WINGITS WGB5PSxx User Manual

Technical Data Sheet

Model:

WGB5

Part Numbers:

WGB5PS12 WGB5SS12

12” Polished Finish

WGB5PS16

16” Polished Finish

WGB5PS18

18” Polished Finish

WGB5PS24

24” Polished Finish

WGB5PS30

30” Polished Finish

WGB5PS32

32” Polished Finish

WGB5PS36

36” Polished Finish

WGB5PS42

42” Polished Finish

WGB5PS48

48” Polished Finish

12” Satin Finish

WGB5SS16

16” Satin Finish

WGB5SS18

18” Satin Finish

WGB5SS24

24” Satin Finish

WGB5SS30

30” Satin Finish

WGB5SS32

32” Satin Finish

WGB5SS36

36” Satin Finish

WGB5SS42

42” Satin Finish

WGB5SS48

48” Satin Finish

PREMIUM

™

Stainless Steel Grab Bar

• All parts are Stainless Steel - tubing is 18-gauge (1.2mm)

• Mounting Flanges are 3”(75mm) in diameter, 3/32”(2.5mm) thick, HeliArc

welded to the tubing. Mounting Flanges have 5 holes for attachment to WINGITS
or adequate blocking.

• Snap-On Flange Covers are 22 gauge (0.8mm) drawn stainless steel, 3”(76mm)
in diameter and 3/8”(10mm) in height.

• Provide 1-1/2”(38mm) clearance from wall.

MECHANICAL DATA

Width: See product part number for width. Complete length of Grab Bar is usable surface.
Diameter: 1.25” (3.2cm)

PRODUCT COMPOSITION

Entire product is stainless steel.

MODALITY

Use: Wall Installation.
Load Capability: 800 lbs (362.9kg)

INSTALLATION

®

W

INGITS

PREMIUM™ Structural Stainless Steel Grab Bars are designed to hold live loads and

must be installed into adequate structural blocking or with WINGITS® Grab Bar Fasteners

CERTIFICATIONS

®

W

INGITS

PREMIUM™ Structural Stainless Steel Grab Bars meet or exceed the
applicable requirements of all building codes, ADA criteria, and 2010 ADAAG and
2009 ANSI standards.

RECOMMENDED INTEGRATION

®

INGITS

For hollow wall construction, it is recommended that W
are used with this product. See Fastener instructions for applications.

Grab Bar Fasteners

Toll Free: 877-894-6448 • www.wingits.com • [e-mail]

20140822_rev3

20140815_rev1

1.25’’

Technical Data Sheet

Overall Length

(Mounting Length +3’’)

Mounting Center Length

(12’’ to 48’’)

2.75’’

Holes - 1/4”
Slots - 1/4” x 1/2”
(used when installing with
the WINGITS® Grab Bar
Fastening System)

Bolt Circle is 2.3125”

3’’

Grab Bar
Mounting Flange

Grab Bar Tube

Overall Length

(Mounting Length +3’’)

Snap-on Cover

3”

.5” Cover

Height

INCLUDED HARDWARE

Stainless Steel Screws x 6

OPTIONAL HARDWARE

(Sold Separately)

Grab Bar WingIts (GBW40) x 2 Reverse Grab Bar WingIts (SRGBW40) x 2 RES WingIts (RESGBW35) x 2

Toll Free: 877-894-6448 • www.wingits.com • [e-mail]