WIN Enterprises PL-80470 User Manual

User’s Manual

Custom Embedded Solutions

PL-80470

Networking Appliance

1U Rack-Mount Intel® Sandy/Ivy Bridge Core i7/i5/i3
Network System, 6 Copper GbE, SATA, CF, LCM, PCI-E,
Bypass

User’s Manual

Version 1.0a, 212

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

1

User’s Manual

Custom Embedded Solutions

© Copyright 2013. All Rights Reserved

Manual Edition 1.0a, Aug , 2013

This document contains proprietary information protected by copyright. All rights are reserved; no

part of this manual may be reproduced, copied, translated or transmitted in any form or by any means

without prior written permission of the manufacturer.

The content of this document is intended to be accurate and reliable; the original manufacturer assumes

no responsibility for any inaccuracies that may be contained in this manual. The original

manufacturer reserves the right to make improvements to the products described in this manual at any

time without prior notice.

Trademarks

IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International business Machine

Corporation

Award is a trademark of Award Software International, Inc

Intel is a trademark of Intel

RTL is a trademark of Realtek

VIA is a trademark of VIA Technologies, Inc

Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered trademarks of

Microsoft Corporation

All other product names mentioned herein are used for identification purpose only and may be

trademarks and/or registered trademarks of their respective companies

Limitation of Liability

While reasonable efforts have been made to ensure the accuracy of this document, the manufacturer

and distributor assume no liability resulting from errors or omissions in this document, or from the use

of the information contained herein.

For more information on PL-80470 or other WIN ENTERPRISES products, please visit our website

http://www.win-ent.com.

For technical support send your inquiries to [e-mail].

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

2

User’s Manual

Custom Embedded Solutions

Table of Contents

Chapter 1. General Information ....................................................................... 4

1.1 Introduction ................................................................................................... 4

1.2 Specifications ................................................................................................ 4

1.3 Ordering Information ..................................................................................... 5

1.4 Packaging ...................................................................................................... 6

1.5 Precautions .................................................................................................... 6

1.6 System Layout ............................................................................................... 7

1.7 Board Dimensions ......................................................................................... 8

Chapter 2. Connector/Jumper Configuration ............................................... 10

2.1 Connector/Jumper Location and Definition.................................................. 10

2.2 Connector and Jumper Setting ..................................................................... 12

2.3 CompactFlashTM Card Socket Pin Define................................................... 26

Chapter 3. BIOS Setup................................................................................... 27

3.1 Quick Setup ................................................................................................. 27

3.2 Entering the BIOS Setup Utility................................................................... 28

3.3 Menu Options .............................................................................................. 30

3.4 Advanced Menu........................................................................................... 31

3.5 Chipset Menu .............................................................................................. 46

3.6 Boot Menu................................................................................................... 51

3.7 Security Menu ............................................................................................. 53

3.8 Save & Exit Menu ....................................................................................... 54

Chapter 4. Utility & Driver Installation ........................................................... 56

4.1 Operation System Supporting ...................................................................... 56

4.2 System Driver Installation............................................................................ 57

4.3 LAN Driver Installation ............................................................................... 57

Appendix A: Cable Development Kit................................................................. 58

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

3

User’s Manual

Custom Embedded Solutions

Chapter 1. General Information

1.1 Introduction

The PL-80470 is a 1U rackmount hardware platform designed for high

performance network service applications that supports Intel Sandy/Ivy Bridge

Core™ i7/i5/i3 processors with Intel® Advanced Vector Extensions and Turbo

Boost Technology.

The platform supports two DDR3 1066/1333MHz unbuffered non-ECC DIMM

sockets with memory up to 16GB. In order to provide the best network

performance and best utilization, the powerful storage interfaces support one

3.5" or two 2.5” SATA HDD, one mSATA and one CompactFlash™.

