winefit EVO User Manual

ENGLISH
\\\
1
Wine dispenser
User manual
Winefit EVO
ENGLISH
SAFETY REGULATIONS
The machine can only be used correctly after having read this manual which also contains the basic safety rules set out below:
SAFETY INFORMATION
This appliance is intended for use in domestic and similar applications such as:
The kitchen area for the staff of shops, offices and other working environments;
o Farms and clients in hotels, motels and other residential environments; o The bed and breakfast; o Catering services and similar applications not for retail
The appliance may be used by children aged not less than 8 years and by persons with reduced physical, sensory or mental capacities, or lack of experience or knowledge, provided they are supervised or after they have received instructions regarding the safe use of the device and the understanding of the dangers inherent to it. Children should not play with the appliance. The cleaning and maintenance intended to be carried out by the user must not be carried out by children without Supervision.
This appliance contains a small amount of 50g of propane R290, a natural gas with high environmental compatibility which, however, is also combustible. When transporting and installing the appliance, be careful not to damage any part of the refrigeration circuit.
Warning; Fire hazard/flammable materials. Important symbols and precautions for safety:
If water is detected inside the appliance, unplug the power cord and contact a Dealer's service centre, failure to comply with this warning may result in electric shock, fire, or problems with the product or injury.
The appliance must be grounded properly.
Never connect the power cord to an improperly grounded outlet and make sure it
complies with local and national regulations.
If the power cord is damaged, request a replacement from the manufacturer, a service technician, or a qualified technician to avoid potential hazards.
Do not store explosive substances in this appliance, such as aerosol cans with flammable propellant.
Do not use mechanical devices or other means to accelerate the defrosting process other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside food storage compartments if these
appliances are not of the type recommended by the manufacturer.
ENGLISH
\\\
3
IMPORTANT WARNING SIGNS FOR INSTALLATION
Do not place this appliance in direct sunlight or expose it to heat emitted from stoves, radiators or other household appliances.
Do not install this appliance in damp, greasy or dusty places or expose it to direct sunlight or water (raindrops)
Do not connect multiple devices in a single multi-power outlet. This appliance should always be connected to a single electrical outlet with a nominal voltage corresponding to that indicated on the Nameplate. This makes it possible to obtain optimum performance and also avoids the overload of the domestic electrical system which, in case of overheating of the electrical wires, could cause fire.
Install the appliance on a flat surface that can sustain its weight. Failure to comply with this precaution may result in vibration, displacement, noise or Malfunction.
Do not install the appliance near a heater or inflammable material.
Do not install this unit in a location where there may be gas leaks, this may cause
electrical shock or fire.
The appliance must not be exposed to rain.
Keep the ventilation openings in the housing of the appliance or in the recessed
structure free of obstructions.
NOTE: to obtain an electronic version of the user manual, please forward the request to the following address: Info@winefit.it
ENGLISH
INTRODUCTORY GUIDE TO THE INSTALLATION OF THE APPLIANCE
To avoid hazards due to the instability of the appliance, this must be fixed according to the Instructions.
Leave sufficient space to install the appliance on a flat surface.
Follow the minimum distances required to install the device in a dedicated bin.
Refer to the following dimensions in the Image:
If the device is inserted in a closed place, install an electrically operated fan to facilitate the extraction of hot air from the rear compartment of the appliance, the minimum required flow rate is 200 m3/h with a static pressure of 84 Pa.
ENGLISH
\\\
5
Do not place anything on top of the device.
The maximum opening of the doors is shown below in the following images never
open more than specified:
Place the device taking into account the size of the doors opening
ENGLISH
The maximum opening of the front console is shown below in the following image never open more than specified:
For a correct levelling, position the device on a perfectly flat surface and adjust the feet, indicated in the following images, by screwing or loosening them until the stability is achieved.
ENGLISH
7
\\\
When positioning the device, make sure that the power cord is not entangled.
Be careful not to crush or damage the power cord while positioning it, this
may cause electrical shock or fire.
The device must be positioned in such a way as to make the power cord plug accessible.
Deterioration of the insulating material of the electrical parts may cause electric shock or fire.
Do not connect the device in a single multi-power socket with other appliances.
