C350T Series PDA
User Manual (V1.0)
Notes:
All screens in this guide are simulated. Actual displays may be different.
Depend on the different software version on your C350T; you may get different
screens with same tasks.
Unless specified otherwise, all instructions to perform tasks in this guide
assume that you are starting from the home screen.
Before starting to use C350T
1) Insert Micro SD / SIM card(Optional)
The built-in storage space of your C350T series PDA is mainly used for operation
system. To enable some functions need bigger storage space, such as camera or
other APP, please insert a Micro SD card before using. If your C350T series PDA
supports 3G, remember insert a SIM card to activate your data connection.
2) Charge the Battery
The battery in your new C350T series device is not charged yet. Please charge with
the bundled USB cable before your first use.
Caution! Please don’t remove the battery pack or try to take this PDA apart
while the C350T is charging. These actions will result in some damages and may
invalidate your warranty.
3) Some tips for using and caring your PDA
Your C350T series PDA is designed to resist damages from certain rugged
conditions. However, to help care for your PDA, please avoid prolongedor extreme
exposure to those conditions.
To ensure the rugged design works and protects your PDA, please be sure
the USB connector coveris closed and the back cover is screwed properly.
Don’t leave your PDA near a heat source; this can damage the device.
Avoid dropping your PDA on a hard surface; this can potentially cause
damage to the device.
To clean your PDA, use a dry soft cloth. Don’t use alcohol or other cleaning
solutions.
Please don’t have your PDA contact with water when the cover is opened.
The water-proof design works only when the outer case is sealed properly.
Note: Certain apps and features may not be available in all countries.
I
C350T Outlook
Power
Button
Front View (without Barcode / RFID Reader)
Proximity Sensor
Function Button
Micro USB Port
(B type)
3.5” Touch Screen
Receiver
Power indicator
Flashing
Green
Amber Charging
Red Low power
Power
On/Off
Function Button
Press Sleep
Hold Power on / off
Version for Android OS:
Menu Home Back
Version for Windows OS:
Function 1 Start Function2
Microphone
II
Back View (without Barcode / RFID Reader)
Stylus
LED Flash Light
5M Pixel Camera
Speaker
Docking Connector
III
Front View (with Barcode / RFID Reader)
Power
Button
Proximity Sensor
Function Button
Micro USB Port
(B type)
3.5” Touch Screen
Receiver
Power indicator
Flashing
Green
Amber Charging
Red Low power
Power
On/Off
Function Button
Press Sleep
Hold Power on / off
Version for Android OS:
Menu Home Back
Version for Windows OS:
Function 1 Start Function2
Microphone
IV
Back View (with Barcode / RFID Reader)
Bar Code Reader
RFID Reader
Stylus
Sensor
C350T-BR1 or C350T-BR2
= 1D/2D Barcode Reader
C350T-B1R or C350T-B2R
= 1D/2D Barcode + HF RFID Reader
Docking Connector
V
Key Pad Table:
VI
CONTENTS INDEX
Set up & Go ...............................................................................1
Power On/Off ............................................................................5
Touch Screen and keys...............................................................6
Home Screen & Status............................................................. 12
Set up Language ...................................................................... 16
Set up Date & Time ................................................................. 16
Internet Connection ................................................................ 17
Bluetooth................................................................................. 19
App Menu................................................................................21
Software Update...................................................................... 23
Text entry.................................................................................24
Messaging................................................................................ 25
Camera.................................................................................... 26
Photo & Video.........................................................................29
SET UP &GO
1. Turn Off the PDA
Make sure the PDA is powered off and the USB cable is un-connected before you
remove the back cover.
Note: Please refer to page 5 for the details scenarios about how to turn off
your C350T PDA under Android OS.
2. Open the Back Cover
Make the PDA facing down, and then unscrew the 2 buckle. Gently pull out the
back cover.
1
3. Remove the Battery
Pull the plastic strap on the battery, and then remove it.
4. Insert SIM Card
Insert the SIM card (with its gold contacts facing down and cut-off corner facing
inside) all the way into the SIM card slot.
2
5. Insert Micro SD Card
1
2
Open the SD card holder by pushing the metal cover backward and lift it. Put the
Micro SD card into the socket, close the metal cover, and push forward till it
lucked.
6. Put back the Battery
Reinsert the battery by latching the bottom first and then put it down.
3
7. Put back the Back Cover
Put back the back cover and make sure all the 2 buckles fit those on the device to
fix the back cover.
8. Using the Stylus
CAUTION! Never use anything other than the C350T stylus on the screen.
Otherwise this could cause a permanent damage.
(1) Remove the stylus from its holder.
(2) Hold the stylus as you hold a pencil.
(3) To make a choice from a menu, lightly tap the tip of the stylus on that choice.
(4) To write data into a field on a form, use the stylus to print the letters or numbers.
Using very light pressure.
4
Loading...