Winkhaus STV AV2 Operating Manual
Winkhaus STV
Operating Manual
Electronic Automatic Locking System
After installation please pass on these instructions to
the end customer according to the Information Disclosure Act stipulated in the Law on Product Liability!
Page 2
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
This security door locking system complies with the requirements and directives established and stipulated by the Council on the Harmonization of Legal Regulations of
Member States regarding Electromagnetic Compatibility (89/336/EEC).
The manufacturer shall hereby certify the conformity of this product and document such
by the CE marking (see Appendix).
Winkhaus STV GmbH & Co. KG
Berkeser Straße 6
D-98617 Meiningen
Germany
Tel.:+49(0)36 93/9 50-0
Fax:+49(0)36 93/9 50-1 34
www.winkhaus.de
The following information and graphic images provided correspond to the current status
of the development and manufacture of this product.
For the purpose of customer satisfaction and operational reliability of the electronic
automatic locking system, we reserve the right to make changes to this product.
All information and specifications given in this operating manual have been compiled
and reviewed with utmost care.
Due to the nature of technical advances made, amendments to legal regulations and
other compulsory changes we do not warrant for the correctness and completeness of
the contents’ statements.
We always do appreciate suggestions or comments.
The electronic automatic locking system can be easily installed, if these operating
instructions and the door specifications indicated have been followed.
© Winkhaus STV GmbH & Co. KG. All rights reserved. Last revised: Mai/2005
Page 3
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
Table of Contents
Table of Contents
1 Important information 4
1.1. General information 4
1.2. Intended use 4
1.3. Use contrary to the intended purpose 5
1.4. Explanation of symbols 6
1.5. Important safety information 6
1.6. Abbreviations/Explanations 7
2 Product description 8
3 Installation 14
3.1. Cutting diagrams 14
3.2. Cable transition KÜ-T STV (plug-in) 16
3.3. Installations 17
3.3.1. General connection diagram 17
3.4. Access control system, transponder set 18
3.5. Access control system, wireless remote control 20
3.5.1. Wireless remote control set 20
3.5.2. Wireless receiver (separate) 22
4 Operation/Programming 24
4.1. Electronic automatic locking system 24
4.1.1. Locking and unlocking 24
4.2. Electronic automatic door locking system with transponder 24
4.2.1. Operation 24
4.2.2. Programming 25
4.3. Electronic automatic locking system with wireless remote control 27
4.3.1. Operation 27
4.3.2. Programming 27
4.4. Wireless receiver for additional applications 31
5 Maintenance and care 33
6 Errors/Causes/Troubleshooting 34
7 Technical specifications 35
7.1. Antenna/Reader Unit 35
7.2. Wireless remote control 35
7.3. Cable transition 36
8 Accessories 37
Page 4
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
1 Important information
1.1. General information
Dear Customer,
We would like to thank you for your confidence you have put in us by purchasing our
high-quality product.
Please read this operating manual carefully to become acquainted with the installation and use of this security door locking system and to avoid malfunctions and safety
hazards.
Acceptance class A
1.2. Intended use
The electronic automatic locking system and the Winkhaus components recommended
are suited for the following areas of application:
• relative air humidity of max. 95%
• ambient air temperature of between -20°C and +60°C.
The complete door fittings are designed to be used in conjunction with the genuine
Winkhaus parts. Other parts which are not recommended by Winkhaus can adversely
affect the default properties of this locking system. We shall assume you use the lock as
intended.
The proper functions of the access control systems and of the accessory equipment
included in the scope of delivery of the Winkhaus company have been tested. If you use
components made by other companies and if you have any doubts about the suitability
of these components, you will have to contact the respective manufacturer about their
fitness for use.
To ensure the intended use:
• the information and instructions required for this purpose have to be passed on to
the respective persons;
• only trained professionals install the door fittings, locking units and accessory parts
according to the installation instructions. DIN standards, which may also apply are
to be followed, too.