ENGLISH
INDEX
INTRODUCTION………………………………………………………………………………………………………… 10
GENERAL INFORMATION………………………………………………………………………………………………………….. 10
GENERAL DESCRIPTION…………………………………………………………………………………………………………... 10
MAINCOMPONENTS (FIGURE1)…………………………………………………………………………………………………. 10
CAPACITIVE KEYBOARD(FIGURE2)……………………………………………………………………………………………. 11
NOTES BEFORE USE………………………………………………………………………………………………………………... 11
HOW TO PREPARE WINEFIT EVO………………………………………………………………………………………………… 12
HOW TO SWITCH ON THE APPLIANCE………………………………………………………………………………………….. 12
HOW TO INSERT THE CYLINDERS……………………………………………………………………………………………….. 14
HOW TO PREPARE THE CAP……………………………………………………………………………………………………… 15
HOW TO INSERT THE CORK INTO THE BOTTLE OF WINE………………………………………………………………….. 16
HOW TO REPLACE THE 17MM EXPANDABLE WITH A NEW ONE AND HOW TO PUT THE 19MM EXPANDABLE…………………………………………………………………………………………………………… 17
BOTTLE INSERTION………………………………………………………………………………………………………………. 21
HOW TO REPLACE THE CYLINDERS…………………………………………………………………………………………….. 23
HOW TO USE WINEFIT EVO………………………………………………………………………………………………………... 24
MAIN MENU……………………………………………………………………………………………………………………. 24
WINE SUMMARY……………………………………………………………………………………………………………… 24
INSERT/REPLACE BOTTLE………………………………………………………………………………………………………… 25
SETTINGS……………………………………………………………………………………………………………… 26
LANGUAGE SETTINGS……………………………………………………………………………………………………………… 26
DATE AND TIME………………………………………………………………………………………………………………………. 27
UNIT OF MEASURE………………………………………………………………………………………………………………... 27
USING THE MACHINE………………………………………………………………………………………………………………... 28
CURRENCY…………………………………………………………………………………………………………….. 28
CELL TEMPERATURE………………………………………………………………………………………………….. 29
SELECTION OF GLASS DOSE……………………………………………………………………………………………………… 29
PASSWORD……………………………………………………………………………………………………………. 30
COLOR MANAGEMENT………………………………………………………………………………………………………… 30
WASHING DISPENSERS…………………………………………………………………………………………………...………. 31
RELOAD PREPAID CARD (IF AVAILABLE)………………………………………………………………………………………. 33
RESET, RELOAD AND READ PREPAID CARD FROM PC (IF AVAILABLE)………………………………………………... 33
CREDIT READING AND PREPAID CARD RECHARGE FROM THE MACHINE (IF AVAILABLE)……………..........……. 35
WINE DELIVERY MENU………….…………………………………………………………………………………………………... 37
HOW TO USE WITH CARD AND WITHOUT CARD (IF AVAILABLE)…………………………………………………………. 37
NOTIFICATIONS………………………………………………………………………………………………………. 40
WASHING OF DRIP TRAY................................................................................................................................. 41
ENGLISH
\\\
O
P Q
9
FIG. 1
FIG. 2
ENGLISH
INTRODUCTION
Winefit EVO is a device that is used for the preservation of bottled wines, using an inert gas such as argon and an air-conditioned bottle housing. Whenever a bottle of wine is opened, the special cap is applied, which keeps it hermetically sealed. The bottle with the cap is inserted in one of the 4 available slots of the machine, the latter will keep it at the right temperature of preservation and will put it under pressure until the wine is low; The bottle is not pressurized until the first dose is dispensed through the Winefit EVO machine. The application of Winefit EVO concerns the field of oenology, or where there is a consumation by glass of bottled wine: wineries, restaurants, bars, hotels, wine cellars or for private use.
GENERAL INFORMATION
Winefit EVO has the following dimensional characteristics:
Height: 617.0 mm Width: 562.0 mm
Depth: 465.0 mm Weight: 60.0 kg
GENERAL DESCRIPTION
MAIN COMPONENTS (figure 1)
WINEFIT EVO
CYLINDERS
CONTROL PANEL/BOTTLE EMPLACEMENT
GRID
DRIP TRAY
CAP
WINE BOTTLE
ENGLISH
\\\
CAPACITIVE KEYBOARD (Figure 2)
FIRST BOTTLE SWITCHES
SECOND BOTTLE SWITCHES
THIRD BOTTLE SWITCHES
FOURTH BOTTLE SWITCHES
CARD READING DEVICE
PROXIMITY SENSOR
LCD DISPLAY
“TASTING” AUTOMATIC DISPENSING BUTTON
HALF GLASS” AUTOMATIC DISPENSING BUTTON
"FULL GLASS" AUTOMATIC DISPENSING BUTTON
BUTTON FOR BOTTLE WASHING.
NOTES BEFORE USE
Before using Winefit EVO read the manual carefully and keep it in a safe place. Do not remove pages from the manual, do not write on the manual pages; Spaces for notes and notes are provided at the end of chapters.
!
Before connecting the socket to the Winefit EVO's main switch, Check that
the voltage corresponds to that of the local Network.
!
Place Winefit EVO on a horizontal and stable plane.
!
Winefit EVO is not intended to be used by persons whose physical,
sensory or mental capacities are reduced, or with lack of experience or knowledge, unless they have been able to benefit, through the intermediary of a responsible person safety, supervision or instructions concerning the use of the appliance.
!
Children must be supervised to ensure that they do not play with
Winefit EVO.
!
Winefit EVO is not suitable for outdoor use.
!
The minimum and maximum ambient temperature for winefit EVO
installation are: 10 ° C and 35c °.
!
The minimum and maximum ambient temperature for the correct
operation of Winefit EVO are: 10 ° C and 35c °.
!
Winefit EVO is not suitable for installation in areas where a water jet can be
used; The appliance must not be cleaned with a water jet.
ENGLISH
HOW TO PREPARE WINEFIT EVO
HOW TO SWITCH ON THE DEVICE
!
Place Winefit EVO on a
horizontal and stable plane.
!
Plug the power cord into a local socket of
the current with the same voltage as the
WinefitEVO label.
ENGLISH
\\\
!
Now press the console under the display, the Push-pull system will unlock it and can rotate upwards as shown in the Figure.
!
There is another switch behind the
console, indicated by the arrow in the Figure. Once the Winefit EVO switch is pressed, it will light up.
The Touch-screen display, after the screen with the logo, will display this screen:
No gas cylinder in
Enter now to activate the
winestation.
Loading...
+ 29 hidden pages