Wine racks America Table Top Racks Assembly Manual
Table Top Racks
Assembly GUIDE
Page 1
Questions?
888.373.6057
or visit
wineracksamerica.com
Depending on the model you purchased, your bundle should contain the following:
LEFT
END LADDER
Package Contents tools for assembly
*Please verify that you have the correct number of parts before proceeding.
RIGHT
END LADDER
MIDDLE
LADDER
KITCHEN MODEL MIDDLE LADDERS
24 BOTTLE RACK [3x]
36 BOTTLE RACK [5x]
48 BOTTLE RACK [3x]
64 BOTTLE RACK [7x]
STANDARD CONNECTOR (X4)
SCAN FOR
ASSEMBLY VIDEO
Required
Screwdriver
SOLID TOP (X1)
SCREW COVERS
* All models follow the same assembly procedure varying only in the number of middle ladders your rack will require.
WOOD SCREWS
Wood Glue
Suggested
Cordless Drill
Questions?
Table Top Racks
Assembly GUIDE
1. Find an open, flat area in which to work. Carefully remove all components from the box and remove banding
with a utility knife. Check the parts list to verify package contents.
Arrange the end ladders on the floor so that the angled bottle supports face the ground. Align the large gaps on each
2.
end ladder. The end with the larger gap is the top of your rack. Attach a standard column connector to the top and
bottom of your rack using the screws provided. Make sure the connectors are flush with the top and bottom of your
rack. (figure 1)
1
Page 2
BEGIN WITH BACK
OF RACK
888.373.6057
or visit
wineracksamerica.com
Top of rack
3. Insert the middle ladders and finish securing the top & bottom connectors using the screws provided. Make sure
that the angled bottle supports are facing the ground. (figure 2)
FINISH SECURING BACK
2
CONNECTORS
Loading...