1. Important information
Page 5
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
1. Important information
The stipulations of use as intended have been met, once the Winkhaus fittings are:
• installed according to their defined function and the installation specifications,
• not used in another way than described,
• maintained and cared for at regular intervals as instructed,
• not used any longer if signs of wear are detected,
• repaired by trained professionals in the event of malfunctions.
The supplier/manufacturer does not accept any liability for personal injury or material
damage caused by incorrect operation or improper use.
1.3. Use contrary to the intended purpose
The locking systems are not designed to absorb or compensate for changes in shape or
changes in the closing mechanism of the door caused by changes in temperature or in
the structure of the building.
Doors which are used in damp rooms and in environments with aggressive corrosionpromoting air compositions require special door furniture.
The locking systems are incorrectly used – that is use contrary to the one described
above – is evident in particular, if:
• the instructions on the intended use are not being followed;
• the problem-free operation is hindered due to the installation of external objects
and/or objects that are not purpose-conform in the opening zone, the locking system or within the center strike;
• the locking system or the center strike is manipulated in such a way that its design,
mode of operation or function is changed;
• the door is drilled through in the area of the locking houses or of the lock rod once
the lock has been installed;
• the additional opening and closing members or the moved-out dead bolt are impro-
perly used in order to keep the door open;
• force is used to drive the handle pin through the lock spindle;
• the locking elements are wrongly installed or are tampered with, e.g. by overpain-
ting movable parts like the lock dead bolt or latch;
• the locking system is subject to loads which exceed normal manual power and are
transmitted via the cylinder key;
• the handle is not loaded in the normal sense of rotation or a power above 150 N is
applied onto the handle into the direction of actuation;
Page 6
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
• the gap between the door frame and sash is increased or decreased, which would
for instance result from readjusting the hinge plates or from lowering the door;
• auxiliary lifting tools or objects are used to open or close the lock;
• the handle and the key are actuated simultaneously;
• the lock is locked/unlocked by using improper objects;
• input values different from the ones indicated in the Technical Specifications are
applied.
1.4. Explanation of symbols
Symbols and cues are used to identify important information in this operating manual.
Cues such as DANGER or CAUTION indicate the degree of hazard.
Symbols serve to visually emphasize the message.
It is imperative that you do follow the measures listed to avoid safety hazards!
DANGER!
Danger of life or danger of serious injuries.
CAUTION!
Danger of material damage.
NOTICE!
Useful information and tips.
ECO-WATCH!
Notices on complying with regulations on
environmental protection.
1.5. Important safety information
Safety information described in this section is to be diligently adhered to regarding the
installation and use of this security lock. You are to heed the safety information provided
without exceptions!
• Read the operating manual and keep it easily accessible for future reference. After
installing the door pass it on to the end customer.
1. Important information
Page 7
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
• The manufacturer shall not be held liable for damage caused by use contrary to the
intended purpose of the product.
• For security reasons, the lock has been designed to be used in conjunction with
genuine Winkhaus parts. Using other parts may adversely affect the given properties
of the security lock.
• It must be ensured that the door can be closed without any problems by the key.
• Installation/Repair of electrical equipment requires expertise, thus such work should
only be carried out by an electrician.
• Arbitrary modifications, changes or makeshift repairs are not permitted due to
concerns for safety. You must only use genuine Winkhaus parts for replacements.
• The manufacturer shall only be held liable for security related properties of the
locking system as stipulated within the bounds of statutory regulations, if the
manufacturer himself or another instructed, authorized agent has carried out the
maintenance and service work or made the changes.
• Winkhaus STV shall not be liable for any type of damage caused by inadequate
repair or changes made.
1.6. Abbreviations/Explanations
The following terms and abbreviations are used in this manual:
STV Security lock
AV2 Automatic locking system
EAV Electronic automatic locking
system
Handle Door handle
Grt. Set
SB FRA Center strike – latch/bolt/
leveling member
M2 with 2 massive hooks
RS DIN-right-handed
LS DIN-left-handed
mc Surface mat chrome-plated
est stainless steel
gr gray pulverized
Reader Reader unit/control unit of the
transponder set
AC Alternating current
DC Direct current
NO Make contact
NC Break contact
NO-NC Changer contact
ANT/GND Auxiliary antenna/Ground
UP-socket Flush-type box
LED Light emitting diode
1. Important information
Page 8
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
2 Product description
The electronic automatic locking system is a state-of-the-art locking unit for securing
and locking entry doors in a contact-free manner. Easy-to-use and convenient: All opening and closing members of the locking mechanism are power-driven.
