WINGITS WGB5PSKNxx User Manual

Technical Data Sheet

Model:

WGB5KN

Part Numbers:

WGB5PSKN12

12’’ Polished Finish

WGB5PSKN16

16’’ Polished Finish

WGB5PSKN18

18’’ Polished Finish

WGB5PSKN24

24’’ Polished Finish

WGB5PSKN30

30’’ Polished Finish

WGB5PSKN32

32’’ Polished Finish

WGB5PSKN36

36’’ Polished Finish

WGB5PSKN42

42’’ Polished Finish

WGB5PSKN48

WGB5SSKN12

12” Satin Finish

WGB5SSKN16

16” Satin Finish

WGB5SSKN18

18” Satin Finish

WGB5SSKN24

24” Satin Finish

WGB5SSKN30

30” Satin Finish

WGB5SSKN32

32” Satin Finish

WGB5SSKN36

36” Satin Finish

WGB5SSKN42

42” Satin Finish

WGB5SSKN48

48” Satin Finish48’’ Polished Finish

PREMIUM

™

Stainless Steel Grab Bar - Knurled

• All parts are Stainless Steel - tubing is 18-gauge (1.2mm)

• Mounting Flanges are 3”(75mm) in diameter, 3/32”(2.5mm) thick, HeliArc

welded to the tubing. Mounting Flanges have 5 holes for attachment to WINGITS
or adequate blocking.

• Snap-On Flange Covers are 22 gauge (0.8mm) drawn stainless steel, 3”(76mm)
in diameter and 3/8”(10mm) in height.

• Provide 1-1/2”(38mm) clearance from wall.

• Anti-Slip Grab Bar

MECHANICAL DATA

Width: See product part number for width. Complete length of Grab Bar is usable surface.
Diameter: 1.25” (3.2cm)

PRODUCT COMPOSITION

Entire product is stainless steel.

MODALITY

Use: Wall Installation.
Load Capability: 800 lbs (362.9kg)

INSTALLATION

®

W

INGITS

PREMIUM™ Structural Stainless Steel Grab Bars are designed to hold live loads and

must be installed into adequate structural blocking or with WINGITS® Grab Bar Fasteners

CERTIFICATIONS

®

W

INGITS

PREMIUM™ Structural Stainless Steel Grab Bars meet or exceed the
applicable requirements of all building codes, ADA criteria, and 2010 ADAAG and
2009 ANSI standards.

RECOMMENDED INTEGRATION

®

INGITS

For hollow wall construction, it is recommended that W
are used with this product. See Fastener instructions for applications.

Grab Bar Fasteners

Toll Free: 877-894-6448 • www.wingits.com • [e-mail]

20140827_rev1

20140815_rev1

1.25’’

Technical Data Sheet

Overall Length

(Mounting Length +3’’)

Mounting Center Length

(12’’ to 48’’)

2.75’’

Holes - 1/4”
Slots - 1/4” x 1/2”
(used when installing with
the WINGITS® Grab Bar
Fastening System)

Bolt Circle is 2.3125”

3’’

Grab Bar
Mounting Flange

Grab Bar Tube

Overall Length

(Mounting Length +3’’)

Snap-on Cover

3”

.5” Cover

Height

INCLUDED HARDWARE

Stainless Steel Screws x 6

OPTIONAL HARDWARE

(Sold Separately)

Grab Bar WingIts (GBW40) x 2 Reverse Grab Bar WingIts (SRGBW40) x 2 RES WingIts (RESGBW35) x 2

Toll Free: 877-894-6448 • www.wingits.com • [e-mail]