Wine racks America Lattice Cube Stemware Assembly Manual

Lattice Cube - Stemware

Assembly GUIDE

Page 1

Questions?

888.373.6057

or visit

wineracksamerica.com

*Please verify that you have the correct number of parts before proceeding.

Depending on the model you purchased, your bundle should contain the following:

SIDE LADDERS (X2)

SCAN FOR

ASSEMBLY VIDEO

Package Contents tools for assembly

Required

TOP PANEL

BOTTOM PANEL

Screwdriver

Suggested

WOOD SCREWS

Cordless Drill

Questions?

Lattice Cube - Stemware

Assembly GUIDE

1. Find an open, flat area in which to work. Carefully remove all components from the box and remove banding
with a utility knife. Check the parts list to verify package contents.

Secure the bottom panel to the bottom of each side ladder using the provided wood screws. The end with the larger

2.

gap is the top of your rack. (figure 1)

Page 2

1

888.373.6057

or visit

wineracksamerica.com

SECURE BOTTOM
PANEL

Top of rack

3. Attach the top panel to the top of each side ladder using the provided wood screws. (figure 2)

SECURE TOP

2

PANEL

4. That’s it! Fill with your favorite stemware and vintage. Stack multiple cubes for a true wine cellar look.