Winix C535 User Manual

WINIX AIR CLEANE

R

User Manual

Model

Use & Care
Guide

C535

• Please read and follow all safety rules and instructions
in this manual before operating.

• The product warranty is printed on the back of this
guide, so please keep it in a safe place for future use.

• This product is manufactured for use only in USA/CA

3-STAGE AIR PURIFICATION

소피아 1

Odor
Sensor

Power cord with plug
(This product is suitable
for 120V only.)

Air Outlet Vent

PlasmaWave

Light Sensor

Control Panel / Display Panel

®

True HEPA Filter

Carbon Filter
Sheet

Pre-Filter

Front Panel

Unit Pre-Filter / (4) Carbon Filter

English

Sheets /

(1) True HEPA Filter

Remote
Control

PACKAGE

CONTENTS

User

Manual

C535

2

소피아 1

CONTROLS

PlasmaWave® Indicator

Indicates whether PlasmaWave®
is enabled or disabled.

Mode Button

Press to cycle through
and set the desired
mode of operation
(Auto, Sleep).

Air Quality
Indicator

Color-coded LED
indicates one of
three levels of air
quality.

Fan Speed Button

Enables Manual operation of the
unit. Press to cycle through and
set the desired fan speed (Low,
Medium, High, Turbo).

Timer Indicator

If timer has been set, the
LED light indicates the set
time of operation.

Fan Speed

Indicator
Indicates the
current fan speed.

PlasmaWave® Button

Enables or disables
PlasmaWave®.

Power Button

Turns the unit on
or off.

Reset Button

After replacing a lter,

press the RESET button
for at least 5 seconds.

Odor Sensor

When in Auto
Mode, detects the
amount of odor in
the environment
to adjust fan
speeds.

Light

Timer
Button

Press to cycle
through and set
desired length of
operation (1hr,
4hr, 8hr).

Sensor

Detects the
amount of
ambient
light in the
environment.

Check Filter Indicator

LED light indicates when it is

time to change the lter.

WHERE TO USE

Allow 12 ~ 18 in. of space between TVs, radios, and other electronics

electromagnetic interference from certain electronics may cause product malfunction.

Place indoors away
from direct sun light

direct exposure may cause
product malfunction or failure.

Only place on hard, at surfaces

imsy or slanted surfaces may result

in abnormal noise and vibrations.

Allow at least 4 in. from walls

for maximum air ow.

English

C535

3

SAFETY AND CAUTIONS

Follow these instructions to reduce the

WARNING

Before operating this equipment, carefully read and follow these
safety cautions

Ensure lters are inserted before running unit

running unit without lters can shorten the units life and cause electric shock or injury.

Be sure foreign objects are NOT inserted into the vents on the unit

objects can include pins, rods, and coins.

Do not touch any part of the interior of the unit with wet hands

the high voltage may cause electric shock.

Ensure unit intake and outlet vents do not become blocked

blockage may lead to increased internal temperatures causing product failure and
deformation.

Do not use the unit as a step stool or place heavy objects on it

personal injury may occur or product failure and deformation.

risk of serious injury or death and to
reduce risk of damagin the unit.

Do not pull on the power cord
when unplugging the unit

If the unit becomes submerged in water,
unplug it and contact customer service

Do not plug additional appliances
into the same outlet or power supply

Unplug unit when not in operation
for extended periods of time

Do not use around mist or fumes from
industrial oil or around large quantities
of metallic dust

Do not install in any sort of motor or
transport vehicle (trucks, boats, ships,
etc.)

Do not place near any ammable

materials (aerosols, fuel, gases etc.)

Do not place below any electrical outlet

*This unit is not intended to be used to preserve documents or in art conservation.

English

Do not tie or knot power cord
when unit is in operation

Cord can become damaged by
forcefully bending, pulling, twisting,
bundling, pinching or placing heavy
objects on it

Do not unplug or move
the unit while in operation

Do not touch the plug with wet hands

Do not place in excessively humid
areas where unit may become wet

Do not place in an area with
excessive amounts of noxious gases

Do not have unit facing
into wind or draft

Do not place around heating elements

C535

4

INSTALLING FILTERS

This product comes with all the required lters. The protective
plastic wrap must be removed from the lters before use.

• Operating the unit without removing the plastic wrap may result in
product failure.

• Unplug and make sure the unit is turned off before installing lters.

Remove the front panel by

grasping its upper edge and

gently pulling forward.

Latch

Remove the lters from the unit.

They are protected inside a
plastic wrap.

Remove lters from
protective plastic wrap.

Operating the unit without

removing lters from plastic

wrap may cause abnormal noise,

deformation, or re as a result of

overheating.

Install the lters until
they t securely in place.

Filters must be installed
in this order:

3. True HEPA Filter (back)

2. Carbon Filter Sheet (middle)

1. Pre-Filter (front)

To install the Pre-Filter, insert bottom tabs into the slots on
either side of the lower part of the unit, then rotate upward to

Note

English

insert the upper tabs into the slots at the top part of the unit
until sides audibly click into place.

True HEPA

3

Filter

Carbon

2

Filter

Pre-Filter

1

C535

5