In the
external zone
around the
entry door
Figure 2-1: Electronic automatic locking system with accessories
2. Product description
Page 9
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
No. Name
Included
in
standard
delivery
of the
security
lock
MUST!
be
used*
Available
as
accessory
or as an
option
Supplied by
customer/
not included
in standard
delivery
[1] Automatic locking AV2
(AV2-F/U ...)
X X
[2] Motor box X X
[3] Extension keep set/single strike X X
[4] Center strike FRA ... X X
[5]
[5.1]
[5.2]
Cable transition (KÜ-T STV)
Cable at the sash side 2 m
[2.187 yd] or 2.5 m [2.734
yd] long, plug for motor box
included
Cable at the frame side 4 m
[4.374 yd] long
X X
[6] Power supply 12 V DC/1 A X
[7] Access control system (shown:
antenna of the transponder set)
NOTICE! Only install the
antenna of the transponder
set in the external zone
around the entry door!
X
[8] “Open” key X
[9] Flush-type box X
[10] Handle X
* remaining components recommended for use, or should be used alternatively
2. Product description
Page 10
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
[1] Automatic locking system AV2
AV2-F 1660/35 92/8 M2 rs/ls mc 123 536 3/123 537 2
AV2-F 1660/35 92/8 M2 rs/ls est 124 212 2/124 213 1
AV2-F 1660/40 92/8 M2 rs/ls mc 123 540 7/123 541 6
AV2-F 1660/40 92/8 M2 rs/ls est 124 214 0/124 215 9
AV2-F 1660/40 92/10 M2 rs/ls mc 123 542 5/123 543 4
AV2-F 1660/45 92/8 M2 rs/ls mc 123 544 3/123 545 2
AV2-F 1660/45 92/8 M2 rs/ls gr 124 060 5/124 061 4
AV2-F 1660/45 92/10 M2 rs/ls mc 123 546 1/123 547 0
AV2-F 1660/50 92/8 M2 rs/ls mc 124 312 1/124 313 0
AV2-F 1660/50 92/8 M2 rs/ls est 124 216 8/124 217 7
AV2-F 1660/55 92/8 M2 rs/ls mc 123 548 9/123 549 8
AV2-F 1660/55 92/10 M2 rs/ls mc 123 854 7/123 855 6
AV2-F 1660/60 92/8 M2 rs/ls est 124 218 6/124 219 5
AV2-F 1660/65 92/8 M2 rs/ls mc 123 791 3/123 792 2
AV2-F 1660/65 92/8 M2 rs/ls est 124 220 2/124 221 1
AV2-F 1660/65 92/10 M2 rs/ls mc 123 550 4/123 551 3
AV2-F 2060/40 92/8 M2 rs/ls mc 123 552 2/123 553 1
AV2-F 2060/45 92/8 M2 rs/ls mc 123 554 0/123 555 9
AV2-F 2060/45 92/10 M2 rs/ls mc 123 556 8/123 557 7
AV2-F 2060/55 92/8 M2 rs/ls mc 123 558 6/123 559 5
AV2-F 2060/55 92/8 M2 rs/ls gr 124 074 9/124 075 8
AV2-F 2060/55 92/10 M2 rs/ls mc 123 891 2/123 892 1
AV2-F 2060/60 92/10 M2 rs/ls mc 123 560 2/123 561 1
AV2-F 2060/65 92/8 M2 rs/ls mc 123 562 0/123 563 9
AV2-F 2060/65 92/10 M2 rs/ls mc 123 564 8/123 565 7
AV2-F 2460/35 92/8 M2 rs/ls mc 123 566 6/123 567 5
AV2-F 2460/40 92/8 M2 rs/ls mc 123 568 4/123 569 3
AV2-F 2460/40 92/8 M2 rs/ls gr 123 895 8/123 896 7
AV2-F 2460/45 92/8 M2 rs/ls mc 123 694 1/123 695 0
AV2-F 2460/45 92/10 M2 rs/ls mc 123 777 1/123 778 0
AV2-U 2293/35 92/8 M2 rs/ls mc 123 755 7/123 756 6
AV2-U 2293/45 92/8 M2 rs/ls gr 123 713 8/123 714 7
AV2-U 2460/35 92/8 M2 rs/ls mc 123 570 0/123 571 9
AV2-U 2460/40 92/8 M2 rs/ls mc 123 596 0/123 597 9
AV2-U 2460/45 92/8 M2 rs/ls mc 123 574 6/123 575 5
AV2-U 2460/45 92/8 M2 rs/ls gr 123 779 9/123 780 6
AV2-U 2460/45 92/10 M2 rs/ls mc 123 572 8/123 573 7
AV2-U 2471/35 92/8 M2 rs/ls mc 123 538 1/123 539 0
