Page 1
Quick Start Guide
IR-Control Unit ZF-310
Seite 1 von 2 Version 1.1 / 2018
Control Unit for temperature controller with IR-Interface
Description
The ZF-310 control unit is a compact, easy-to-use tool for temperature controller equipped with the
IR-Interface. It shows the current temperature, and can be used to adjust the set point, if the
controller supports adjustable set points.
Technical Data
Housing: plastic
Dimensions: 135 x 70 x 24 mm
Power supply: 2x AA battery (included)
Display: LCD graphic display
Controls: push buttons
Ambient temperature: 0°C..40°C
Safety class: 3
Degree of protection: IP40
Weight: 150 g
Page 2
Quick Start Guide
IR-Control Unit ZF-310
Seite 2 von 2 Version 1.1 / 2018
Operation:
The IR Control Unit can be switched on by any key. The IR Control Unit automatically tries to
establish a connection to a controller. If connection is made, this is shown by the link symbol. On
the controller, the multicolor LED starts blinking additionally white to the normal colors (green, or
red blinking or blue blinking). This indicates to which controller the IR Control Unit is connected.
Current temperature is shown under “Value” and set point can be adjusted (except on fixed
setpoint controllers) To adjust the setpoint just push or . If desired setpoint is reached, confirm
with . Only then the new setpoint will be transmitted. On multichannel controllers, multiple
setpoints will be asked one after another. At the end, all of them will be transmitted
simultaneously. The IR Control Unit switches automatically off after some time. To manually shut
off, just press together.
Disposal:
Electronic devices are recyclable waste and must not be disposed of in the household
waste! At the end of its service life, dispose of the product according to the relevant
statutory regulations.
Batteries must not be disposed of in the household waste. You are obliged by law to
return used batteries to ensure proper disposal. You may return used batteries on communal
collection points or in local commerce. We also are obliged to accept used batteries. We only need
to recollect only the types, we sell or have sold as new batteries. These types you may send
sufficient stamped back to us or return them on our logistic center.
Current temperature
set point
set
Change setpoint
connect
triggers new connection to a
controller
transmission symbol
inidcates if data is received
link symbol
indicates if connected to a
controller
Loading...