Winegard MA1000W User Manual 2

®

WINEGARD

®

MOTORIZED SENSAR ANTENNA

Model MA1000W

MADE IN U.S.A.

U.S. Patents D500,496 and 7,358,909

OPERATION MANUAL

CAUTION: This system is not for use with antenna in raised position
while vehicle is in motion.

Model MA1000W has white antenna head and white turret.

Unit packed as follows:
Motorized Mount with booms attached.
Antenna Head
Hardware Bag
Instructions
Antenna Power Supply
Power Cable
Control Cable
Coax Cable

1

Operation Instructions for Motorized Sensar

FIGURE 1

Controller
Panel

Turn Power

On/Off

Raise/Stow
Antenna

Indicates Antenna
is fully raised

Rotate

Antenna

Clockwise

NOTE: Blinking lights
indicate obstruction.

Control Panel Light and Button Functions:

(All three lights blink when obstruction occurs - See Trouble
Shooting)

Figure 1 shows control panel components. Operation is
simply a matter of pressing the button for the operation you
desire.

OPERATION

STEP 1: Press Power Button, light by button will come on.

One of the three middle lights will also turn on showing
antenna position.

STEP 2: Turn on power supply to antenna.

STEP 3: Press Raise/Stow Button. Motion light will turn on

and antenna will raise. When antenna has raised, the
motion light will turn off and the raised light will be on.

STEP 4: Press ROTATE counter clockwise button to rotate
unit towards signal. Motion light will turn on. You must hold
this button in to maintain rotation. View your TV Picture and
release button to stop antenna rotation when TV picture
appears to be the best quality for your location. NOTE: If

Indicates Antenna
is moving

Indicates Antenna is
in Travel Position

Rotate Antenna
Counter Clockwise

pressing button does not turn on Motion light, the antenna is
at it's maximum rotation or not in up position.

STEP 5: To view a different TV channel, switch TV to
channel you desire and press and hold either rotate button
until your TV picture appears to be the best quality for your
location.

To Stow Antenna:

STEP 6: Push RAISE/STOW button to stow antenna.

MOTION LED will be lit. The antenna will automatically
return to its home position before stowing. MOTION LED
will turn off. STOWED LED will turn on.

STEP 7: Push POWER Button on control panel and ON/
OFF button on wall plate power supply to turn antenna off.

NOTE: BEFORE MOVING RV, ANTENNA MUST BE IN
STOWED POSITION. VISIBLY CONFIRM ANTENNA IS
DOWN BEFORE MOVING.

2