WIN Enterprises PL-80500 User Manual
User’s Manual
1
PL-80500
Networking Appliance
1U Rack-Mount Intel® Atom Processor C2000 Network System,
8 Copper GbE, SATA, CF, LCM, PCI-E
User’s Manual
Version 1.1
WIN Enterprises, Inc. Sep., 2014
User’s Manual
2
Reversion History
Date
2014/9/8 1.0 First Release T. Sirois
2014/9/20 1.1 Jumper setting section update T. Sirois
Version
Modification
Editor
WIN Enterprises, Inc. Sep., 2014
User’s Manual
3
© Copyright 2004. All Rights Reserved
This document contains proprietary information protected by copyright. All rights are reserved; no
part of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without prior written permission of the manufacturer.
The content of this document is intended to be accurate and reliable; the original manufacturer assumes
no responsibility for any inaccuracies that may be contained in this manual. The original manufacturer
reserves the right to make improvements to the products described in this manual at any time without
prior notice.
Trademarks
IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International business Machine
Corporation
Award is a trademark of Award Software International, Inc
Intel is a trademark of Intel
RTL is a trademark of Realtek
VIA is a trademark of VIA Technologies, Inc
Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered trademarks of
Microsoft Corporation
All other product names mentioned herein are used for identification purpose only and may be
trademarks and/or registered trademarks of their respective companies
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this document, the manufacturer
and distributor assume no liability resulting from errors or omissions in this document, or from the use
of the information contained herein.
For more information on PL-80500 or other WIN Enterprises products, please visit our website:
www.win-ent.com.
For technical supports or free catalog, please send your inquiry to:
sales@win-ent.com.
WIN Enterprises, Inc. Sep., 2014
User’s Manual
4
Table of Contents
Chapter 1. General Information ....................................................................... 5
1.1 Introduction ................................................................................................... 5
1.2 Specifications ................................................................................................ 5
1.3 Order Information.......................................................................................... 7
1.4 Packaging ...................................................................................................... 8
1.5 Precautions .................................................................................................... 8
1.6 System Layout ............................................................................................... 9
1.7 Board Dimensions ....................................................................................... 10
Chapter 2. Connector/Jumper Configuration ................................................11
2.1 Connector/Jumper Location and Definition...................................................11
2.2 Connector and Jumper Setting ..................................................................... 13
2.3 CompactFlashTM Card Socket Pin Define................................................... 23
Chapter 3. Optional GbE Module & Riser Card Setting .............................. 24
3.1 R119: Ethernet module with two GbE Copper and two GbE SFP ................. 24
3.2 R120: Ethernet module with four GbE SFP.................................................. 25
3.3 R121: Ethernet module with two GbE Copper or SFP .................................. 26
3.4 R122: Ethernet module with four GbE Copper............................................. 27
3.5 R127: Ethernet module with eight GbE Copper............................................ 28
3.7 R137: Ethernet module with four GbE Copper............................................. 30
3.8 R117: Riser card for expansion module PCIE x8....................................... 31
3.9 R118: Riser card for PCIE x8 add-on card................................................. 31
3.10 R168: Ethernet module with four GbE Copper and bypass ......................... 32
3.11 R169: Ethernet module with four GbE SFP................................................ 33
3.12 R171: Ethernet module with eight GbE Copper.......................................... 34
3.13 R175: Ethernet module with four GbE Copper and bypass ......................... 35
Chapter 4. Utility & Driver Installation ........................................................... 38
4.1 Operation System Supporting ...................................................................... 38
4.2 System Driver Installation............................................................................ 39
4.3 LAN Driver Installation ............................................................................... 39
Appendix A: Watchdog Timer Programming Guide ........................................... 40
Appendix B: LAN Bypass Programming Guide................................................. 41
Appendix C: Cable Development Kit................................................................. 42
WIN Enterprises, Inc. Sep., 2014
User’s Manual
5
Chapter 1. General Information
1.1 Introduction
The PL-80500 is a 1U rack-mounted hardware platform designed for high
performance network service applications. Supporting the next generation
Intel® Atom™ Processor C2000 product family (formerly codenamed
Rangeley) with 8/4/2 Cores; the new platform comes fully packed with Intel®
AES New Instructions (Intel® AES-NI), Intel® Quick Assist Technology and
Intel® Streaming SIMD Extension (Intel®SSE) for hardware accelerated data
encryption and decryption.
