
Technical Data Sheet
Model:
WMESRH
Part Numbers:
WMESRHPS
Polished Finish
Stainless steel screws are included to install into
adequate structural blocking.
WMESRHSN
Satin Finish
MODERN Elegance
™
Stainless Steel Single Robe Hook
Contemporary design combines with PATENTED BridgeBind
Technology resulting in a Robe Hook Holder with:
• Unparalleled strength
• Beauty
• Functionality
• Durability
• No lines for dirt to collect
(maintenance free)
BridgeBind™ Technology is the result of drilling a hole completely through stainless steel
tubing, inserting a solid stainless steel pin, and HeliArc Welding the pin to the far point of
the tube; solidifying the pin and tube into one piece. Creating the ultimate structural bond.
MECHANICAL DATA
Height: 1.625” (4.1cm)
Width: 1.625” (4.1cm)
Depth: 2.25” (5.7cm)
PRODUCT COMPOSITION
Entire product is solid 18/8 (304) HeliArc welded stainless steel.
MODALITY
Use: Can be used in horizontal or vertical position.
INSTALLATION
WINGITS® Stainless Steel Single Robe Hooks are designed to be installed into adequate
structural blocking or with optional WINGITS® Fastener.
RECOMMENDED INTEGRATION
It is recommended that WINGITS® Master Anchor for MODERN Elegance™ Bath Accessories
(MAWME35) is used with this product.
Weight: 3.5oz. (98g)
Toll Free: 877-894-6448 • www.wingits.com • sales@wingits.com
™
WMESRH_SpecSheet_20140305_rev4

Technical Data Sheet
FRONT
1.625" (4.1cm)
TOP
2.25" (5.7cm)
1.625" (4.1cm)
1.625" (4.1cm)
BACK
0.8125" (2.1cm)
1.625" (4.1cm)
0.5" (1.3cm)
SIDE
1.625" (4.1cm)
2.25" (5.7cm)
BridgeBind™ Technology:
Solid stainless steel pin is HeliArc
welded thru solid stainless steel rod.
Use the Robe Hook as its own template.
Put pin to wall to mark drilling location.
INCLUDED HARDWARE OPTIONAL HARDWARE
(Sold Separately)
Allen Wrench x 1 Set Screw x 1S/S Screw for Blocking x 13M® Waterproof ME Tape x 1
WINGITS® Master Anchor for MODERN Elegance
Bath Accessories (MAWME35) x 1
Toll Free: 877-894-6448 • www.wingits.com • sales@wingits.com
™
WMESRH_SpecSheet_20140305_rev4