This platform supports a range of 6 GbE to 14 GbE Ethernet ports via PCI-E by

8 accessible on the front-panel. To prevent network problems when the

platform shuts down PL-80470 supports two segments of LAN bypass function

through WDT and GPIO pin definitions. The front panel also has dual USB 2.0

ports, one RJ-45 console port and LED indicators that monitor power and

storage device activities for local system management, maintenance and

diagnostics. In addition, the PL-80470 features one PCI-E x8 slot or one PCI-E

x8 Golden Finger connector to support an optional Ethernet module or PCI-E

card.

1.2 Specifications

Processor System

Memory

Expansion Expansion Slots One PCI-E x8 slot for expansion module

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

CPU Support Single Intel® Sandy Bridge

Xeon E3/Core i7/i5/i3 processors,

LGA1155

Chipset

DMI Up to 2.5GT/s

BIOS

Technology Dual-channel, ECC/Non-ECC,

Capacity Up to 16GB with 2 DIMM sockets

Intel H61 PCH

AMI UEFI BIOS

un-buffered, DDR3 1066/1333MHz

memory

One PCI-E x8 golden finger for

4

User’s Manual

Custom Embedded Solutions

expansion module (optional Riser card)

Ethernet GbE Ethernet Six RJ45 GbE ports, Intel I211, PCI-E

x1, with two pairs bypass function

(optional)

2~8 GbE ports (optional expansion

module)

Storage

I/O

Power Supply Watt ATX power supply

Mechanical and

Environment

Weight 1pc/CTN, 10kgs, 55.5cm(W) x 54cm(D) x 22.5cm(H)

Certification CE/FCC

SATA Internal HDD bay support one 3.5” or

two 2.5” SATA HDD

Compact Flash Socket One CompactFlash

USB One External Dual USB2.0

One internal USB 2.0 (5x2 pin header)

Serial One RJ45 Console port (COM1)

One internal header for second console

(COM2)

Form Factor 1U rack-mount

LCD Module One 16x2 LCM

Keypad Four buttons keypad

LED One Power LED (Green)

One HDD LED (Yellow)

Two Bypass LED (Green)

Dimension（W x D x H）

Operating Temperature Operating: 0 ~ 40°C ( 32 ~ 104°F )

Humidity 10 ~ 85% relative humidity,

435mm (W) x 400mm (D) x 44mm (H)

(17.1” W x 15.8” D x 1.7” H)

non-operating, non-condensing

TM

Type I/II

1.3 Ordering Information

We offer some accessories for PL-80470 appliance for customer need.

PL-8047A 1U Rack-Mount Intel® Sandy/Ivy Bridge Core i7/i5/i3 Network System, 6

Copper, LCM, PCI-E, Bypass

DK001 Cable development kit

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

5

User’s Manual

Custom Embedded Solutions

1.4 Packaging

Please make sure that the following items have been included in the package

before installation.

1. PL-80470 Appliance

2. Quick Installation Guide (Optional)

3. Cables (Optional)

4. CD-ROM that contains the following folders:

(1) Manual

(2) System Driver

(3) Ethernet Driver

(4) Utility Tools

If any of the above items is missing or damaged, please contact

[e-mail]. Retain the box and carton for safe shipping and storage.

After you unpack the box inspect everything and make sure the contents are

intact. Do not plug in the power adapter of the appliance if you find it damaged.

Note: Keep the PL-80470 in the original packaging until you start installation.

1.5 Precautions

Please make sure you properly ground yourself before handling the PL-80470

appliance or other system components. Electrostatic discharge can be easily

damage the PL-80470 appliance.

Do not remove the anti-static packing until you are ready to install the

PL-80470 appliance.

Ground yourself before removing any system component from its protective

anti-static packaging. To ground yourself, grasp the expansion slot covers or

other unpainted parts of the computer chassis.

Handle the PL-80470 appliance by its edges and avoid touching the

components on it.