The platform supports four DDR3 1333/1600MHz unbuffered ECC or non-ECC
DIMM sockets up to 32GB of memory and offers powerful storage interface
supporting 2.5”/3.5" SATA 3.0 6Gbps hard drives and CompactFlash™, thus
granting the best network performance and maximum utilization. In order to
enhance network security performance, the PL-80500 offers optional Intel
Quick Assist technology that provides hardware-level cryptographic
acceleration, hence enabling the reallocation of CPU computing power for
higher-layer packet processing.
This platform offers 8 GbE to 16 GbE Ethernet ports via PCIe on the front
panel. To prevent network problems during unexpected shut downs, PL-80500
supports two segments of LAN bypass function through WDT and GPIO pin
definitions. For local system management, maintenance and diagnostics; the
front panel is equipped with dual USB 2.0 ports, one RJ-45 console port and
LED indicators that monitor power and storage device activities. Additionally,
the PL-80500 supports one PCIe x8 slot for add-on Ethernet module and one
PCIe x4 golden finger for standard PCIe card via a riser card.
1.2 Specifications
Processor System
Memory Technology Dual-channel, ECC/Non-ECC,
WIN Enterprises, Inc. Sep., 2014
CPU Support Intel® Atom C2000 family
processor, FCBGA (codenamed
Chipset
BIOS
Rangeley)
Intel C2000 family processor
AMI UEFI BIOS
un-buffered, DDR3/L 1333/1600MHz
User’s Manual
6
memory
Capacity Up to 32GB with 4 DIMM sockets
Expansion Expansion Slots - one PCIE x8 slot for add-on Ethernet
module
- one PCIE x4 golden finger for
standard PCIE slot (optional Riser
card)
Ethernet
H/W Acceleration Security Processor Optional module with Cavium NITROX
Storage
I/O
Power Supply Watt 1U ATX single power supply
Mechanical and
Environment
GbE Ethernet Eight Copper GbE ports, Marvell
88E1543 via SGMII, Intel 82580 via
PCIe x4
2~8 GbE ports (optional add-on
Ethernet module)
LAN Bypass two pairs bypass
PX CN16xx.
SATA Internal HDD bay support one 3.5” or
two 2.5” SATA HDD
Compact Flash Socket One CompactFlash
USB One external USB 2.0 Dual port
One internal USB 2.0 (5x2 pin header)
Serial One RJ45 Console port (COM1)
One internal 5x2 pin header (COM2)
Form Factor 1U rack-mount
LCD Module one 16x2 LCM
TM
Type II
Weight 1pc/CTN, 10kgs, 55.5cm(W) x 54cm(D) x 22.5cm(H)
WIN Enterprises, Inc. Sep., 2014
Keypad Four buttons keypad
LED One Power LED (Green)
One Status LED (Green/ Yellow)
One HDD LED (Yellow)
Two Bypass LED (Red)
Dimension（W x D x H）
Operating Temperature Operating: 0 ~ 40°C ( 32 ~ 104°F )
Storage Temperature -20 ~ 75°C (-4 ~ 167°F)
Humidity 10 ~ 85% relative humidity,
430mm (W) x 350mm (D) x 44mm (H)
(16.9”W x 13.8”D x 1.7”H)
non-operating, non-condensing
User’s Manual
7
Certification CE/FCC
1.3 Order Information
We offer some accessories for PL-80500 appliance for customer need.
PL-80500A-O24 1U Rack-Mount Intel® Atom C2758 2.4GHz 8 Cores Processor Network
System, 8 Copper GbE, SATA, CF, LCM, PCI-E, Quick Assist
PL-80500B-Q24 1U Rack-Mount Intel® Atom C2538 2.4GHz 4 Cores Processor Network
System, 8 Copper GbE, SATA, CF, LCM, PCI-E
Optional
R168 Expansion module with 4 Copper GbE, Intel 82580EB, PCIE 2.0
Two pair bypass function (option)
R169A Expansion module with 4 SFP GbE, Intel 82580EB, PCIE 2.0
R171A Expansion module with 8 Copper GbE, Intel 82580EB, PCIE 2.0
R175 Expansion module with 4 Copper GbE, Intel 82574L/82583V, PCIE x1,
2 pair bypass
R175C Expansion module with 4 Copper GbE, Intel 82574L/82583V, PCIE x1
R186A Expansion module with 4 SFP ports & 4 Copper GbE ports, Intel
82580EB
R186B Expansion module with 4 SFP ports & 4 Copper GbE ports with two pair
bypass, Intel 82580EB
R188A Expansion module with Two 10GbE SFP+ ports, Intel 82599ES
R199A IPMI Module, PCIE x 1, Aspeed AST2150 Chip
R297
R298 Expansion module with Cavium 1610 and 4 Copper GbE
DK002 Cable development kit:
Expansion module with 4 Copper GbE ports, Intel I211AT
Two pair bypass function (option)
CB-CO5204-00 Cross over 2M
CB-DB9200-01 Null modem cable 2M
CB-EC5200-00 Ethernet cat.5 cable 2M
CB-IPS200-00 KBMS cable, 15CM
CB-IUSB2B-00 USB cable, 25CM
CB-IVGA01-00 VGA cable, 20CM
CB-RJDB91-00 RJ-45 to DB-9 cable 2M
WIN Enterprises, Inc. Sep., 2014
User’s Manual
8
1.4 Packaging
Please make sure that the following items have been included in the package
before installation.
