Wine racks America Solid Diamond Cube Assembly Manual
Solid Diamond Cube
Assembly GUIDE
Top Panel
Page 1
Questions?
888.373.6057
or visit
wineracksamerica.com
Side Panel
Short Middle
Bottom Panel
Package Contents tools for assembly
*Please verify that you have the correct number of parts before proceeding.
Depending on the model you purchased, your bundle should contain the following:
Long Middle
SCAN FOR
ASSEMBLY VIDEO
Trim Piece
Required
TOP PANEL (x1)
34 7/8"
34 7/8"
LONG MIDDLE (x2)
47 1/4"
47 1/4"
BOTTOM PANEL (x1)
33 7/8"
33 7/8"
SHIM (x1)
10"
SIDE PANEL (x2)
35 5/16"
SMALL MIDDLE (x4)
23 5/8"
TRIM PIECE (x1)
34 7/8"
WOOD SCREWS FINISH NAILS
WOOD PUTTY
Screwdriver
Wood Glue
Suggested
Cordless Drill
Hammer
Rubber Mallet
Finish Nailer
Nail Setter
Questions?
Solid Diamond Cube
Assembly GUIDE
1. Find an open, flat area in which to work. Carefully remove all components from the box and remove banding or
protective wrapping. Check the parts list to verify package contents.
2.
Using the provided wood screws, attach the bottom panel into the grooves of the two side panels. (figure 1)
ATTACH SIDES
1
TO BOTTOM
Page 2
888.373.6057
or visit
wineracksamerica.com
3. Attach the top panel to the side panel pieces using the wood srews provided. Make sure to keep the side panels
and top panel held tightly together when securing.
It may be easier to stand the rack upright when securing the top frame piece. (figure 2)
SECURE TOP
2
TO FRAME
BOTTOM
OF RACK
Loading...