AV2-U 2471/35 92/8 M2 rs/ls gr 123 863 6/123 864 5
AV2-U 2471/35 92/8 M2 rs/ls est 124 291 6/124 292 5
AV2-U 2471/45 92/8 M2 rs/ls mc 123 684 3/123 685 2
AV2-U 2471/45 92/8 M2 rs/ls gr 124 026 8/124 027 7
Automatic three-point locking system with protection unit
against faulty switching, DIN RS and LS directions
power-driven
unlocking
system (electric
latch release)
optionally
available
2. Product description
Page 11
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
Motor box for power-driven unlocking, control included,
without cable
• for transponder or wireless remote control
• optional: triggering unit for swing door opener via
floating contact
• available mounted or not mounted
Motor box EAV
1)
123 770 8
G2 motor box EAV mounted
2)
123 771 7
Motor box EAV (swing door)
3)
123 772 6
G2 motor box EAV (swing door) mounted
2) 3)
123 773 5
1)
for retrofitting simply screwing to the automatic
locking system
Caution: Pay attention to left-handed thread!
2)
if an automatic locking system + motor box EAV,
mounted, are simultaneously ordered supply of
the locking system with mounted motor box
3)
incl. signal (floating contact) for swing door opener.
NOTICE!
Please observe the following instructions when
using a swing door opener:
• Ensure that the motor can open the closing
member at any time.
• After unlocking, the control unit sends a
signal to the swing door opener which must
swivel out then immediately.
• If the swing door drive is triggered at another
point of time, malfunctions can be caused.
• If the main hook is unlocked manually, the
door may not be actuated electrically.
[2] Motor box
2. Product description
Page 12
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
[3] Extension keep set/single strikes
Select the corresponding standard frame parts in the
current program manual
(single strikes/alternatively extension keep set):
Program Manual Wood/Plastic/ALU 0804 012 405 6
Program Overview STV-System Wood Group 2
Program Overview STV-System Plastics Group 2
Program Overview STV-System Aluminum Group 2
(Example: profile Thyssen; frame L30; sash H40
extension keep set U26-192)
When ordering always indicate the DIN direction RS or LS.
[4] Center strike FRA
Center keep for latch and dead bolt of plastics, aluminum
and wooden entryway doors.
Select the respective keeps also according to the profile
systems in the current program manual (see above).
[5] Cable transition KÜ-T STV
Plug-in and concealed cable transition
• plugable by plug-in function with retaining screws
• sash element with spring jacket and cable of 2 m
[2.187 yd] or 2.5 m [2.734 yd] (plug for motor box
included)
• frame element with cable of 4 m [4.374 yd]
• concealed in the airgap
• used as the electric interface (max. 24 V DC/2 A)
between the sash of the door and the frame
• color: silver/gray
• it must not be cut-out for notch air from 11 mm
[0.433“], suited for entry doors of plastics or aluminum (depends on the system)
Cable transition KÜ-T STV 123 399 9
Cable transition KÜ-T-STV-FL 2.5 m 123 336 3
2. Product description
Loading...