WINIADAEWOO DPN4274NH User Manual

11

Note

The following items are optional accessories.
Refer purchasing optional accessories from

Daewoo Electronics Local retailer or the retailer
from where you purchased the unit.

Optional Accessories

Table Top Stand

Speakers

DPE-P20J

- Speaker Main Unit Dimension :
100(W) x 628(H) x 83(D) mm

39.37(W) x 24.72(H) x 3.27(D) inch

- Dimension Including Speaker Stand :
170(W) x 729(H) x 194(D) mm

6.69(W) x 28.7(H) x 7.64(D) inch

- Audio Amplifier : 10W + 10W

- Impedance : 8Ω

- Weight : 6.4kg(14.11 Lbs)

DPE-T20G

-

Dimension

: 667(W) x 212(H) x

320(D) mm

26.26(W) x 8.35(H) x

12.6(D) inch

- Weight : 7kg(15.43 Lbs)

Wall Mounting Unit

DSP/DP-HG10, DSP/DP-HG20,
DSP/DP-HG22

-

Variable Angles : 0o, 10o, 15o, 20

o

-

Dimension: 601(W) x 592(H) x 35(D) mm

23.66(W) x 23.31(H) x 1.9(D) inch

-

Weight

: 4.5kg(10 Lbs)

13

4 • Safety Precautions
8 • Checking Accessories
12 • Panel Controls
13 • Remote control
14 • To setup device change of remote control

PREPARATION

CONNECTION

15 • Antenna Connection
18 • To Watch TV
20 • Automatic Channel Memory
26 • Watching Digital Broadcasts
28 • Watching Cable Broadcasts
30 • Watching Satellite Broadcasts
32 • Watching a DVD Image
34 • Watching a VCR Image
36 • Watching a Camcorder/Game Console Image
38 • Connecting PC(15Pin D-Sub)
40 • Connecting PC(DVI)

APPLICATION

MISC.

76 • Before Requesting Service
77 • SPECIFICATIONS

CONTENTS

43 • Selecting Picture Mode 59 •

MENU Background, Languages

44 • Customizing Picture

and key pad Lock Setting

46 •

Adjusting Screen Size

61 •

Enhancer Demo and Auto

48 •

Adjusting Screen Position and Size Power Setting.
50 • Enlarging Screen Size 63 • Closed Caption Setting
52 • Watching a Still Image 65 • Time Setting
53 • Adjusting Auto Sound Mode 67 • Image Sticking
54 • Customizing Sound Mode Minimization(ISM)
56 • Selecting INPUT SIGNAL 69 • Parental Lock Setting
58 •

Checking the Current Input Signal

73 • Initialize Setting
75 • Setting Sleep Timer

Panel Controls

14

Front Panel, Back Panel, Remote Control

*

Items having same names on Plasma display and the remote control would function in exactly
the same way.

Front

Rear

Power

•

Power control sensor

•

Power Standby: Red - Standby

Green - ON

•

Power button

Select when adjusting volume or
select/adjust “MENU.”

Press when moving “MENU.”

STAND BY/OPERATE

DVI-D INPUT ANT

Used when
manufacturing(For
manufacturer use
only)

PC INPUT(15 pin
D-sub)

DVI-D
INPUT

COMPONENT A/V jacks
(DTV/DVD INPUT jacks)

S-VIDEO,
A/V INPUT,
Cable
Receiver
INPUT
jacks

External
Speaker

Power

ANT

Monitor out

15

Remote Control

When Using Remote Control:

•

Be sure not to allow the Remote Control to drop or to become wet.

•

Keep it away from hot or moist locations.

Installing the Batteries in your Remote Control:

•

Push to open the cover of the remote controller

•

Set the batteries in the battery cell after checking the
electrode, and then shut the cover.

TV/VIDEO(DVD)/SAT/CATV

Use to select channel directly 0~9

Indicates the current state and resolution.

Use this function to make video input selection.

It changes in the following sequence

TV -> Video1 -> Video2 -> TV

Used to zoom the screen. To enlarge, press the(+)

button, and to recturn to the previous condition,

press the(-) button.(Zoom Mode : Zoom 0~20)

Used to display a desired menu.

Pressing the Power button of the Monitor
allows the Display to be standby. (Red light
is shown in the Remote Control Sensor.)
At this time, if you press the Power button
of the Remote Control, the Display is
turned ON (Green light in the Sensor).

Use it when selecting a channel number of
over 100

Use this function to make video input selection.
It changes in the following sequence DVI -> PC

-> Component 1-> Component 2 -> DVI

Adjusts the size of the screen
(Normal, 16:9, etc.)

This feature allows you to choose the caption.

Display button

TV/VIDEO

ZOOM button

Menu button

Volume button ◀◀/▶▶Adjusts the volume.

Screen Size button

Caption button

Power button

100

Channel number (0~9)

Multimedia

CH button ▼▼/▲▲Adjusts the channel.

Note

• Use two “AAA” batteries.

• Be sure to use replacement batteries of the

same type as the original ones.

• The life of a battery depends on how much
it has been used.

*

The number in

()

indicates the page in which

the function of each button is explained in detail.

It recturns to previous channel.

Previous Channel button

Mute sound.

Mute button

Every press of the button cycles through the

four different.

Normal -> Movie -> Music -> News -> User.

