Winegard HDA-200, HDA-100 User Manual

Ultra Low Noise
Distribution Amplifiers
Power
®
Jack
RF
Input
Winegard’s new HDA series of Distribution Amplifiers was designed to meet the market demand for a heavy duty, quality built, cost effective solution for the amplification and distribution of analog/digital broadcast signals from Off-Air and cable TV stations. Both the HDA-100 & HDA-200 are housed in an industrial grade, weather resistant enclosure. Each unit has an RF input, amplified RF output, and DC power insertion jack. Each amplifier also provides a 5-42 MHz 2-way bi-pass.
The Winegard HDA-100 is a single RF input, 15dB gain, single RF output, with a 5-42 MHz 2-way bi-pass at -2 dB loss.
The HDA-200 has a single RF input, 24 dB gain, single RF output, with a 5-42 MHz 2-way bi-pass at +12 dB gain. The HDA-200 has 0-18 dB gain control and 20 dB “switchable” FM trap to eliminate those offending FM radio stations. These features, when combined with the 12 dB of amplified gain for the 2 way 5-42 MHz return path make the HDA­200 a superior solution for the “Techno” savvy consumer.
See reverse side for typical power installations.
HDA-100 SPECIFICATIONS
HDA-100
15 dB Gain 54-1000 MHz
RF
Output
-2 dB 2-Way Bi-pass
Power
Jack
HDA-200
24 dB Gain 54-1000 MHz
RF
Output
Variable gain Control 0-18 dB Switchable FM trap +12 dB gain on 2-Way Bi-pass
HDA-200 SPECIFICATIONS
RF
Input
HDA-100
Bandpass Forward ............................... 54-1000 MHz
Bandpass Reverse ............................... 5-42 MHz
Max Output per Channel (80 ch CATV) ..... +25 dBmV (Note 1)*
Max Output per Channel (16 ch off-air) ...... +40 dBmV (Note 2)**
Max Input per Channel (80 ch CATV) ........ +10 dBmV (Note 1)*
Max Input per Channel (16 ch off-air) ......... +25 dBmV (Note 2)**
Max Input Reverse Amp ....................... n/a
Gai n .......................................................15 dB
Gain Control .......................................... n/a
Reverse Gain ........................................ -2 dB
Noise Figure .......................................... 3 dB
FM Trap .................................................n/a
Operating Temp .................................... -30° to 140° F
Power Supply Voltage ..........................12VDC - 200 mA
Housing Dimensions ............................. 4.90” W x 3.92” H x 1.5” D
HDA-200
Bandpass Forward ............................. 54-1000 MHz
Bandpass Reverse ............................. 5-42 MHz
Max Output per Channel (80 ch CATV) ... +25 dBmV (Note 1)*
Max Output per Channel (16 ch off-air) .... +40 dBmV (Note 2)**
Max Input per Channel (80 ch CATV) ...... +8 dBmV (Note 1)*
Max Input per Channel (16 ch off-air) ....... +23 dBmV (Note 2)**
Max Input Reverse Amp ....................... +23 dBmV (at 1dB comp)
Gai n ..................................................... 24 dB
Gain Control ........................................ 0-18 dB
Reverse Gain ...................................... +12 dB
Noise Figure ........................................ 4.5 dB (at max gain)
FM Trap ............................................... -20 dB (95-108 MHz)
Operating Temp .................................. -30° to 140° F
Power Supply Voltage ........................ 12VDC - 200 mA
Housing Dimensions ........................... 4.90” W x 3.92” H x 1.5” D
Weight ................................................... 0.6 lbs.
Weight ................................................. 0.6 lbs.
*Note (1) at -62dB ctb, -56dB cso **Note (2) at -46dB cross modulation
HDA-100/200 TYPICAL INSTALLATION - NO POWER INSERTER
ANTENNA IN (54-806 MHz) / CABLE IN (5-1000 MHz)
SHORT COAX CABLE
POWER
TRANSFORMER
120 VAC
REQUIRED
RF IN
HDA
POWER IN
AMPLIFIER
RF OUT/ POWER IN
COAX CABLE LENGTH AS REQUIRED
TO TV
Figure A
HDA-100/200 TYPICAL INSTALLATION
POWER INSERTER USED FOR REMOTE POWER APPLICATION
WHEN NO 120 VAC CLOSE BY (EXAMPLE: ATTIC, CEILING, CRAWL SPACE, ETC.)
ANTENNA IN (54-806 MHz)/ CABLE IN (5-1000 MHZ)
RF IN
POWER IN
COAX CABLE CUT TO DESIRED LENGTH
POWER
TRANSFORMER
120 VAC
REQUIRED
HDA
AMPLIFIER
RF OUT POWER IN
COAX CABLE LENGTH AS AS REQUIRED, MAXIMUM LENGTH: 200’ COPPER WELD RG-6 400’ SOLID COPPER RG-6
TO AMP
TO TV
POWER
INSERTER
TO DISTRIBUTION SYSTEM (TV SET, ETC.) COAX CABLE LENGTH AS REQUIRED
Figure B
Winegard Company • 3000 Kirkwood St. * Burlington, IA 52601-2000 • 319/754-0600 Fax 319/754-0787 • www.winegard.com Printed in U.S.A. © 2004, 2005 Winegard Company WC-819 Rev. 5/05
Loading...