernet protocol compatible. It is supported by major network operating systems.
2.1.4 USB ports
FA30 have four USB port which two as A-type connector and others as pin-header. The USB ports support hot-plug connection.
2.1.5 Isolated CAN BUS
Two CANBUS combined in one connector and with isolated design.
2.1.6 Micro USB ports
Two Micro USB connectors which one for OTG USB 2.0 and other is debug port.
2.1.7 Audio function
The audio interface includes three pin-header connectors on board: two for Stereo Speaker out (L/R) and one Mic in.
2.1.8 LVDS connector
FA30 can support LVDS interface panel and resolution up to 1920*1200. For more information please contact local distributor or sales representative.
Page 19
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
9
2.1.9 LED backlight power supply
Please contact local distributor or sales representative for more detail about this.
2.2 Switches and Connectors
BT1-Button Cell Battery connector CN12- Keypad FPC connector SW1 SW2 SW3
mSATA
SSD Slot
12V DC
Power Input
I2C Touch Connector
LVDS
Connector
SPK
(L/R)
LED Power
Supply
24V DC
input for
expansion
port
SD Card Slot
Micro USB
OTG
Micro USB Debug Port
Isolated expansion port(2*24V DC device port and 3pin Digital Input)
2*LAN
2*USB A type
Isolated CAN BUS
2*USB
Wafer
Mic &
Headphone
HDMI FPC
Connector
Page 20
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
10
2.3 Switch Setting
There are 3 switches on FA30 and the switch setting combination will decide its boot up path such as from eMMC, mSATA SSD or SD card. If you have any doubts about the best hardware configuration for your application, contact your local distributor or sales representative before you make any changes.
2.3.1 Boot from SD Card Setting
2.3.2 Boot from eMMC Setting
2.3.3 Boot from mSATA SSD
SW1
OFF
ON
SW2
OFF
ON
SW3
OFF
ON
1
O 1
O 1
O 2
O 2
O 2
O
3 O 3 O 4 O 4 O SW1
OFF
ON
SW2
OFF
ON
SW3
OFF
ON
1
O 1
O 1
O 2
O 2
O 2
O 3 O 3 O 4 O 4 O
SW1
OFF
ON
SW2
OFF
ON
SW3
OFF
ON
1
O 1
O 1
O 2
O 2 O 2
O
3 O 3 O 4 O 4 O
Page 21
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
11
2.4 Connectors and Pin Assignment
The table below lists the function of each of the board’s connectors.
Label
Function
Note
CN8
12V DC input
4Pin header
CN19
I2C Touch Connector
10p P:0.5mm for FPC
CN17
LVDS LCD Output
2*20p P:1.25mm
CN18
LED Backlight Power
2 Pin header
CN13
SPK_L
2 Pin header
CN14
SPK_R
2 Pin header
CN15
Headphone
4Pin header
CN16
Mic
4Pin header
CN20
HDMI FPC Connector
18p P:0.5mm for FPC
CN6
SD Card Slot
CN11
Micro USB(OTG)
5 Pin Micro USB
USB1
USB Wafer(2*USB)
8Pin header
CN1
CANBUS Connector
Combine 2*CANBUS
CN3
Dual USB 2.0 A-type
CN2
RJ45 LAN Connector
CN7
RJ45 LAN Connector
CN12
Keypad Connector
4p P:1.0mm for FPC
CN5
Isolated Expansion Port
2*Device port and 3p GPIO
CN21
24V DC in for Expansion Port
4Pin header
CN4
mSATA SSD Connector
Mini PCIe Socket
Page 22
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
12
2.4.1 CN8: 12V DC input
2.4.2 CN19: I2C Touch Connector
2.4.3 CN17: LVDS Connector
Pin No.
SYMBOL
Pin No.
