WINGITS WGB6TRxx User Manual

Technical Data Sheet

Model:

WGB6TR

Part Numbers:

WGB6TR12W

12’’ Heavy Structural Aluminum Tube Core

WGB6TR16W

16’’ Heavy Structural Aluminum Tube Core

WGB6TR18W

18’’ Heavy Structural Aluminum Tube Core

WGB6TR24W

24’’ Heavy Structural Aluminum Tube Core

WGB6TR30W

30’’ Heavy Structural Aluminum Tube Core

WGB6TR32W

32’’ Heavy Structural Aluminum Tube Core

WGB6TR36W

36’’ Heavy Structural Aluminum Tube Core

WGB6TR42W

42’’ Heavy Structural Aluminum Tube Core

WGB6TR48W

48’’ Heavy Structural Aluminum Tube Core

TRUE Elegance

™

Stainless Steel Designer Grab Bar

• All parts are Stainless Steel - tubing is 18-gauge (1.2mm)

• Mounting Flanges are 3”(75mm) in diameter, 3/32”(2.5mm) thick, HeliArc

welded to the tubing. Mounting Flanges have 5 holes for attachment to WINGITS
or adequate blocking.

• Snap-On Flange Covers are 22 gauge (0.8mm) drawn stainless steel, 3”(76mm)
in diameter and 3/8”(10mm) in height.

• Provide 1-1/2”(38mm) clearance from wall.

• Anti-Slip Grab Bar

MECHANICAL DATA

Width: See product part number for width. Complete length of Grab Bar is usable surface.
Diameter: 1.50” (3.8cm)

PRODUCT COMPOSITION

Entire product is stainless steel.

MODALITY

Use: Wall Installation.
Load Capability: 800 lbs (362.9kg)

INSTALLATION

®

W

INGITS

TRUE Elegance Structural Stainless Steel Grab Bars are designed to hold live loads and

must be installed into adequate structural blocking or with WINGITS® Grab Bar Fasteners

CERTIFICATIONS

®

W

INGITS

TRUE Elegance
applicable requirements of all building codes, ADA criteria, and 2010 ADAAG and
2009 ANSI standards.

RECOMMENDED INTEGRATION

or hollow wall construction, it is recommended that W

F
are used with this product. See Fastener instructions for applications.

™

™

Structural Stainless Steel Grab Bars meet or exceed the

®

INGITS

Grab Bar Fasteners

Toll Free: 877-894-6448 • www.wingits.com • [e-mail]

20140911_rev1

20140815_rev1

1.50’’

Technical Data Sheet

Overall Length

(Mounting Length +3’’)

Mounting Center Length

(12’’ to 48’’)

2.75’’

Holes - 1/4”
Slots - 1/4” x 1/2”
(used when installing with
the WINGITS® Grab Bar
Fastening System)

Bolt Circle is 2.3125”

3’’

Grab Bar
Mounting Flange

Grab Bar Tube

Overall Length

(Mounting Length +3’’)

Snap-on Cover

3”

.5” Cover

Height

INCLUDED HARDWARE

Stainless Steel Screws x 6

OPTIONAL HARDWARE

(Sold Separately)

Grab Bar WingIts (GBW40) x 2 Reverse Grab Bar WingIts (SRGBW40) x 2 RES WingIts (RESGBW35) x 2

Toll Free: 877-894-6448 • www.wingits.com • [e-mail]