Wine racks America Point of Purchase Assembly Manual

Point of Purchase

Assembly GUIDE

Standard Riser

Sign Holder

Standard Riser

888.373.6057

Page 1

Short Riser (right)

wineracksamerica.com

Questions?

or visit

Short Riser (left)

Outside Base Support

*Please verify that you have the correct number of parts before proceeding.

Depending on the model you purchased, your bundle should contain the following:

INSIDE BASE

SUPPORT (X2)

OUTSIDE BASE

SUPPORT (X2)

FRONT/BACK

BASE SUPPORT (X2)

Package Contents tools for assembly

SIGN HOLDER (X1)

BOTTLE

HOLDER (X6)

SHORT RISER

LEFT (X1)

SHORT RISER

RIGHT (X1)

Inside Base Support

Front/Back Base Support

STANDARD

RISER (X2)

WOOD PUTTY

WOOD SCREWS

Cordless Drill Utility Knife

Finish Nailer

Wood Glue

FINISH NAILS

Hammer

Nail Setter

Point of Purchase

Assembly GUIDE

Page 2

Questions?

888.373.6057

or visit

wineracksamerica.com

Step 1: Place parts on a flat surface. Use a brad nailer or provided finish nails

to attach front/back base supports to the outside base supports. Use
wood glue for added support. Figure A.

Step 2: Attach right and left side risers to the inside base supports using

Step 2

cordless drill or screwdriver.

Step 1

Step 3

Step 3: Attach risers and inside base supports to the outside base supports
using cordless drill or screwdriver.

Step 4: Attach bottle holders to the risers using a cordless drill or screwdriver.

Step 5

Step 4

Start screws through risers and use them to align to the pre-drilled
holes on the bottle holders. Repeat for all rows.

Step 5: Attach sign holder to the risers using a cordless drill or screwdriver.