Technical Data Sheet
Model:
WMETPH
Part Numbers:
WMETPHPS
Polished Finish
Stainless steel screws are included to install into
adequate structural blocking.
WMETPHSN
Satin Finish
MODERN Elegance
™
Single Toilet Paper Holder
Contemporary design combines with PATENTED BridgeBind
Technology resulting in bathroom accessories with:
• Unparalleled strength
• Beauty
• Functionality
• Durability
• No lines for dirt to collect
(maintenance free)
MECHANICAL DATA
Height: 2” (5.1c m)
Width: 7.5” (2 1cm)
PRODUCT COMPOSITION
Entire product is 18/8 (304) solid stainless steel.
MODALITY
Use: Wall Installation.
INSTALLATION
WINGITS® MODERN Elegance™ Single Toilet Paper Holders are designed to be installed into
adequate structural blocking.
RECOMMENDED INTEGRATION
For the strongest possible installation, it is recommended that WINGITS® Master Anchor for
MODERN Elegance™ Bath Accessories (MAWME35) is used with this product.
Toll Free: 877-894-6448 • www.wingits.com • sales@wingits.com
™
WMETPH_SpecSheet_20140226_rev4
Technical Data Sheet
FRONT
2"(5.1cm)
TOP
3.625"(9.2cm)
7.5"(19.1cm)
7.5"(21cm)
BACK
5.5"(14cm)
2"(5.1cm)
Use the Toilet Paper Holder as its own template.
Put pin to wall to mark drilling location.
SIDE
2"(5.1cm)
3.625"(9.2cm)
INCLUDED HARDWARE OPTIONAL HARDWARE
Allen Wrench x 1 Set Screw x 2S/S Screw for Blocking x 23M® Waterproof ME Tape x 2
WINGITS® Master Anchor for MODERN Elegance
Toll Free: 877-894-6448 • www.wingits.com • sales@wingits.com
(Sold Separately)
™
Bath Accessories (MAWME35) x 2
WMETPH_SpecSheet_20140226_rev4
Loading...