WINGITS GBWME40 User Manual
®
WINGITS
World’s Strongest Fastener
MODERN Elegance™ GBWME40
Structural Stainless Steel Grab Bar WingIts
Features / Benefits
• Exceeds ADA Guidelines and ALL Building Codes
• Eliminates the need for structural blocking
• NEVER Loosens
• Waterproof & Fire-proof
• Rated to 800 lbs. in drywall and tile
®
• Installs WINGITS
• Patented Worldwide
MODERN Elegance™ Grab Bars
®
GBWME40
®
Install WINGITS® GBWME40 Fastener Quickly and Easily
with the APACHE200 Carbide Drill Bit
Industrial Grade Carbide Drill Bit
• Rated at 200 holes in ceramic wall tile
• Drills holes through ceramic wall tiles in seconds
• No hammer drill required - this precision cutting drill does all the work
• Industrial grade carbide cutting tool
• Engineered for standard and cordless drills
• Designed for ceramic, marble and plaster, steel, glass and lathe
Installation Videos can be viewed at:
www.wingits.com
Bradley Beach, NJ USA • Toll Free: 877-894-6448
www.wingits.com • sales@wingits.com
* in approved substrates
WINGITS
®
Installation Instructions
GBWME40
MODERN Elegance™ WINGITS
MODERN Elegance™ Grab Bar Fastening System Installation Guide WINGITS
®
Grab Bar Fastening Systems
®
Exceeds Building Codes For Grab Bars In The Following Wall Substrates:
• 5/8” drywall - painted or wallpapered
• 1/2” or 5/8” drywall with tub surrounds
• 1/2” or 5/8” drywall with tile, marble or stone
• 1/2” or 5/8” drywall with any panel types including
fiberglass, faux marble, acrylic and plastics
• Multiple layers of drywall
• Plaster and lathe
• 1/4” acrylic / fiberglass tub surrounds
• Most wall panels, all masonary type boards, with or without decorative panels
MODERN Elegance™ uses Indicator Points to simplify installation.
1. Remove the stand-offs to expose the INDICATOR POINTS on the accessory.
2. To ensure adequate clearance, a stud finder should be used to verify there are no studs within the area where the WingIts™ will be installed.
Make sure that there is at least 1.5” away from the edge of the stud.
3. Place the accessory in the preferred location and push on the accessory to mark the points where stand-offs will be mounted.
GBWME40
INDICATOR POINT
Installing MODERN Elegance™ Grab Bars
1. Drill 1.25” hole on the marks by the INDICATOR POINTS.
2. Peel one side off of waterproof tape and adhere around drilled hole in wall.
3. Remove center SCREW completely.
4. Insert SCREW through STAND-OFF and rethread into fastener.
5. Insert the WingIts™ into the wall.
6. Push the SCREW head all the way into the STAND-OFF until the wings “POP” behind the wall.
7. Pull on STAND-OFF, remove tape liner - keep STAND-OFF away from wall as you tighten.
8. Attach Grab Bar and tighten set screws.
FLAT FOR SCREW
SCREW
WINGS
MODERN Elegance™ Installation Guide Specifications
DESCRIPTION INCLUDED OPTIONAL
Grab Bars 2.5’’ s/s screws GBWME40
Towel Bars (all) 1-5/8’’ s/s screws MAWME35 (WINGITS)
Robe Hooks (all) 1-5/8’’ s/s screws MAWME35 (WINGITS)
Toilet Paper Holder
Vertical 2’’ s/s screw MAWSD35 (WINGITS)
Single 1-5/8’’’ s/s screws MAWME35 (WINGITS)
Vertical Towel Racks* MAWME35 (WINGITS) 1-5/8’’’ s/s screws
SPIRE Towel Vine* MAWME35 (WINGITS) 1-5/8’’’ s/s screws
SCOOP Towel Vine* MAWME35 (WINGITS) 2’’ s/s screws
WAVE Foot Rest* MAWSD35 (WINGITS) 2.5’’ s/s screws
Bariatric Grab Bars 2.5’’ s/s screws GBW40
Mounting of the Stand-Off Screws MUST be installed into adequate structural blocking.
Bradley Beach, NJ USA • Toll Free: 877-894-6448
www.wingits.com • sales@wingits.com
STAND-OFF
View Installation Videos at:
www.wingits.com
W12-02122013
Loading...