WINGITS WIEHVTPH User Manual

Technical Data Sheet

Model:

WIEHVTPH

Part Numbers:

WIEHVTPHPS

Polished Finish

Stainless steel screws are included to install into
adequate structural blocking.

WIEHVTPHSN

Satin Finish

INFINITE Elegance

™

Horizontal Vertical Toilet Paper Holder

Contemporary design combines with a fully HeliArc welded construction,
resulting in a Toilet Paper Holder with:

• Unparalleled strength

• Beauty

• Functionality

• Durability

• No lines for dirt to collect
(maintenance free)

MECHANICAL DATA

Height: 2" (5 .1cm)
Width: 6.75" (17.1c m)
Depth: 3" (7.6 c m)

PRODUCT COMPOSITION

Entire product is 18/8 (304) stainless steel. Solid caps and pins are HeliArc welded to 18 gauge
tube.

MODALITY

Use: Can be used in horizontal or vertical position.

INSTALLATION

Install WINGITS® INFINITE Elegance™ Horizontal Vertical Toilet Paper Holders into adequate
structural blocking (included S/S screws) or into hollow walls with WINGITS® Fastener.

RECOMMENDED INTEGRATION

It is recommended that WINGITS® Master Anchor for INFINITE Elegance™ Bath Accessories
(MAW35) is used with this product.

Toll Free: 877-894-6448 • www.wingits.com • [e-mail]

WIEHVTPH_SpecSheet_20140403_rev3

Technical Data Sheet

FRONT

1" (2.5cm)

0.625" (1.6cm)

6.75" (17.1cm)

SIDE

1" (2.5cm)

2" (5.1cm)

3" (7.6cm)

2" (5.1cm)

TOP

Fully HeliArc welded construction

INCLUDED HARDWARE OPTIONAL HARDWARE

(Sold Separately)

Allen Wrench x 1 Set Screw x 1S/S Screw for Blocking x 13M® Waterproof ME Tape x 1

WINGITS® Master Anchor for INFINITE Elegance

Bath Accessories (MAW35) x 1

Toll Free: 877-894-6448 • www.wingits.com • [e-mail]

™

WIEHVTPH_SpecSheet_20140403_rev3