1. PL-80500 Appliance
2. Quick Installation Guide (Optional)
3. Cables (Optional)
4. CD-ROM that contains the following folders:
(1) Manual
(2) System Driver
(3) Ethernet Driver
(4) Utility Tools
If any of the above items are missing or damaged, please contact your dealer
or retailer from whom you purchased the PL-80500. Keep the box and carton
when you ship the PL-80500. After you unpack the goods, inspect and make
sure the packaging is intact. Do not plug the power adapter to the appliance of
PL-80500 if you find it's damaged.
Note: Keep the PL-80500 in the original packaging until you start installation.
1.5 Precautions
Please make sure you properly ground yourself before handling the PL-80500
appliance or other system components. Electrostatic discharge can be easily
damage the PL-80500 appliance.
Do not remove the anti-static packing until you are ready to install the
PL-80500 appliance.
Ground yourself before removing any system component from it protective
anti-static packaging. To ground yourself, grasp the expansion slot covers or
other unpainted parts of the computer chassis.
Handle the PL-80500 appliance by its edges and avoid touching its
components.
WIN Enterprises, Inc. Sep., 2014
9
1.6 System Layout
User’s Manual
PL-80500 Front Side
Power supply HDD bay (optional)
DDR3 Socket
CPU
CF
WIN Enterprises, Inc. Sep., 2014
PCIe slot for
Ethernet module
10
1.7 Board Dimensions:
User’s Manual
WIN Enterprises, Inc. Sep., 2014
User’s Manual
11
Chapter 2. Connector/Jumper Configuration
2.1 Connector/Jumper Location and Definition
Connector Define Connector Define
CN1 ATX Power Switch Pin Header CN21 LAN7/LAN8 connector
CN2 80 port connector CN22 Reset connector
CN3 ATX +12V power connector
CN23 USB connector (Dual)
(8-Pin)
CN4 SPI connector CN24 LAN1 connector
CN5 SATA connector CN25 LAN2 connector
CN6 SATA connector CN26 LAN3 connector
CN7 SATA power connector CN27 LAN4 connector
CN8 Mini PCIE connector CN28 COM1 connector (RJ45)
CN9 ATX power connector (24-Pin) LED1 Rear Side LEDs
CN10 PEX8 SLOT SW1 Button for GPI or Reset
CN11 Case open connector JP1 DDR Voltage Selection
(1.5V/1.35V)
CN12 Debug GPIO connector JP2 5V power for FG1
CN13 PGO connector JP3 5V power for CN10
CN14 PS2 KB/MS connector JP4 LAN1 & LAN2 Bypass Selection
CN15 COM2 connector (Header) JP5 Clear CMOS
CN16 PGI connector JP6 LAN3 & LAN4 Bypass Selection
CN17 LCM connector JP7 AT/ATX Selection
CN18 USB connector (2.54mm
Watchdog Function Selection
Header) JP8
CN19 Keypad connector JP9 SW1 Function Selection
CN20 LAN5/LAN6 connector
WIN Enterprises, Inc. Sep., 2014
User’s Manual
12
WIN Enterprises, Inc. Sep., 2014
User’s Manual
13
Pin Define
1
2
2.2 Connector and Jumper Setting
CN1
：：：：
ATX Power Switch Pin Header
5VSB
SIGNAL
CN3
：：：：
ATX +12V Power Connector (8Pin)
Pin Define Pin Define
1 Ground 5 +12V
2 Ground 6 +12V
3 Ground 7 +12V
4 Ground 8 +12V
CN5,6,7
：：：：
SATA Connector
1
2
3
4
5
Pin
Signal
Ground
TXP
TXN
Ground
RXN
FAN 1 /2 /3 /4 /5 /6 : FAN Connector
WIN Enterprises, Inc. Sep., 2014
6
7
RXP
Ground
Loading...