Wine racks America Half Height Case bin Assembly Manual
Side Panel
Half Height Case bin
Assembly GUIDE
Top Panel
Page 1
Questions?
888.373.6057
or visit
wineracksamerica.com
Side Panel
Attach Trim Piece to the
Side Panels using a nail
gun or the provided
finish nails.
Package Contents tools for assembly
*Please verify that you have the correct number of parts before proceeding.
Depending on the model you purchased, your bundle should contain the following:
TOP PANEL (x1)
SIDE PANEL (x2)
Shelf Panel
Trim Piece
Required
Screwdriver
Suggested
Wood Glue
SHELF PANEL (x3)
TRIM PIECE (x1)
WOOD SCREWS FINISH NAILS
WOOD PUTTY
Cordless Drill
Hammer
Finish Nailer
Nail Setter
Questions?
Half Height Case bin
Assembly GUIDE
If you purchased a solid top, secure it by placing a small amount of wood glue on the top of the box frame. Clamp
the top to the frame using standard wood clamps until fully dry. (figure 8)
Page 2
888.373.6057
or visit
wineracksamerica.com
WINERACKSAMERICA.COM
We would love to see your wine racks in use! Please feel free to
send any photos of your racks to photos@wineracksamerica.com
Once again, thank you for your business. Remember, customer
service is available to answer any questions Monday-Friday
7:00 am - 5:00 pm MST. Please feel free to contact us for any
wine storage needs.
360 North 700 West Suite F • North Salt Lake, UT 84054
(toll free) 888-373-6057
(fax) 801-936-0534
Loading...