Picture Mode button

This feature allows you to select the language and

stereo sound while broadcasting

MTS button

The feature either memorizes the current channel

or erases a channel that has previously memorized

CHANNEL ADD/ERASE

VIDEO/DVD Function

Used to view a still picture during watching
moving images.(Sound can be heard.)

Still button

Every press of the button cycles through the five different
modes: Normal -> Movie -> Music -> News -> User.

Sound Mode button

Each time you press this button, a different input mode
appears. The sequence is as follows: 15Min. -> 30Min. ->
60Min. -> 90Min. -> 120Min. -> OFF
After the time is selected, it automatically becomes stand­by state.

Sleep Timer button

V
O
L

DISPLAY

Z

P

R

E

MUTE

PICTURE

VIDEO/

DVD SATTV CATV

-

M

O

O

V

C

H

REC

PREV

OPEN/CLOSE

MODE

ADD/

MTS

ERASE

CH

MENU

CH

PLAYF.R/SLOW

STOP

SOUND

MODE

SLEEP

POWER

MULTIMEDIATV/VIDEO

Z

O

R

C

S

CAPTION

F.F/SLOW

PAUSE

NEXT

STILL

O

M

+

S

N

E

E

V

O

L

E

Z

I

To setup device change of remote control

16

- The remote control is setup to be used for operating the HDTV provided together.
You may also setup the remote control in order to operate cable TV receiver or video, etc with a remote control.

METHOD TO SETUP DEVICE CHANGE OF REMOTE CONTROL

• Ensure that power plugs of the outside device to be used are connected and that power turns off.

• Find the code number of the outside device to be used in the code list (See Setup Code of Remote Control).

• Continue to press the device change button related with the outside device to be used when the device
change lamp (video / cable) flashes.

• With the remote control oriented downward, enter the remote control setup code number made of three

numbers by using the number button of the remote control. If the code is correctly entered, power will turn on
in the designated device (if no power turns on, repeat this process by using another code).

• Continue to press the device change button until the device change lamp flashes three times.

Remote Control Setup Code

Cable TV receiver

Brand Code

Panasonic 046 049
Philips 009 015 016 023

064 078 083
Samsung 001 033 067
Toshiba 054

Video

Brand Code

Daewoo 001 007 009 012 060 061

086 088 090 094 095 096

JVC 013 030 032 040 044 046

051 056 103 119 121 128
166

Mitzubisi 014 020 041 042 045 047

055 057 120 145

LG 013 014 020 079 084 092

099 127

Panasonic 062 066 070 078 106 114

122 146 147 156 160 161

Philips 030 032 033 050 063 067

079

Samsung 031 038 080 082 083 085

087 090 091 093 097 098

101 153 163
Sharp 030 050 118 143 150 164
Sony 005 011 030 048 052 053

054 072 073 074 118 136

151

Method to setup device change of remote control

Notices:

Caution

• l All the preset codes are erased when replacing the battery.
l In this case, you must reset the remote control again.

Antenna Connection

17

1. Connect the feeder cable of the antenna to the combining adapter.

2. Connect the combining adapter to the antenna input at the back of the TV set.

WHEN THE IMAGE IS NOT CLEAR

Unclear screen image and bad
reception may be a cause of wrong
antenna connection. Be sure to check
its direction and place when installing.

WHEN USING THE COMBINING ADAPTER

You may obtain the combining adapter
at your closest Service Center.

Antenna Input

Indoor Antenna Connection

CTV Antenna Connection

18

- Such community TV Antenna installation may be found in most of co-op apartments.

- If you use the provided coaxial cable, only plug the calbe.(recommendation)

When a coaxial cable is used

Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right.

When a feeder cable is used

ANT/CABLE 1

ANT/CABLE 1

Provided coaxial cable

19

Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private

houses

Single Antenna Connection.

Separate Antenna Connection.

VHF Antenna

UHF Antenna

ANT/CABLE 1

ANT/CABLE 1

Outdoor Antenna Connection

To Watch TV

20

- Buttons with same name in the pdp set performs same function.

VIDEO/

DVD SATTV CATV

DISPLAY

MULTIMEDIATV/VIDEO

CH

CH

V
O
L

V
O
L

Z

O

O

M

+

Z

O

O

M

-

MENU

P

R

E

V

C

H

S

C

R

E

E

N

S

I

Z

E

MUTE

CAPTION

F.F/SLOW

PLAYF.R/SLOW

REC

STOP

PAUSE

PREV

OPEN/CLOSE

NEXT

PICTURE

MODE

SOUND

MODE

STILL

POWER

MTS

ADD/

ERASE

SLEEP

Press the “Main Power” button of the
pdp set.

•The buttons of the remote control and the
pdp set operate only when pressing the
“Main Power” button of the pdp set.
The remote control and the pdp set do not
operate if turning the “Main Power” button of
the pdp set off.

To mute the sound

1. Press the “Mute” button.

2. No sound is heard if “Mute” is displayed on

the screen.

3. Sound is heard again if pressing the “Mute”

button once again.
For example, please use this button when
telephone rings or when guest comes while
watching TV.

Check of TV operation status

• If pressing the “Display” button, status of

channel or broadcasting being currently
watched or entry status of video component
is displayed on the screen.

To Watch TV

When pressing the Channel button

•Select two digits if using the number button
for channel selection.
For example, to watch the No.9 channel,
Press the number button 0 and 9.
If pressing only number 9, it takes long time
for selecting channel.