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

6

User’s Manual

Custom Embedded Solutions

1.6 System Layout

PL-80470 Front Side

CPU DDR3 Socket Power supply HDD bay (optional)

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

LCD Module

CF

7

PCIe slot for

Ethernet module

User’s Manual

Custom Embedded Solutions

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

8

User’s Manual

Custom Embedded Solutions

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

9

User’s Manual

Custom Embedded Solutions

Chapter 2. Connector/Jumper Configuration

2.1 Connector/Jumper Locations and Definitions

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

10

User’s Manual

Custom Embedded Solutions

Connector Define Connector Define

FAN 1 FAN Connector CN16 Reset Pin Header

FAN 2 FAN Connector CN17 LPC Pin Header

FAN 3 FAN Connector CN18 COM2 Box Header

FAN 4 SMART FAN Connector CN19 USB Connector (2 ports)

FAN 5 SMART FAN Connector CN20 COM1 RJ45 Connector

FAN 6 SMART FAN Connector CN21 Giga LAN RJ45 Connector

CN1

ATX SWITCH

Pin Header

CN22 Giga LAN RJ45 Connector

CN2 +12V Power Connector(8Pin) CN23 Giga LAN RJ45 Connector

CN3 ATX Power Connector(24Pin) CN24 Giga LAN RJ45 Connector

CN4 GPI Pin Header CN25 Giga LAN RJ45 Connector

CN5 GPO Pin Header CN26 Giga LAN RJ45 Connector

CN6 SATA Connector CN27 PCI-E x8 Golden Finger

CN7 SATA Connector JP1 Power on type

CN8 SPI Pin Header JP2 VCCSA_VID

CN9 VGA Pin Header JP3 PCI-E Golden Finger +5V

CN10 MSATA JP4 CMOS MODE

CN11 USB Pin Header (2 ports) JP5 PCI-E SLOT +5V

CN12 PCI-E x8 Slot JP6 LAN3-4 Bypass

CN13 PS2 KB/MS JP7 LAN1-2 Bypass

CN14 LCM Keypad Pin Header JP8 Watchdog function

CN15 LCM Pin Header JP9 Reset mode for SW1

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

11

User’s Manual

Custom Embedded Solutions

2.2 Connector and Jumper Setting

FAN 1 /2 /3 /4 /5 /6 : FAN Connector

Pin Define

1 GND

2 +12V

3 Speed Detect

CN1

：：：：

ATX SWITCH Pin Header

Pin Define

1 5VSB

2 SIGNAL

CN2

：：：：

+12V Power Connector (8Pin)

