WINGITS WMEHVTPHxx User Manual
Technical Data Sheet
Model:
WMEHVTPH
Part Numbers:
WMEHVTPHPS
Polished Finish
Stainless steel screws are included to install into
adequate structural blocking.
WMEHVTPHSN
Satin Finish
MODERN Elegance
™
Horizontal Vertical Toilet Paper Holder
Contemporary design combines with PATENTED BridgeBind
Technology resulting in a Toilet Paper Holder with:
• Unparalleled strength
• Beauty
• Functionality
• Durability
• No lines for dirt to collect
(maintenance free)
BridgeBind™ Technology is the result of drilling a hole completely through stainless steel
tubing, inserting a solid stainless steel pin, and HeliArc Welding the pin to the far point of
the tube; solidifying the pin and tube into one piece. Creating the ultimate structural bond.
MECHANICAL DATA
Height: 1.625” (4.1cm)
Width: 6” (15.2cm)
Depth: 3” (7.6 c m)
PRODUCT COMPOSITION
Entire product is 18/8 (304) stainless steel. Solid caps and pins are HeliArc welded to 18 gauge
tube.
MODALITY
Use: Can be used in horizontal or vertical position.
INSTALLATION
Install WINGITS® MODERN Elegance™ Horizontal Vertical Toilet Paper Holders into adequate
structural blocking (included s/s screws) or into hollow walls with WINGITS® Anchor.
RECOMMENDED INTEGRATION
It is recommended that WINGITS® Master Anchor for MODERN Elegance™ Bath Accessories
(MAWME35) is used with this product.
Toll Free: 877-894-6448 • www.wingits.com • sales@wingits.com
™
WMEHTPH_SpecSheet_20140226_rev7
Technical Data Sheet
1” (2.5cm)
6” (15.2cm)
1” (2.5cm)
1.625” (4.1cm)
3” (7.6cm)
FRONT
0.75” (1.9cm)
SIDE
1.625” (4.1cm)
TOP
Use the toilet paper holder as its
own template. Put pin to wall
to mark drilling location.
BridgeBind™ Technology:
Solid stainless steel pin is HeliArc
welded to stainless steel tube.
INCLUDED HARDWARE OPTIONAL HARDWARE
(Sold Separately)
Allen Wrench x 1 Set Screw x 1S/S Screw for Blocking x 13M® Waterproof ME Tape x 1
WINGITS® Master Anchor for MODERN Elegance
Bath Accessories (MAWME35) x 1
™
Toll Free: 877-894-6448 • www.wingits.com • sales@wingits.com
WMEHTPH_SpecSheet_20140226_rev7
Loading...