Wind & Weather RG1736 User Manual
Table of Contents
Introduction 3
Product Overview 4
Remote Rain Gauge 9
Remote Sensor 10
Before You Begin 11
Battery Installation 13
Remote Temperature Sensor 14
Main Unit 14
Low Battery Warning 14
How To Use the Table Stand 15
Getting Started 15
Remote and Indoor Temperatures 16
Auto-Scanning 16
Checking Remote Rainfall Data 17
Maximum and Minimum Temperature 18
Lost Communication 18
Transmission Collision 19
Calendar and Clock Display Modes 20
Manual Settings 20
Alarms 21
Snooze 23
Precautions 23
Specifi cations 24
FCC Statement 26
Declaration of Conformity 27
Standard Warranty Information 28
Wireless Rain and
Temperature Monitor
2
INTRODUCTION
ank you for selecting the Wind & Weather Wireless
Rain and Temperature Monitor. is device monitors
and displays rainfall data along with the indoor/out-
door temperature from up to three remote locations.
In this package you will fi nd:
Please keep this manual handy as you use your new
item. It contains practical step-by-step instructions,
as well as technical specifi cations and precautions you
should know.
PRODUCT OVERVIEW
MAIN UNIT—FEATURES
remote rain gauge to the main unit up to 100 feet (30
meters) away
remote temperature sensor to the main unit up to 100
feet (30 meters) away
or Italian
4
FRONT VIEW
A.
Weather and Time Information in a ree-Line
LCD Display
B.
ALARM button
• Toggles between the rainfall modes—current rainfall
data and rain alarm programming mode
• Activates the high rainfall alarm setting mode
MODE button
• Toggles between the rainfall modes—for the past
hour, 24 hours, and for the past 7 days
D.
UP (
) button
• Toggles between the rainfall modes—for the past
hour, 24 hours, and for the past 7 days
• Increases all function parameters; press and hold for
rapid increase
• Enables or disables rain alarm
E.
DOWN (
) button
• Toggles between the rainfall modes—for past hour,
for the past 24 hours, and for the past 7 days
• Decreases all function parameters; press and hold
for rapid decrease
• Enables or disables high rain alarm
• Enforces the remote rain gauge signal search
F.
MEMORY button
• Toggles between the rainfall memory modes—for
the past hour, 24 hours, and for the past 7 days
• Clears the memory
REAR VIEW
H.
MODE button
• Toggles between four clock modes—time with
seconds, time with the day of the week, Time Zone
6
programming and calendar
I .
UP (
) button
• Increases all time and temperature function
parameters
• Enables the time alarms
J .
DOWN (
) button
• Decreases all time and temperature function
parameters
• Disables the time alarms
• Enforces the remote temperature sensor signal
search
K.
ALARM button
• Toggles between the alarm modes—weekday alarm
W
S
Pre-AL
L.
MEMORY button
• Toggles between current, minimum and maximum
readings of the indoor and remote temperatures
• Clears the memory
M.
• Recalls a diff erent channel of the remote temperature
• Enables remote temperature channels auto scanning
feature
N.
SNOOZE/LIGHT button
• Enables backlight for 5 seconds
• Stops any alarm temporarily
BATTERY COMPARTMENT
• Uses 2 (two) UM-3 or AA 1.5V alkaline batteries
P.
WALL-MOUNT RECESSED HOLE
• Keeps the main unit on the wall
REMOVABLE TABLE STAND
• Keeps main unit in upright position on a fl at surface
REMOTE RAIN GAUGE—FEATURES
• Precipitation measurement
• Remote rainfall data transmission to the main unit
via 433 MHz signal
• 100 feet (30 meters) transmission range without
interference
• Built-in installation level
• Mounting hardware
• Non-corrosive protective screen
A.
RAIN GAUGE BUCKET
• Holds all rain gauge components
B.
KNOB
• Secures the top on the rain gauge bucket
RAIN GAUGE BUCKET FEET
• Allow securing the rain gauge on its place
REMOTE RAIN GAUGE
D.
FUNNEL-SHAPED TOP
• Contains battery compartment and rainfall counting
electronics
E.
BATTERY COMPARTMENT
• Holds 2 (two) AA-size batteries
F.
SCREWS
• Secure battery compartment cover
BUILT-IN LEVELER
• Allows leveling rain gauge on the surface
H.
BUCKET SEE-SAW MECHANISM
• Collects the rainfall in one of its containers and self-
empties once full
I.
PROTECTIVE SCREEN
• Protects the rain gauge funnel from debris
REMOTE SENSOR—FEATURES
• Remote temperature transmission to the main unit
via 433 MHz signal
• 100 feet (30 meters) transmission range without
interference
• LCD display of measured temperature
• ree transmission (3) channels selection
• Selection of the temperature display in °C or °F
• Case can be wall mounted using built-in hanger
A.
LED INDICATOR
• Flashes once when the remote temperature sensor
transmits a reading to the main unit
• Flashes twice when battery power is low
B.
BATTERY COMPARTMENT
• Holds two AA-size batteries
RESET
• Resets all readings
D.
• Selects the desired channel
E.
WALL-MOUNT RECESSED OPENING
• Keeps the remote temperature sensor on the wall
9
Loading...