WINGITS WGB5YSWH User Manual
Technical Data Sheet
Model:
WGB5YS
Part Numbers:
WGB5YS12
12’’ Painted Finish
WGB5YS16
16’’ Painted Finish
WGB5YS18
18’’ Painted Finish
WGB5YS24
24’’ Painted Finish
WGB5YS30
30’’ Painted Finish
WGB5YS32
32’’ Painted Finish
WGB5YS36
36’’ Painted Finish
WGB5YS42
42’’ Painted Finish
WGB5YS48
48’’ Painted Finish
PREMIUM
™
Superior Poly-Painted
• All parts are Stainless Steel - tubing is 18-gauge (1.2mm)
• Mounting Flanges are 3”(75mm) in diameter, 3/32”(2.5mm) thick, HeliArc
welded to the tubing. Mounting Flanges have 5 holes for attachment to WINGITS
or adequate blocking.
• Snap-On Flange Covers are 22 gauge (0.8mm) drawn stainless steel, 3”(76mm)
in diameter and 3/8”(10mm) in height.
• Provide 1-1/2”(38mm) clearance from wall.
MECHANICAL DATA
Width: See product part number for width. Complete length of Grab Bar is usable surface.
Diameter: 1.25” (3.2cm)
PRODUCT COMPOSITION
Entire product is stainless steel.
MODALITY
Use: Wall Installation.
Load Capability: 800 lbs (362.9kg)
INSTALLATION
®
W
INGITS
PREMIUM™ Structural Stainless Steel Grab Bars are designed to hold live loads and
must be installed into adequate structural blocking or with WINGITS® Grab Bar Fasteners
CERTIFICATIONS
®
W
INGITS
PREMIUM™ Structural Stainless Steel Grab Bars meet or exceed the
applicable requirements of all building codes, ADA criteria, and 2010 ADAAG and
2009 ANSI standards.
RECOMMENDED INTEGRATION
®
INGITS
For hollow wall construction, it is recommended that W
are used with this product. See Fastener instructions for applications.
Grab Bar Fasteners
Toll Free: 877-894-6448 • www.wingits.com • sales@wingits.com
20140822_rev3
20140815_rev1
Length
Snap On Flanges
Mount with 2 Screws
Top and Bottom
WINGIT P/N DIMENSION DESCRIPTION
WGB5YS12zz 12” x 1.25 12” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS16zz 16” x 1.25 16” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS18zz 18” x 1.25 18” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS24zz 24” x 1.25 24” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS30zz 30” x 1.25 30” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS32zz 32” x 1.25 32” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS36zz 36” x 1.25 36” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS42zz 42” x 1.25 42” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS48zz 48” x 1.25 48” Polyester Paint Stainless Steel 1.25” OD Grab Bar
Options For Polyester Paint “zz” (Finish): BO = BONE, BI = BISCUIT, ORB = OIL RUBBED BRONZE,
BLKORB = BLACK OIL RUBBED BRONZE, WH = WHITE
Technical Data Sheet
BONE
BISCUIT
OIL-RUBBED BRONZE
BLACK
OIL-RUBBED BRONZE
Holes - 1/4”
Slots - 1/4” x 1/2”
(used when installing with
the WINGITS® Grab Bar
Fastening System)
Bolt Circle is 2.3125”
INCLUDED HARDWARE
Stainless Steel Screws x 6
Grab Bar
Mounting Flange
Grab Bar Tube
Snap-on Cover
OPTIONAL HARDWARE
(Sold Separately)
Grab Bar WingIts (GBW40) x 2 Reverse Grab Bar WingIts (SRGBW40) x 2 RES WingIts (RESGBW35) x 2
Toll Free: 877-894-6448 • www.wingits.com • sales@wingits.com
3”
WHITE
.5” Cover
Height
Loading...