Pin Define Pin Define

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

12

User’s Manual

Custom Embedded Solutions

4 Ground 8 +12V

CN3

：：：：

ATX Power Connector

Pin Define Pin

11 +3.3V 1 +3.3V

12 -12V 2 +3.3V

13 GND 3 GND

14 PS_ON* 4 +5V

15 GND 5 GND

16 GND 6 +5V

17 GND 7 GND

18 RSVD 8 POWER GOOD

19 +5V 9 5VSB

20 +5V 10 +12V

Define

21 +5V 11 +12V

22 +GND 12 +3.3V

CN4

：：：：

GPI Pin Header

Pin Define

1 GPI0

2 GPI1

3 GPI2

4 GPI3

5 GND

CN5

：：：：

GPO Pin Header

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

13

User’s Manual

Custom Embedded Solutions

Pin Define Pin Define

1 GPO4- 2 GPO4+

3 GPO5- 4 GPO5+

5 GPO6- 6 GPO6+

7 GPO7- 8 GPO7+

9 Ground 10 +5V

CN6,7

：：：：

SATA Connector

Pin Define

1 Ground

2 TXP

3 TXN

4 Ground

5 RXN

6 RXP

7 Ground

CN8

：：：：

SPI Pin Header

Pin Define Pin Define

1 +3.3V 2 Ground

3 CS# 4 SCLK

5 MISO 6 MOSI

7 NONE 8 IO

CN9

：：：：

VGA Pin Header

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

14

User’s Manual

Custom Embedded Solutions

Pin Define Pin Define

1

3

5

7

9

11

13

15

RED

BLUE

GND

GND

+5V

N/A

HSYNC

SCL

2

4

6

8

10

12

14

16

GREEN

N/A

GND

GND

GND

SDA

VSYNC

N/A

CN10

：：：：

mSATA Connector

Pin Define Pin Define

1 N/A 2

3 N/A 4

5 N/A 6 N/A

7 N/A 8 N/A

9

GND

10 N/A

11 N/A 12 N/A

13 N/A 14 N/A

15

17 N/A 18

19 N/A 20

21

23

25

27

29

31

33

GND

GND

RXP

RXN

GND

GND

TXN

TXP

16

22

24

26

28

30

32

34

+3.3V

GND

N/A

GND

N/A

RESET

+3.3V

GND

N/A

SMBCLK

SMBDAT

GND

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

15

User’s Manual

+3.3V_STBY

Custom Embedded Solutions

35

37

39

41

43

45

47

49

51

CN11

：：：：

Pin Define Pin Define

GND

GND

+3.3V

+3.3V

N/A 44

N/A 46

N/A 48

ACT_LED#

N/C

36

38

40

42

50

52

USB Pin Header (2 ports)

USBN

USBP

GND

N/A

N/A

N/A

N/A

GND

+3.3V

1 +5V 2 +5V

3 USB1N 4 USB2N-

5 USB1P 6 USB2P

7 Ground 8 Ground

9 N/A 10 Ground

CN12

：：：：

PCI-E x8 Slot

Pin Define Pin Define

A1 GND B1 +12V

A2 +12V B2 +12V

A3 +12V B3 +12V

A4 GND B4 GND

A5 +3.3V B5 SMB_CLK_R

ESUME

A6 +3.3V B6 SMB_DATA_

RESUME

A7 GND B7 GND

A8 +3.3V B8 +3.3V

A9 +3.3V B9 NC

A10

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

+3.3V B10

16

User’s Manual

Custom Embedded Solutions

A11

RESET B11 PE_WAKE

A12

A13 CLK_100MP B13

GND B12 PWROK

GND

A14 CLK_100MN B14 TX_0_DP

A15

A16 RX_0_DP B16

GND B15 TX_0_DN

GND

A17 RX_0_DN B17 VCC5_SLOT

A18

A19

A20

A21 RX_1_DP B21

A22 RX_1_DN B22

A23

A24

A25 RX_2_DP B25

A26 RX_2_DN B26

A27

A28

GND B18

GND

VCC5 B19 TX_1_DP

GND B20 TX_1_DN

GND

GND

GND B23 TX_2_DP

GND B24 TX_2_DN

GND

GND

GND B27 TX_3_DP

GND B28 TX_3_DN

A29 RX_3_DP B29

GND

A30 RX_3_DN B30 WatchDog

-Bypass

A31

A32

GND B31

GPIO55 B32

GPIO53

GND

A33 PCI-E_CFG2 B33 TX_4_DP

A34

A35 RX_4_DP B35

A36 RX_4_DN B36

A37

A38

A39 RX_5_DP B39

A40 RX_5_DN B40

A41

A42

A43 RX_6_DP B43

A44 RX_6_DN B44

GND B34 TX_4_DN

GND

GND

GND B37 TX_5_DP

GND B38 TX_5_DN

GND

GND

GND B41 TX_6_DP

GND B42 TX_6_DN

GND

GND

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

17

User’s Manual

Custom Embedded Solutions

A45

GND B45 TX_7_DP

A46

A47 RX_7_DP B47

GND B46 TX_7_DN

GND

A48 RX_7_DN B48 PCI-E_CFG1

A49

GND B49

GND

CN13

：：：：

PS2 KB/MS Pin Header

Pin Define Pin Define

1 KCLK 2 MCLK

3 KDAT 4 MDAT

5 N/A 6 N/A

7 PS2_GND 8 PS2_GND

9 PS2_VCC 10 PS2_VCC

CN14

：：：：

LCM KEYPAD Pin Header

Pin Define

1 ACK#

2 BUSY

3 PE

4 SLCT

5 Ground

CN15

：：：：

LCM Pin Header

Pin Define Pin Define

1 +5V 2 Ground

WIN Enterprises, Inc. [e-mail] www.win-ent.com [phone]

18