SYMBOL
1
LCDVDD
21
GND
2
LVDS0_TX0_N_F
22
LVDS1_TX0_N_F
3
LCDVDD
23
GND
4
LVDS0_TX0_P_F
24
LVDS1_TX0_P_F
5
LCDVDD
25
GND
6
LVDS0_TX1_N_F
26
LVDS1_TX1_N_F
7
GND
27
GND
8
LVDS0_TX1_P_F
28
LVDS1_TX1_P_F
9
GND
29
GND
10
LVDS0_TX2_N_F
30
LVDS1_TX2_N_F
11
GND
31
GND
12
LVDS0_TX2_P_F
32
LVDS1_TX2_P_F
13
GND
33
GND
14
LVDS0_CLK_N_F
34
LVDS1_CLK_N_F
15
GND
35
GND
16
LVDS0_CLK_P_F
36
LVDS1_CLK_P_F
17
GND
37
GND
18
LVDS0_TX3_N_F
38
LVDS1_TX3_N_F
19
GND
39
GND
20
LVDS0_TX3_P_F
40
LVDS1_TX3_P_F
PIN
NAME
1
DC_IN
2
DC_IN
3
DC_GND
4
DC_GND
PIN
NAME
PIN
NAME
1
NC
6
GND
2
NC
7
Touch_INTR
3
NC
8
Touch_I2C2_SDA
4
Touch_VCC
9
Touch_I2C2_SCL
5
Touch_VCC
10
Touch_RST
1
Page 23
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
13
2.4.4 CN18: LED Backlight Power
2.4.5 CN13: SPK_L
2.4.6 CN14: SPK_R
2.4.7 CN15: Headphone
2.4.8 CN16: Mic
2.4.9 CN20: HDMI FPC Connector
PIN
NAME
1
V+ 2 V-
Pin
NAME
1
LOUT+
2
LOUT-
Pin
NAME
1
ROUT+
2
ROUT-
PIN
NAME
PIN
NAME
1
Headphone_DET
4
GND_ANALOG
2
Headphone_L
5
GND_ANALOG
3
Headphone_R
6
GND_ANALOG
PIN
NAME
PIN
NAME
1
MICROPHONE_DET
4
GND_ANALOG
2
MIC_RAW
5
GND_ANALOG
3
MICBIAS2_RAW
6
GND_ANALOG
PIN
NAME
PIN
NAME
PIN
NAME
PIN
NAME
1
GND
6
DDC_DATA
11
TMDS0-
16
HPD1
2
TMDS2-
7
GND
12
TMDS0+
17
+5V
3
TMDS2+
8
TMDS1-
13
GND
18
+5V 4 GND
9
TMDS1+
14
CLK+
19
NC
5
DDC_CLK
10
GND
15
CLK-
20
NC
Page 24
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
14
2.4.10 CN6: SD Card Slot
2.4.11 CN11: Micro USB(OTG)
2.4.12 USB Wafer (2*USB)
2.4.13 CN1: CANBUS Connector
Pin
NAME
Pin
NAME
Pin
NAME
1
SD_DATA3
6
GND
11
GND
2
SD_CMD
7
SD_DATA0
12
SD_WP
3
GND
8
SD_DATA1
13
GND
4
VDDSHV4
9
SD_DATA2
14
NC
5
SD_CLK
10
SD_CD#
15
NC
PIN
NAME
PIN
NAME
1
OTG_VBUS
7
GND
2
USB_OTG_CON_DN
8
GND
3
USB_OTG_CON_DP
9
GND
4
USB0_OTG_ID
10
NC 5 GND
11
NC 6 GND
Pin
SYMBOL
Pin
SYMBOL
2
USBVCC
1
USBVCC
4
USB -
3
USB -
6
USB +
5
USB +
8
GND
7
GND
PIN
NAME
PIN
NAME
1
GND
4
GND
2
CANL_2_CONN_L
5
CANL_1_CONN_L
3
CANH_2_CONN_L
6
CANH_1_CONN_L
1 4 5 7 3 8 6
2
Page 25
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
15
2.4.14 CN3: Dual USB 2.0 A-type
2.4.15 CN2: RJ45 LAN Connector
2.4.16 CN7: RJ45 LAN Connector
2.4.17 CN12: Keypad Connector
2.4.18 CN5: Isolated Expansion Port
PIN
NAME
1
VCC_5V
2
Data-
3
Data+
4
GND
PIN
NAME
PIN
NAME
PIN
NAME
PIN
NAME
1
TX1+
5
POWER
9
TX4+
13
GLED
2
TX1-
6
DGND
10
TX4-
14
OLED
3
TX2+
7
TX3+
11
YLED
15
SHIELD
4
TX2-
8
TX3-
12
LED GND
16
SHIELD
PIN
NAME
PIN
NAME
PIN
NAME
PIN
NAME
1
TX1+
5
POWER
9
TX4+
13
GLED
2
TX1-
6
DGND
10
TX4-
14
OLED
3
TX2+
7
TX3+
11
YLED
15
SHIELD
4
TX2-
8
TX3-
12
LED GND
16
SHIELD
PIN
NAME
PIN
NAME
1
CPUPWRON_C
4
GND
2
DIMM-_C
5
GND
3
DIMM+_C
6
GND
Pin
NAME
Pin
NAME
1
VCC
5
Digital Input
2
GND
6
Digital Input
3
VCC
7
Digital Input
4
GND
8
GND
Page 26
FA30 Motherboard User Manual /
Engineering Spec.
FA30 Motherboard User Manual
16
2.4.19 CN21: 24V DC in for Expansion Port
2.4.20 CN4: mSATA SSD Connector
PIN
NAME
1
VCC
2
VCC
3
GND
4
GND
PIN
NAME
PIN
NAME
PIN
NAME
PIN
NAME
1
RESERVED
14
RESERVED
27
GND
40
GND
2
+3.3V
15
GND
28
+1.5V
41
+3.3V
3
RESERVED
16
RESERVED
29
GND
42
RESERVED
4
GND
17
RESERVED
30
SMB_CLK
43
GND
5
RESERVED
18
GND
31
TX-
44
RESERVED
6
+1.5V
19
RESERVED
32
SMB_DATA
45
VENDOR
7
RESERVED
20
RESERVED
33
TX+
46
RESERVED
8
RESERVED
21
GND
34
GND
47
VENDOR
9
GND
22
RESERVED
35
GND
48
+1.5V
10
RESERVED
23
RX+
36
RESERVED
49
DA/DSS
11
RESERVED
24
+3.3V
37
GND
50
GND
12
RESERVED
25
RX-
38
RESERVED
51
DET#
13
RESERVED
26
GND
39
+3.3V
52
+3.3V
Loading...